Comet Labs WRB64 User manual

__________________________________________________________
MIMO Wireless router
4-port 10/100 Mbps Switch
and VPN server built-in
User guide
(Model-nr WRB64 & WRB64MIMO)
Version 1.01 – Aug. 2006
English

__________________________________________________________
Thank you very much for your purchasing of our Wireless. It
supports IEEE802.11G Standard, transferring date with speed of
54 Mbps, also conforms to IEEE802.11B Standard. Our wireless
router and MIMO Wireless router satisfy enterprise with small
scale, SOHO user to lay outWAN andLAN. WRB64and
WRB64MIMO provide multi-protection for the security for the
networks, such as support or prohibit SSID broadcast, not
allowing AP to broadcast SSID network name for SSID
prevention. WRB64 and WRB64MIMO support WEP for the
security of WLANS with powerful firewall. WRB64 and
WRB64MIMO allow many PCs to share one PC’s WAN Cable and
one Internet account by ISP. WRB64 and WRB64MIMO allow
various ways to internet, such as ADSL, Cable Modem, dial up
automatically, easy to configure. WRB64 and WRB64MIMO
combine 4 ports Ethernet Switch to connect with Ethernet
adapters. VLAN server allow Internet user to visit website, FTP
and other service in LAN. WRB64 and WRB64MIMO control the
outside visit, configure different authorized access. WRB64 and
WRB64MIMO support Web management, DMZ, network game and
videoconference.
This manual is the user’s guide for WRB64 and WRB64MIMO.
This manual consists of hardware specification, installation
guide, configuration guide and definition on how to use WRB64
and WRB64MIMO.
Pls use this manual for your reference.
For installation, please refer to chapter 4. For the Internet
connection, please refer to chapter 6.

__________________________________________________________
TABLE OF CONTENTS
1. WARNING ..........................................................................................5
2. PACKAGE CONTENTS........................................................................6
3. SPECIFICATIONS ................................................................................7
4. INSTALLATION ................................................................................. 11
4.1 Before installation ................................................................... 11
4.2 Installation ...................................................................................11
4.3 NETWORK MAP..........................................................................13
5. TCP/IP Networking parameters ................................................... 14
5.1 Windows 2000 SETUP ..............................................................14
5.2 Windows XP SETUP .................................................................19
6. Router homepage connection ......................................................24
6.1 – Internet connection wizard ................................................. 28
6.2 – Wireless wizard......................................................................29
6.3 manual configuration of the Internet connection..............30
6.3.1 – Authentication PPPoE (ADSL)....................................... 30
6.3.2 WAN Dynamic IP address................................................. 35
6.3.3 Static IP address ............................................................... 38
6.3.4 Wireless WAN Client ................................................... 40
6.4 Wireless Status ....................................................................... 41
6.5 LAN Status ................................................................................. 43
7. BASIC SETUP....................................................................................44
7.1 WAN SETUP................................................................................44
7.2 Wireless Setup ..........................................................................45
7.2.1 Basic configuration........................................................... 46
7.2.2 Advanced Configuration ..................................................47
7.3 LAN configuration – LAN DHCP SETUP ..................................51
7.4 Ethernet - Link Setup/Info ..................................................... 55
7.5 static routing - Routing Table................................................57
8 – SYSTEM setup................................................................................. 58
8.1 Administration and right access – Admin Setup..................58

__________________________________________________________
8.2 Firmware Upgrade ................................................................... 61
8.3 System log ................................................................................. 64
8.4 Other functions - Miscellaneous............................................ 66
9 Quality of service - QoS................................................................. 71
9.1 Basic Setup ................................................................................71
9.2 IP QoS ......................................................................................... 73
9.3 Application QoS ........................................................................75
9.4 Port QoS..................................................................................... 77
10 - Network addresses translation - NAT......................................79
10.1 Applications ............................................................................79
10.2 - Internal Server..................................................................... 82
10.3 Port Forwarding ..................................................................84
10.4 Port Triggering ....................................................................86
10.5 Address translation - NAT ON/OFF ..................................... 88
11 Advanced Setup ............................................................................. 89
11.1 Firewall....................................................................................89
11.2 Dynamic DNS - DDNS..............................................................92
11.3 – WOL (Wake on LAN) ............................................................94
11.4 - URL Filtering ........................................................................96
11.5 Remote Management............................................................. 98
11.6 - Scheduler ............................................................................ 100
11.7 - VPN Setup ........................................................................... 102
Appendix A Ethernet cabling ........................................................104

