ClayTech PSP530 User manual

ClayTech PSP530 Installation Manual 1
ntroller
CLAYTECH PSP530 - 810679

2 ClayTech PSP530 Installation Manual
Introduction
Benefits Features Cautions
• Light and compact - easy
to use
• Once primed and running
can pump down to very low
levels
• Quality pump materials
and construction to ensure
reliable operation
• Outlet can be
configured for vertical
or horizontal operation
• Not intended for
submersion greater than 3m
• Not intended for
continuous operation such
as water features or
fountains
• Not suitable for potable
water applications
• Not for use with
biological wastewaters
Warning - Electrical safety
Warning – Potential consequences of use outside of
intended application(s). Includes environmental condition
warnings
Mandatory warning
Warning to disconnect power
Read carefully
The pump must not be disposed of with normal household waste.
Dispose of in accordance with local environmental regulations.
Thanks for choosing the ClayTech PSP530 puddle pump, a manually operated
light duty, occasional use pump suitable for pumping mostly clean water with
minimal soft solids or other contamination.
The PSP530 is a ‘puddle sucker’ type. Once primed and pumping, it will pump
down to depths less than 3mm making it ideal for basement or garage drainage
applications.
The PSP530 is an uncomplicated electrical appliance, and the purpose of this
manual is both to ensure user safety and to prolong the lifespan of the product
by highlighting ‘best practice’.

ClayTech PSP530 Installation Manual 3
Technical Data
RATED POWER (W)
530W
RATED VOLTAGE
220 – 240V 50Hz
MAX. FLOW [LPM]
170 lpm
RATED CURRENT
2.0 Amps @ 230V
MAX. HEAD [M]
11m
POWER CABLE LENGTH
10m H07RNF
WORKING TEMPERATURE
<40°C
PROTECTION CLASS
IPX8
LIQUID TEMPERATURE
3 - 40°C
IMPELLERS
Single impeller
MAX. IMMERSION DEPTH
10m
HYDRAULIC BODY AlSi12 with industrial
grade coating
MAX. DIA. OF PARTICLE
< 2 mm
MOTOR DUTY
S1 Continuous
OUTLET
1” DN hose tail
MOTOR PROTECTION LEVEL
Class B
SEALS
Graphite/Ceramic
MOTOR PROTECTION
Auto resetting thermal
overtemp and overload AUTOMATIC FUNCTION
None.
Manual operation only
CAPACITOR
10UF +/-5% 450V
NET WEIGHT [KG]
Pump 13.5 kg
MOTOR SHAFT
SS 201
PACKAGE DIMENSION
230 x 230 x 270mm
Warnings
Prior to starting installation or any maintenance the pump must be
disconnected from the power supply.
Any changes or modifications, especially to the wiring, must be carried
out by suitably qualified personnel.
To avoid excessive thermal shock to the motor the pump should not
start more than 20 times in any one-hour period.
This appliance is not intended for use by persons (including children)
with reduced physical, sensory or mental capabilities, or lack of
experience and knowledge, unless they have been given supervision or
instruction concerning use of the appliance by a person responsible for
their safety. Children should be supervised to ensure that they do not
play with the appliance.
Running the pump without water or allowing the pump to run dry will
damage the seal voiding the warranty
NEVER use the PSP530 to pump:
•Corrosive, easily combustible,
aggressive, or explosive liquids
such as petroleum products
•Saltwater; acceptable pH 6.5 – 8.5
•Water with high sand or solids
content.
•Potable water including water
used in the preparation of food
•Biological wastewater

