Clearance the lighting collection BARHAM 1 Guide

1 Customer Helpline 0345 077 8888
BARHAM 1 LIGHT TABLE LAMP 471077
Installation and User Instructions - Please Keep for Future Reference
Important - Please read these instructions fully before using
If you need help please call our Customer Services on 0345 077 8888
Contents
Section Page
Parts and Component list 2
Safety Information 3
Maintenance 3
Installation 4
PRODUCED FOR HOMEBASE LTD
AVEBURY, MILTON KEYNES, MK9 2NW TEL [phone]
Homebase.co.uk

2 Customer Helpline 0345 077 8888
Parts and Components Listing
A. Pre-wired fitting x 1
B. Metal Shade x 1
C. Shade Ring x 1
D. Base x 1
AB C
D

3 Customer Helpline 0345 077 8888
Safety Information
IMPORTANT – Please read these instructions fully before installation and keep for future reference
For your safety, this product must be installed in accordance
with local building Regulations. If in any doubt, or where
required by law, consult a competent person who is registered
with an electrical self-certification scheme. Further
information is available online or from your local authority
IMPORTANT - This product has been designed for non
professional, domestic use only.
IMPORTANT - Carefully unpack and examine the product for
any damage. If you think there is a defect, do not use the
product and contact our customer services on 0345 077 8888.
IMPORTANT - Dispose of all packaging correctly and
responsibly and in accordance with all local laws and
regulations. Never leave packaging components within reach
of children as they can be a source of danger.
IMPORTANT - Electrical connections must be carried out by a
suitably qualified person and in accordance with all relevant
local building and installation regulations. If in doubt consult a
qualified electrician.
IMPORTANT - Before inserting or replacing bulb(s) ensure the
power is switched off and the bulb(s) have cooled down.
WARNING - Always shut off power to the circuit before starting
installation work.
WARNING - If replacing the fuse in the plug DO NOT
EXCEED the maximum rated amps as specified on the
plug.
WARNING - This is a Class 2 product and Doesn’t require a
earth connection.
WARNING - Do not modify or alter any product before or after
installation. This may render the product un-safe.
WARNING - Accessible parts become hot during use, young
children must be kept away.
WARNING - Do not Place this lamp in a damp
atmosphere.
WARNING - This product is not intended for use by persons
(including children) with reduced physical, sensory and mental
capabilities, or lack of experience and knowledge, unless they
have been given supervision or instruction concerning use of
the product by persons responsible for their safety.
WARNING - Children should be supervised to ensure that they
do not play with the product.
CAUTION - Ensure the power is switched off before cleaning
or carrying out any maintenance.
APPROVED
12/04/2017
ISSUE 1
Q.C
CAUTION! Always disconnect power supply when servicing or cleaning.
Cleaning
- Use a clean dry soft or slightly damp cloth.
- Do not use abrasive cloths or polishes as this may cause damage to the product.
Changing the bulb
IMPORTANT! Ensure that the bulb has cooled down before replacing.
1. Ensure that the power supply has been disconnected.
Maintenance
Additional information
-This product contains natural wood, colour variations on the finish are normal.

4 Customer Helpline 0345 077 8888
Installation
IMPORTANT ! - Ensure the table lamp is NOT
plugged into a mains supply socket before
attempting to assemble the table lamp.
Installation
1. Screw the fitting onto the base.
2. Place the metal shade over the lamp holder.
3. Screw the shade ring provided onto the lamp
holder and secure shade in place.
4. Screw the bulb (NOT SUPPLIED) into lamp
holders, making sure you do not exceed the
maximum wattage and bulb type stated on the
lamp holder.
5. Adjust the fitting to the required position.
6. Insert the plug into a suitable household socket.
7. Using in line on/off foot switch, switch on and test
the fitting.
REPLACEMENT LAMP
Maximum wattage – See Lamp holder
Light bulb shape - See Lamp holder
We recommend suitable low energy lamps only, see
below for example wattages :
5 watt = 25W
7 watt = 35W
9 watt = 45W
11 watt = 60W
15 watt = 75W
20 watt = 100W
Dimming of the luminaire is possible when use
halogen bulbs or dimmable low energy lamps.
3
2
1
4
5
6
7
ON/OFF SWITCH
5