__________________________________________________________
1. WARNING
1. Pls used adaptor provided by manufacturer, otherwise
will break the Wireless router.
2. Do not drop the router down or any damage to
the Router and its electronic component.
3. Do not disassemble IP Router, otherwise warranty for
repair will not be guaranteed
4. Do not exposure IP Router under Sunshine, to avoid
heat.
5. Pls keep IP Router dry and away from fire.
6. Pls keep IP Router under shield and run under 0-40 to
the perfect state.

__________________________________________________________
2. PACKAGE CONTENTS
The package content of the router is:
1. A wireless router or MIMO Wireless router
Model-nr WRB64 or WRB64MIMO
2. DC Power adapter (7.5V, 1.5A)
3. Ethernet Cable
4. CD-ROM containing this manual

__________________________________________________________
3. SPECIFICATIONS
This Wireless IP Router is a highly integrated Wireless IP
Router with many functions such as Gateway, Switch, DHCP
server, Firewall etc:
11G 54Mbps ：Support 802.11g and 802.11b ，high-speed
data rate up to 54Mbps for 802.11g (draft) and 11Mbps for
802.11b with wide range coverage.
MIMO: Support 802.11g and 802.11b，Integration of Multiple
input, Multiple Output technology for better performance.
Networ k Address Trans form (NAT) ：With providing Internet
application this IP Router can allow more than one user to
connect with Internet at the same time by sharing one public
IP address; it supports many connection ways：xDSL、Cable
Modem、LAN/ Leased Line and so on.
4 Ports 10/100M Switch：It has 4 Network 10/100M switch
ports，port support MDI/MDIX automatic identification
function, Switch port can connect to other switches, so
that can support over hundred computers to go to Internet at
the same time.
PPPoE (ADSL) Automatic Disconnection/Connection ：
Users can optionally choose automatic disconnection in idle
time and connection in access time to save Internet access
cost.
DHCP Server Supported：All of the networked computers
can retrieve TCP/IP settings automatically from this product.
Static IP address Binding: Authorize user to manage and
configure PC in LAN in most by binding MAC address and IP
address together.

__________________________________________________________
System Memorandum: WRB64 and WRB64MIMO record
routing history and forwarder to administrator mailbox.
UPnP: Defaulted UPnP enable user to configure networking
hardware and software. Management Based on Web Page
：Both network configuration and system configuration
are based on inside Web Server. The user interface is clear
and usage is easy. By this interface users can also update
software to enhance the system stability and expansibility.
Internet Access Control：Different administration can be setup
for different users. Data Package Filtration: Port Filtration, IP
Address Filtration, MAC Address filtration, Key word Filtration
enable user to configure IP router to analyze data package can
be forwarded or refused.
Virtual Server：Allow other users from Internet access
WWW, FTP server or other servers in LAN.
QoS: Control the IP Router bandwidth forwarding and
transferring by configuration IP Address QoS, application QoS
and port QoS.
Firewall：Users can randomly refuse or allow data from
Internet
Scheduler: Manage and control Local Network accessing
Internet by configuration time.
DMZ Server：Allow one computer to be totally opened to
Internet to make sure special application can run.
Remote Management：Users can totally manage office or
home network wherever they are.
DDNS：By this function users can set up their own web station.

__________________________________________________________
Remote Wake-up: Enable user to remote wake up PCs in LAN.
Support VPN Pass-through：Supports VPN Pass-through PPTP
dialogue，and also supports users to configure VPN Server and
Client in LAN.。
VPN server: Allow you to setup VPN server, allow 5 VPN client
logging at same time

