MultiModem MT5634ZBA User manual

MultiModem®ZBA
MT5634ZBA-Series
MT5634ZBA–V.90
MT5634ZBA-V–V.90
MT5634ZBA–V.92
MT5634ZBA-V–V.92
Quick Start Guide

MT5634ZBA – Series Quick Start Guide
Quick Start Guide
MT5634ZBA-SeriesGlobalVoice/Data/FaxModem
MT5634ZBA-V.90,MT5634ZBA-V-V.90,MT5634ZBA-V.92,MT5634ZBA-V-V.92
PN 82090164L
Copyright
This publication may not be reproduced, in whole or in part, without prior
expressed written permission from Multi-Tech Systems, Inc. All rights
reserved.
Copyright © 2005-7 Multi-Tech Systems, Inc.
Multi-Tech Systems, Inc. makes no representations or warranties with
respect to the contents hereof and specifically disclaims any implied
warranties of merchantability or fitness for any particular purpose.
Furthermore, Multi-Tech Systems, Inc. reserves the right to revise this
publication and to make changes from time to time in the content hereof
without obligation of Multi-Tech Systems, Inc. to notify any person or
organization of such revisions or changes.
Revision Date Description
A 04/03/02 MT5634ZBA-V-V.92 initial release
B 02/12/03 Added all MT5634ZBA builds
C 12/29/04 Change the word country t o country/region
D 03/18/05 Fix graphics resolution
E 04/17/07 Updated the Technical Support contact list.
Trademarks
MultiModemZBA, Multi-Tech, and the Multi-Tech logo are trademarks of
Multi-Tech Systems, Inc. All other brand and product names mentioned in
this publication are trademarks or registered trademarks of their respective
companies.
Technical Support
Country By Email By Phone
France: [email protected] +(33) 1-64 61 09 81
Europe,Asia,Africa: [email protected] +(44) 118 959 7774
U.S.,Canada, all others: [email protected] [phone] or
[phone]
World Headquarters
Multi-Tech Systems, Inc.
2205 Woodale Drive
Mounds View, Minnesota 55112
Phone: [phone] or [phone]
Fax [phone]
http://www.multitech.com

MT5634ZBA – Series Quick Start Guide
Getting Started
This guide shows you step-by-step how to set up your Multi-
Tech MT5634ZBA–Series modem.
The MT5634ZBA modem is your data/fax modem.
The MT5634ZBA-V adds the voice option to your modem.
For detailed information on how to install, test, and use your
modem, see the User Guide, located on the MT5634ZBA CD
provided with your modem.
Safety Warnings
•Use this product only with UL- and CUL-listed computers (US).
•Never install phone wiring during a lightning storm.
•Never install a phone jack in a wet location unless the jack is
specifically designed for wet locations.
•Never touch uninsulated phone wires or terminals unless the
phone line has been disconnected at the network interface.
•Use caution when installing or modifying phone lines.
•Avoid using a phone during an electrical storm; there is a
risk of electrical shock from lightning.
•Do not use a phone in the vicinity of a gas leak.
•To reduce the risk of fire, use only 26 AWG or larger
telephone line cord.
What Is in Your Modem Package
DD
DD
D An MT5634ZBA-Series modem
DD
DD
D A set of four self-adhesive plastic feet
DD
DD
D This Quick Start Guide
DD
DD
D A CD containing modem drivers, User Guide, AT
Commands and Fax Commands Reference Guides,
PhoneTools software, and Acrobat Reader
DD
DD
D A universal power supply
DD
DD
D A 9-pin to 25-pin serial cable
DD
DD
D An RJ-11 phone cable
DD
DD
D A power cord (country-specific for global modems)
3

MT5634ZBA – Series Quick Start Guide
Modem Installation
Step 1: Attach the Self-Adhesive Feet
The modem comes with a set of self-adhesive plastic feet,
which you can optionally attach to the modem. To install, simply
peel them from their paper strip and press them into the
recesses on the bottom of the modem.
Step 2: Change Internal Jumpers (Leased Line Only)
This step is required only if you intend to use the modem on a
leased line. For leased line instructions, see the User Guide.
Step 3: Connect the Modem to Your System
Turn off your computer. Place the modem in a convenient
location, and then connect it to your computer’s serial port, the
phone line, AC power, and your phone.
PWR RS232 PHONE LINE
Connections - No Voice Connections With Voice
Connect the Modem to Your PC
Plug one end of the RS-232 serial cable into the RS-232
connector on the modem, and plug the other end into a serial
port connector on your computer, such as COM1 or COM2.
4

