
COLORATO recommends safety first
We at COLORATO are very safety conscious. We design and manufacture consumer
products with the safety of you, our valued customer foremost in mind. In addition, we
ask that you exercise a degree of care when using any electrical appliance and
adhere to the following precautions:
Important safeguards for your Drink mixer
Carefully read all instructions before
operation and save for future reference.
Remove any packaging material and
promotional stickers before using the Drink
mixer for the first time.
Do not place the Drink mixer near the
edge of a bench or table during operation.
Ensure that surface is level, clean and free
of water, flour etc. Vibration during
operation may cause the appliance to
move.
Do not place this appliance on or near a
hot gas or electric burner, or where it could
touch a heated oven.
Always ensure the Drink mixer is properly
assembled before use.
Do not leave the Drink mixer unattended
when in use.
Ensure that the switch in the control panel
is in OFF position and then unplug from
the power outlet before attaching the drink
mixer or attempting to move the appliance,
or when it is not in use and before cleaning
and storing.
Never place your fingers or utensils inside
the Drink mixer cup without unplugging the
unit from the power outlet.
Keep hands and utensils out of the
container while the motor is running, to
prevent the possibility of severe personal
injury and/ or damage to the drink mixer. A
rubber scrapper may be used, only when
the machine is not running.
Do not remove Drink mixer’s cup from its
position whilst in operation. Remove the
cup only when the appliance is completely
off.
To protect against electric shock do not
immerse the base, the motor, the plug or
the cord in water or any other liquid.
Do not use the Drink mixer for anything
other than mixing liquids.
Make sure the motor and rod have
completely stopped, the POWER switch is
in OFF position and it is unplugged from
the power outlet before disassembling.
Keep the appliance clean.