CNET CNUM56-RC User manual

Installation Guide of Controllerless USB V.92 Modem
Support O/S
1. Windows 9x
2. Windows ME
3. Windows 2000
4. Windows XP
Outlet Description
LED DESCRIPTION
OH Off Hook Indicator
Lights when the modem picks up or answer the telephone line.
TR Transmit / Receive Indicator
Flashes when transmit or receive data.
1

Hardware Connection
Connection Method
1. Line: Connect to your telephone line by RJ11 cable
2. Phone: Connect to your telephone set by RJ11 cable
3. USB Port: Connect to your PC by USB cable
2

Software Installation
Installation Procedures for Windows 9x
1. Windows will report that it has found a new hardware and will open the
“Add New Hardware Wizard” reporting that is searches for the new drivers
for a “V.92 Modem with USB Interface” device. Click Next.
2. To search for the best drivers for your device, click Next.
3. Insert the driver CD and specify the location: E:\Drivers\Win9x (E is your
CD-ROM drive.) and then click Next.
3

4. Windows will show the message ”Windows driver file search for the device
“Controllerless USB V.92 Modem” and show the location of driver. Click
Next
5. Click Finish to complete the installation procedures.
4

Installation Procedures for Windows ME
1. Connect the USB modem to PC with USB cable. Windows will find new
hardware and ask for driver. Select “Automatic search for a better driver”
and then click Next to begin installation.
2. Select Controllerless USB V.92 Modem whose location is
E:\DRIVERS\WINME (E is your CD-ROM drive.) and then click OK.
3. Windows will find the driver and finish the installation. Click Finish to
complete installation.
5

Installation Procedures for Windows 2000
4. Connect the USB modem to PC with USB cable. When Windows detects
the modem, the wizard will help you to install the new device. Click Next
to begin installation.
5. Select “Search for a suitable driver for my device”. Then click Next.
6. Select “Specify a location” only and then click Next.
6

7. Click Browse and indicate the path: E:\Drivers\Win2K_XP. (E is your
CD-ROM drive.) Then click OK.
8. Wizard will find the correct driver for the new device. Then click Next.
9. Read the Digital Signature and then click Yes.
10. Windows has finished installing the software. Click Finish to complete
installation.
7

Installation Procedures for Windows XP
1. Connect the USB modem to PC with USB cable. When Windows detects
the modem, the wizard will help you to install the new device. Insert the
driver CD into your CD-ROM drive. Select “Install the software
automatically” and then click Next.
2. Click Continue Anyway to continue this installation.
3. Click Finish to complete the installation.
8