Clearpond Turbo-Vac User manual

T urbo V ac
Underwater Vacuum and Venturi Pump
Head Office: 4 Kingscote Street, Kewdale Western Australia 6105
Australia Freecall: 1800 222 010 New Zealand Freecall: 0508 010 222
Email: [e-mail] Website: www.clearpond.com.au
PERTH • MELBOURNE • BRISBANE • SYDNEY • ADELAIDE • NEW ZEALAND

Turbo-Vac Underwater Vacuum & Venturi Pump Instructions
PACK CONTENTS
1. Turbo-Vac Underwater Vacuum.
2. Venturi Pump Attachment (for emptying).
3. Filter Sock (to collect debris).
4. Filter Sock Retaining Clip.
5. 2.5mtrs of Drainage Hose (for emptying).
6. 1.2m 3 section Telescopic Pole.
7. Leaf Scoop (Supplied in Maintenance Kits Only).
8. Threaded Garden Hose Connection (U.S.A. Only).
or
9. Snap-on Garden Hose Connection.

Snap-fit Connection
Branchement à déclic (pic)
Conector de mola
Schnappverbindung
Connessione a scatto
Conectador a presión (pict)
Threaded Connection
Raccord fileté (pict)
Conector roscado
Gewindeverbindung
Connessione a vite
Conectador para enroscar (pict)
TURBO-VAC ASSEMBLY
1. Select garden hose connector that best suits your garden hose.
2. Snap-fit garden hose connector into the small socket located on the top of the Turbo-Vac body.
3. Attach telescopic pole to the handle socket located on the Turbo-Vac body.
4. For ease of use, place drainage hose in sun until all kinks are out and hose has inflated.
Configuration for emptying
Remove Filter Sock and fit Venturi Attachment
Configuration de vidage (pict)
Enlever le filet et brancher le raccord venturi
Configuração para Esvaziamento
Remover a Meia de Filtro e ajustar o Acessório Venturi
Konfuguration zum Leeren
Den Filterbeutel entfernen und den
Venturi-Zusatzteil einpassen
Configurazione per svuotare
Rimuovere la calza-filtro e collegare
l’attacco venturi
Ruimen configuratie (foto)
Zak wegnemen en verplaats met het verbindingstuck
Configuración del sistema de vaciado (pict)
Quite la bolsa del filtro y ponga el dispositivo de la bomba Venturi
FOR EMPTYING
1. Remove filter sock if fitted.
2. Attach venturi pump attachment.
3. Connect drainage hose to the barb fitting on the venturi pump attacment.
4. Connect garden hose and immerse the Turbo-Vac.
5. Unwind drainage hose and lay end where water is to be discharged.
6. Turn on garden hose to maximum pressure and leave running.
7. For water conservation on Above Ground Pools, spas or Ponds, the hose may be turned off after initial
syphon begins. The performance of the Turbo-Vac is dependent on adequate water pressure being available.
Normal town water pressure is sufficient.

FOR CLEANING
1. Remove venturi pump attachment, if fitted, from the rear of Turbo-Vac body.
2. Fit filter sock to the rear and secure with the retaining clip. The sock will need to be
overlapped to take up the excess diameter.
3. Attach garden hose and immerse the Turbo-Vac.
4. Turn the garden hose on to full pressure.
5. Vacuum floor.
6. Clean out sock after use.
7. For surface cleaning, remove Turbo-Vac from telescopic pole and fit leaf scoop.
Configuration for cleaning
Remove Venturi Attachment and fit filter Sock.
Configuration pour le nettoyage (pict)
Enlever le raccord Venturi et adapter le filet.
Configuração para Limpeza
Remover o Acessório Venturi a ajustar a Meia de Filtro
Konfiguration für das Putzen
Den Venturi-Zusatzteil entfernen
und den Filterbeutel einpassen
Configurazione per pulizia
Rimuovere l’attacco venturi e inserire
la calza-filtro
Configuración del sistema de limpieza (Pict)
Quite el dispositivo acoplador y ponga la bolsa del filtro.
Schoonmaken configuratie (foto)
Het venturi verbindingsstuk wegnemen en vervangen door de zak
Head Office: 4 Kingscote Street, Kewdale Western Australia 6105
Australia Freecall: 1800 222 010 New Zealand Freecall: 0508 010 222
Email: [e-mail] Website: www.clearpond.com.au
PERTH • MELBOURNE • BRISBANE • SYDNEY • ADELAIDE • NEW ZEALAND