MT5634ZBA – Series Quick Start Guide
Connect the Modem to the Telephone Line
Plug one end of the phone cable into the modem’s LINE jack
and the other end into a phone wall jack.
Important: The LINE jack is not interchangeable with the
PHONE jack. Do not plug the phone into the LINE jack or the
line cable into the PHONE jack.
Connect the Two-Wire Lease Line (For Leased-Line Only)
For leased line information, see the User Guide.
Connect the Modem to the Phone (Optional)
If you want to connect a phone to the same line as the
modem, plug the phone cable into the modem PHONE jack.
Connect the Microphone (Voice Option Only)
To connect a microphone, see the User Guide.
Connect the Speaker(s) (Voice Option Only)
For speakerphone or voice mail applications, use a 1/8-inch-
plug male-to-male stereo patch cord to connect the SPKR
jack on the side of the modem to the LINE IN jack on your
sound card. If your sound card does not have a LINE IN jack,
use its MIC jack. The stereo male-to-male patch cord can be
purchased at a local PC retail store. If you do not have a
sound card, you can plug an amplified speaker directly into
the SPKR jack.
Connect the Modem to the AC Power Outlet
Make sure the power is switch is OFF (an on-off switch is
located on the side panel). Plug the universal power supply
into the PWR jack on the modem . Plug the other end of the
country-specific power supply cord into the universal power
supply and the other end into the power outlet or power strip.
Caution: Use only the power supply supplied with the modem.
Use of any other power supply voids the warranty and can
damage the modem.
5

MT5634ZBA – Series Quick Start Guide
Power-on Test
When you apply power, the modem performs a diagnostic
self-test. The 56 indicator should light. If this does not
happen, check that the power switch is on, the power supply
is solidly connected, and the AC outlet is live.
Step 4: Install the Modem Driver
If you use Windows 98/ME/2000/NT/XP, you must install the
modem driver, which is installed using the Windows Plug and
Play feature. Follow the four-step procedure below. If you use
another operating system, see the User Guide.
1. Make sure your modem is connected properly, and then
turn on your computer. Windows should detect your new
modem and open the Install New Modem wizard.
2. Insert the MT5634ZBA system CD, and then click OK.
3. Windows installs and configures the modem.
4. Click Finish to exit.
For Windows NT, the Install New Modem wizard presents one
additional prompt before Step 2. At this prompt, select Don’t
detect my modem; I will select it from a list, and then click
Next. A dialog box with a list of manufacturers and a list of modem
models appears. Select your modem.
Step 5: Configure the Modem for Your Country or
Region (Global Modem Only)
Different countries/regions have different requirements for how
modems must function. Therefore, before using your modem,
configure it to match the defaults of the country/region in which
you are using it. You can use one of two configuration methods:
DD
DD
D Using the Global Wizard to Configure Your Modem.
Directions follow on next page.
DD
DD
D Using AT Commands to Configure Your Modem - See the
User Guide.
6

MT5634ZBA – Series Quick Start Guide
Using the Global Wizard to Configure Your Modem
The Global Wizard configuration utility is recommended for
computers running Windows 98/ME/2000/XP/NT 4.0.
1. Insert the MT5634ZBA system CD into the CD-ROM
drive. The Autorun dialog box appears.
2. Click Initial Setup and Country/Region Selection.
3. Choose one:
- Run the Global Wizard from the CD. This will not
load the wizard onto your hard drive during
configuration.
or
- Install Global Wizard on the HD. This will install the
wizard onto your hard drive during configuration.
4. The Global Wizard dialog box appears. Click Next.
5. The Global Wizard searches for your modem and
identifies it. Click Next.
6. Select the country/region in which the modem will be
used, and then click Next.
7. Review your country/region choice. If it is correct, click
Next to configure the modem.
8. When Global Wizard announces that the parameters
have been set, click Finish to exit.
Step 6: Install Data Communications Software
Data communications software is designed to send and receive
messages. Multi-Tech includes PhoneTools communications
software with your modem. However, the modem will work with
most data communications software. To install PhoneTools, insert
the MT5634ZBA CD into the CD-ROM drive; click the
PhoneTools icon. You will be asked to choose your language.
The software automatically loads onto your PC.
7

82090164
Patents
This device is covered by one or more of the following patents: 6,031,867;
6,012,113; 6,009,082; 5,905,794; 5,864,560; 5,815,567; 5,815,503; 5,812,534;
5,809,068; 5,790,532; 5,764,628; 5,764,627; 5,754,589; 5,724,356; 5,673,268;
5,673,257; 5,644,594; 5,628,030; 5,619,508; 5,617,423; 5,600,649; 5,592,586;
5,577,041; 5,574,725; 5,559,793; 5,546,448; 5,546,395; 5,535,204; 5,500,859;
5,471,470; 5,463,616; 5,453,986; 5,452,289; 5,450,425; D353,598; 5,355,365;
5,309,562; 5,301,274. Other patents pending.