Codonics Infinity C User manual

Infinity®C Reference Guide
1
2
!
1
2
!

iii
Table of Contents
Components ........................................................................................................................................... 1
Hardware Setup...................................................................................................................................... 5
SmartDrive Configuration ..................................................................................................................... 12
Startup .................................................................................................................................................. 15
Login ..................................................................................................................................................... 16
System Configuration ........................................................................................................................... 19
DICOM Setup ....................................................................................................................................... 20
Monitoring Status.................................................................................................................................. 24
Troubleshooting.................................................................................................................................... 28
Shutdown.............................................................................................................................................. 29

1
Components
Unpacked Components
1
2
!
1
2
!
1
4
5
6
2
7
8
9
3
1. Main chassis
2. Main chassis key
3. AC power adapter
4. AC power cord
5. Ethernet cable
6. SmartDrive
7. Installation disc
8. User’s Manual disc
9. Documentation

2 Infinity C Reference Guide
Main Chassis Front
1
2
!
5 4
1
2
3
6
1. Power button
2. Mute button
3. Status lights
4. Disc drive
5. Hard drives
6. Front door

3
Main Chassis Rear
DVI
HDMI
1
2
3
1. Power connector
2. Serial Attached SCSI (SAS) port 3. Connector panel

4 Infinity C Reference Guide
DVI
HDMI
8
4
5
6
7
4. Ethernet port 1
5. Ethernet port 2 (not used)
6. VGA port
7. Serial port
8. USB 2.0 ports

5
Hardware Setup
CAUTION: Incorrect installation can result in system damage or loss of data.
Users not trained in computer hardware installation, network setup or DICOM
configuration should seek professional assistance.
Power, Ethernet, and SmartDrive
1. Place the main chassis on a solid level surface.
DVI
HDMI
2
2. Connect the power cord from the AC adapter.

6 Infinity C Reference Guide
3
3. Secure the power cord with the clip.
4
4. Connect the AC power cord to the AC adapter and to a power outlet or
uninterruptible power supply (UPS, optional).

7
DVI
HDMI
5
5. Connect the Ethernet cable to Ethernet port 1 (top RJ-45 port).
DVI
HDMI
6
6. Insert the SmartDrive. Optionally program the SmartDrive; refer to SmartDrive
Configuration on p. 12.

8 Infinity C Reference Guide
UPS (Accessory)
1
1. Insert the battery plug.
DVI
HDMI
2
2. Connect the serial cable to the UPS and to the serial port on the main chassis
rear.

9
3
3. Connect the AC power cord to the UPS.
4
4. Connect the UPS power cord to a power outlet.

10 Infinity C Reference Guide
Monitor, Keyboard, and Mouse (Optional)
DVI
HDMI
1
1. Connect the keyboard and mouse.
DVI
HDMI
2
2. Connect the monitor.
NOTE: It is recommended that the monitor power cord be connected to the same
outlet as the main chassis or UPS power cord.

11
Hard Drive Installation
1
2
!
1 3
2 4
Hard drives are factory installed in the order shown.

12 Infinity C Reference Guide
SmartDrive Configuration
CAUTION: Do not reconfigure or modify the software except as described in
configuration tasks documented in this manual.
1. Remove the SmartDrive from the main chassis.
2. Connect the SmartDrive to a PC.
3. Run Configurator.exe.

13
4. Enter the site name and site contact.
5. Select Dynamic or Static for the IP address Acquisition Type.
6. If Static was selected, enter the system IP address and other network settings.
Make sure no spaces are in the System Name entry.
NOTE: The Gateway IP address cannot be set to 0.0.0.0.
7. A DNS Server entry is required for remote LogMeIn support.
8. Select a locale.
9. Select the Purge Temporary Studies option if you want temporary studies to be
automatically deleted when the system reaches 95% full.
10. If you want to set aside a minimum amount of temporary space, enter an
amount in tenths of a TB in the Minimum Temporary Space field.
11. Select a level of concurrent associations you want the system to try to use if
exporting or SmartRouting studies. Options are Serial (One at a time), Low
(Two to Three), Medium (Four to Five), High (Six to Seven).
12. Enter the e-mail server information for system messages.
13. To manage Feature Keys, click the Advanced tab.

14 Infinity C Reference Guide
14. Click the Feature Keys subtab.
15. To add a feature key, click the Add button.
16. Enter the Feature key.
17. Click the OK button.
NOTE: For information about the SmartRouting features, refer to the Infinity
SmartRouting Reference Guide.
18. Return to the Basic tab.
19. Click the Save button and close the window.
20. Disconnect the SmartDrive from the PC.
21. Insert the SmartDrive in the main chassis.

15
Startup
1
1. If there is a monitor installed, press the monitor power button.
2. If there is a UPS, power on the UPS.
1
2
!
3
3. Press the main chassis power button.
4. Wait five minutes for startup to complete, indicated by six audible beeps.
5. If there is no local monitor, refer to “Login Using Remote Desktop” on p. 16.
If there is a local monitor installed, refer to “Login Using Local Monitor” on
p. 18.

16 Infinity C Reference Guide
Login
Login Using Remote Desktop
1. From a PC on the network or a PC connected to the system using an Ethernet
crossover cable, start the Windows Remote Desktop Connection application.
NOTE: If the PC does not have the Remote Desktop Connection application,
download the application from the Microsoft Windows website.
2. Click the Options button.
3. On the Experience tab, change the connection speed to LAN (10Mbps or
higher).