4 ClayTech PSP530 Installation Manual
Installation & Operating Instructions
The ClayTech PSP530 is a manually operated, light duty, occasional use pump
suitable for use pumping lightly soiled water containing some soft solids.
These pumps should never be used to pump flammable or corrosive fluids or
to be used in an area than may have explosive atmospheres, such as in the
presence of flammable liquids, gases or dust.
Avoid the use of adapter plugs. Unmodified plugs and matching sockets will
reduce risk of electric shock. Do not use the pump if safety devices are
damaged or unreliable. Never deactivate safety devices.
Take care with the power lead. Never use the lead for carrying, pulling or unplugging the
pump and keep the lead away from heat, oil, sharp edges or moving parts. Damaged or
entangled cords increase the risk of electric shock.
If it is necessary to use an extension cord, ensure it is suitable for outdoor use to
reduce the risk of electric shock.
Overly long or lightly rated extension cords can create a voltage drop
and shorten the working life of the pump
The pump should be connected to (10 amp) power and a residual current
device or RCD with a nominal trip current installed in compliance with the
requirements of AS/NZ 3000.
The pump has an automatic reset thermal overload protection built in. This thermal
overload will switch the motor off in an overload/overtemperature situation and will
automatically reset when the motor has cooled down.
Unplug the equipment from the mains before any interventions.
Install on a level surface
Maximum submergence 3m
If using flexible piping, take
care to ensure there are no
blockages or kinks.
Avoid using discharge piping
smaller than the outlet
Avoid liquid containing hard
solids or excessive silt
The LSC530 is turned on and
off manually.
It should never be left
running unattended
The outlet can be configured
for vertical or horizontal
discharge
Attach a lifting rope or chain to
the handle
Avoid lifting using the power
lead

ClayTech PSP530 Installation Manual 5
Trouble Shooting Guide
Symptom
Check
Suggested Actions
The motor does not start and
makes no noise.
Is the pump plugged in?
Check the electrical supply.
Pump does not deliver.
Does the impeller rotate?
Is it in good condition?
Is the pump inlet free?
The delivery head requested
may exceed the performance
of the pump or the discharge
pipe is too narrow.
Eliminate any reasons for
blockage.
Clean the pump inlet.
Ensure the pump is used
accordance with its technical
capabilities.
The pump stops suddenly
Check there is sufficient
water level?
Intermittent pump inlet
obstruction?
Has the pump run for a long
time without stopping?
(Thermal protection activated?)
Is the temperature of the liquid
less than 35°C?
Check the sump for water level
and any possible
contamination which could
interrupt water supply.
Disconnect the pump from the
mains and let it cool.
Observe the maximum
allowable temperature (40º).
Flow decreases
Is the pump inlet clean?
Is the impeller clean?
Ensure the discharge pipe is
not partially clogged.
Inspect and clean the
suggested areas.
Low flow or insufficient flow
Are you sure that the pump
inlet is not obstructed?
Is the impeller clean?
Are you sure that the outlet
pipe is not obstructed?
Is the diameter of the
discharge pipe big enough?
Clean the zone(s) concerned
and verify check valve (if
fitted).
Connect a pipe of a suitable
diameter.
Eliminate obstructions or kinks
in the discharge pipe.
Warranty
The pump warranty period is 1 year from the date of purchase.
Warranty applies to manufacturing or material defects.
The unit must always be handled properly according to instruction manual.
The unit must not have been modified or have been repaired by any person other than authorized service agents
Warranty no longer applies in the following cases:
•Non-compliance with the instructions especially non-protection against freezing, pumping sand, dry running,
incorrect electrical connection
•After attempting to repair the unit
•Changes in the technical elements of the pump
•Use of replacement parts other than original.
•Damage / malicious (dropping or external damage
•Inappropriate use (e.g., industrial, continuous operation), and in particular passage of hard and heavy particles
(stones, or sticks), passage of an excessive amount of sand, salt water, water with high lime content, liquid
with a high vegetable matter content i.e. grass or leaves
•Lack of maintenance or cleaning
A repair or exchange with a new product during the warranty period does not extend the original warranty period.
Any claim against warranty on a ‘return to base’ basis and must be accompanied by all accessories. Proof of purchase
and proof of sale will be required along with a full and clear explanation of the issue or observed symptoms/behaviours.
Installation photos will expedite the process.

