Clear Touch FIXM-V2 User manual

Fixed Mobile (Executive) Stand Installation and Manual
Model:FIXM-V2
For using this product properly and safely, please follow the contents
of the Installation and Operation Manual to install.
Supports 65" Clear Touch panels.
This stand can carry a maximum weight of 132 Ibs.

BOM：
A-The base
B-Underframe
C-Tray
Hardware fittings
Monkey spanner (not included)1pc
D-Fixed parts
Cross recessed pocket hexagon head screw M8x20 8pcs
Cross recessed pocket hexagon head screw M8x40 5pcs
Cross recessed pocket hexagon head screw M8x80 4pcs
M8 Hex nut M8x60 4pcs
M8 Steel washer4pcs
M10 Steel washer8pcs
M10 Spring washer 8pcs
M10 Hex nut M10x6 8pcs

Step 1: The underframe B is fixed with the base A (As shown in figure 1)
(figure 1)

Step 2: Lock the underframe and the base (As shown in figure 2).
( figure 2)

Step 3: Adjust the height of the column according to actual requirement,
then fix parts of machine on the left and right column (As shown in figure 3).
( figure 3)
Available size
55 inch intelligent panel
65 inch intelligent panel
Recommended mounting holes
The specific position can refer installation
height to adjust, according to actual
requirement.
The corresponding hole position of different models.

Step 4: Install wall mount on the column (As shown in figure 4).
( figure 4)

Step 5: Assemble the IFP and brackets with
right screw (As shown in figure 5).
Make sure the brakes are locked. This step requires at least two professional to complete.
( figure 5)
Step 6: Hang the IFP onto the wall mount with the fastened brackets,
and lock the safety screw (As shown in figure 6).
(figure 6)

Step 7: When using a tray, you can remove the locking screw from surface of the aluminum
plastic plate, then install the tray on the underframe, two installation
methods a and b for your reference (As shown in figure 7).
(figure 7)
Installation method a Installation method b

Step 8: After installation, as shown in figure 8.
( figure 8)