Combi Washable Hair Clipper User manual

Thank you for choosing Combi Washable Hair Clipper. This is a general family use
product. Please read this manual carefully and use the product accordingly.
Usage: Above 6 Months
WARNING:
-Always use under adult supervision.
-Do not use the product in ways or for purposes other than mention on the
packaging. Improper usage may cause danger to child.
-Do not use the device if the cutting unit or the trimming comb is damaged
or broken, as this may cause injury.
-Never immerse the device in water or rinse it under the tap. Only the blade
unit can be rinsed under the tap.
-Use and store the device at a temperature between 5°C and 35°C.
-Clean the blade every time after use.
-Do not mix old and new batteries of different types.
-Do not mix alkaline, standard (carbon-zinc), or rechargeable (nickel –cadmium)
batteries.
-Remove batteries if not in use for long period. Always remove exhausted
batteries from the product. Dispose of batteries safely.
Description:
1. Hair Clipper x 1
2. Bottle of lubricating oil x 1
3. Cleaning Brush x 1
4. AAA Battery x 2
Hair Clipper
Cleaning Brush
Cleaning Brush
Lubricating oil
Cleaning Brush
AAA Battery
Cleaning Brush

Instruction for Hair Cutting:
Before starting the cut
Inspect the clipper, make sure that is free of oil between the cutting blade teeth
and turn the unit on to distribute the oil and to make sure it is running
smoothly .Wipe off any excess oil.
5 Different Level attach comb:
Comb
Position
Length
1.
3 mm
2.
6 mm
3.
9 mm
4.
12 mm
5.
15 mm
How to use:
1. Attach the comb onto the device.
2. Turn the length setting adjuster to the desired length setting.
Note: When you trim for the first time, start at the highest length setting to
familiarize yourself with the device.
3. Switch on the device.
4. To trim most effectively, move the trimmer against the hair growth direction.
Make sure the surface of the comb always stays in contact with the skin.

After use:
Always clean out hair and lubricate the cutter after use.
1. Always turn switch to “OFF” before servicing the unit.
2. Use accessory cleaning brush to clean out hair from the unit and around cutter.
Open the blade from the clipper and clean out hair from the inside.
3. Lubricate the cutter with a few drops of oil. (Store the clipper in a dry place.)
Washable Cleaning:
1. The blades will slide out and the blade set can easily be cleaned under the tap.
2. Once the blades are cleaned the blades are locked into place by pushing the blade
set towards the hair clipper head and will snap into place.
3. Do not run the entire unit under the tap, only the blade set is meant to be
submerged in water.

Safety precautions:
1. Never use cream or gel shaving agents. Cause of blade clogging or damage.
2. When the appliance has stopped moving, do not leave it with the switch turned
on.
3. Never place or dry in places exposed to direct sunlight or high temperatures.
Cause of damage.
4. Never wipe the device with alcohol, benzene, or thinner. Cause of damage.
5. Keep the hair clipper away from children to avoid suffocation.