6 ClayTech PSP530 Installation Manual
Warranties – Terms and Conditions
This warranty is given in addition to the consumer guarantees found within the Australian
Competition and Consumer Act 2010 (Cth) for goods purchased in Australia and the
Consumer Guarantees Act 1993 NZ for goods purchased in New Zealand:
1) White International Pty Ltd / White International NZ Ltd (White International) warrant that all products
distributed are free from defects in workmanship and materials, for their provided warranty period as
indicated on the top or opposite side of this document. Subject to the conditions of the warranty, White
International will repair any defective products free of charge at the premises of our authorised service
agents throughout Australia and New Zealand if a defect in the product appears during the warranty period.
If you believe that you have purchased a defective product and wish to make a claim under this warranty,
contact us on our Sales Hotline on 1300 783 601, or send your claim to our postal address or fax line below
and we will advise you as to how next to proceed. You will be required to supply a copy of your proof of
purchase to make a claim under this warranty.
2) This warranty excludes transportation costs to and from White International or its appointed service
agents and excludes defects due to non-compliance with installation instructions, neglect or misuse,
inadequate protection against the elements, low voltage or use or operation for purposes other than those
for which they were designed. For further information regarding the suitability of your intended application
contact us on our Sales Hotline on 1300 783 601. If you make an invalid claim under this warranty, the
original product will be sent back to you unrepaired.
3) This warranty refers only to products sold after the 1st January 2012, and is not transferable to another
product type and only applies to the original owner, purchaser or end user, and is in addition to the
consumer guarantees found within the Competition and Consumer Act 2010 (Cth) for goods purchased in
Australia and the Consumer Guarantees Act 1993 (NZ) for goods purchased in New Zealand.
4) Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are
entitled to a replacement or refund for a major failure and for compensation for any other reasonably
foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to
be of acceptable quality and the failure does not amount to a major failure. 2 YEAR WARRANTY.
5) To the fullest extent permitted by law, White International excludes its liability for all other conditions or
warranties which would or might otherwise be implied at law. To the fullest extent permitted by law, White
International’s liability under this warranty and any other conditions, guarantees or warranties at law that
cannot be excluded, including those in the Competition and Consumer Act 2010 (Cth), is expressly limited
to: (a) in the case of products, the replacement of the product or the supply of equivalent product, the
payment of the cost of replacing the product or of acquiring an equivalent product or the repair of the
product or payment of the cost of having the product repaired, is at the discretion of White International or a
3rd party tribunal elected under the Competition and Consumer Act 2010 (Cth) for goods purchased in
Australia and the Consumer Guarantees Act 1993 (NZ) for goods purchased in New Zealand; and
6) To the fullest extent permitted by law, this warranty supersedes all other warranties attached to the
product or its packaging.
7) In the case of services, supplying the services again or the payment of the cost of having the services
supplied again, is at the discretion of White International or a 3rd party tribunal elected under the
Competition and Consumer Act 2010 (Cth) for goods purchased in Australia and the Consumer Guarantees
Act 1993 (NZ) for goods purchased in New Zealand. 8) Our warranty commences from the date of purchase
of the above-mentioned pumps. Proof of purchase is required before consideration under warranty is given.
Record your date of purchase in the space below and retain this copy for your records.
Date of Purchase ..................................................Model Purchased ..............................................

ClayTech PSP530 Installation Manual 7
www.whiteint.com.au
www.whiteint.co.nz
Please always refer to our website for further technical information & new
product innovations
Disclaimer: Every effort has been made to publish the correct information in this
manual.
No responsibility will be taken for errors, omissions or changes in product specifications.
© 2020 Copyright White International Pty Ltd
TM ® - WARNING: Please be aware that various brands & products depicted within this
document are subject to trademark, patent or design registrations. Infringement of any
intellectual property contained within this document without express written authority by
the appropriate intellectual property holder may result in further legal action to be taken.
For any queries regarding use of the contained information please feel free to contact
White International Pty Ltd.