__________________________________________________________
Detailed Specifications
WIRELESS IP ROUTER
Standard IEEE802.11g, IEEE802.11b, IEEE802.3
IEEE802.3u
Protocol TCP/IP, NAT, DHCP, UDP, FTP, PPPoE
PPTP, http, DNS, IPSec/VPN Pass-through
External ports WAN: One 10/100 Mbps RJ-45 port
LAN: Four 10/100 Mbps switched ports
Frequency 2.412 – 2.472 GHz
Communication 54 Mbps, 48, 36, 24, 18, 12, 9, 6,
11 Mbps 5.5, 2, 1
Channels 14 (Europe: from 1 to 13)
Modulation CCK, DQPSK, DBPSK, OFDM
RF Power 16-18 dBm
Antenna 1* 2.4 GHz Dipole Antenna (WRB64)
3 * 2.4 GHz Dipole Antenna (WRB64MIMO)
Cable UTP 100Base-TX: UTP/STP 5 or above std.
Interface Web UI
CPU/RAM KENDIN KS8695PX (ARM9)
2 MB FLASH – 16 MB SDRAM
OS Windows 95/98SE/ME/NT/2000/XP
MacOS – Linux or other UNIX system

__________________________________________________________
4. INSTALLATION
4.1 Before installation：
4.1.1. Firstly please confirm your computer OS (Windows
95, 98, NT, ME, 2000, XP, Linux, Mac) and Web
browser (Internet Explorer 4.0 with JavaScript
function、Netscape Navigator 4.0 or above version).
4.1.2. Make sure there is LAN Card which has been
correctly installed in your computer.
4.1.3. If you are xDSL user, please remember your user ID
and password.
4.1.4. If you connect Internet by LAN or WAN, please
get the following information from your network
administrator: IP address is static or dynamic, DNS,
default gateway, account and so on.
＊If your computer has installed ADSL PPPoE dial-
up software before the installation of IP Router,
please backup your installation software and uninstall
your ADSL PPPoE dial-up software by Start->control
panel->Add or Remove Programs.
4.2 Installation
4.2.1. Setup WAN connection: connect broadband cable
(xDSL, Cable Modem or LAN/ Leased cable) with WAN
port of IP Router.
4.2.2. Setup LAN connection: connect your computer LAN
card’s port or your switch UPLINK port with one
LAN port of IP Router by a common network
cable.

__________________________________________________________
Note: All LAN ports of IP Router can automatically sense
cross cable, so you can either use through cable or
cross cable to connect LAN card or switch.
4.2.3. Turn on the power: connect and the power supply,
turn on it. Then IP Router comes to self-detect
state. During the self-detect: PWR LED will be long
light, RUN LED will slow flash after correct startup,
other four LAN LED and WAN LED will flash only twice
rapidly, then the system will come to normal work
state.
4.2.4. Start computer

__________________________________________________________
4.3 NETWORK MAP
Note：During the usage, the sequence of turn on is：firstly
turn on Modem’s power supply，1 minute after Modem
startup turn on IP Router power supply, then turn on the
computer.

__________________________________________________________
5. TCP/IP Networking parameters
Users should configure local network to access
Internet by IP Router. Users should know the default
configuration of IP Router before installation. Users must
connect with IP Router again after configure
computer’s local network. Please make sure your
computer setting is as follows, Otherwise IP Router can
not be correctly connected (Linux and Mac users please
setup as follows by relative conference).
The default configuration of IP Router is:
— IP address：192.168.0.1
— Subnet Masks：255.255.255.0
Users can setup static or dynamic IP configuration.
5.1 Windows 2000 SETUP
(1) Install IP Router.
(2) Start Windows 2000 and check LAN LED is on or off. If
off, please confirm the connection of your computer
with IP Router.
(3) Click “start”->“Setting”->“Panel Control”

__________________________________________________________
(4) Double click the “Network and Dial-up Connection” in
“control panel”.
(5) Click “Local area connection”->“Properties”
->“Internet protocol （TCP/IP）”and “Properties”.

__________________________________________________________
(6) Click “General” bar, Select “Obtain an IP address
automatically” and “Obtain DNS server address automatically”

__________________________________________________________
(7) Click “OK”.
(8) Click ”Start” ->“Run”.
(9) Input ”cmd”, then click “OK”.
(10) Input “ipconfig” in Pop-up Command window.
Please make sure your IP is thesamewith below. If
same then your configurations is s uc c ess ful , or
p l ea s e red o the above steps and restart your
computer.
■ The IP address is between 192.168.0.2 and 192.168.0.254
■ the subnet mask is 255.255.255.0
■ the default gateway is 192.168.0.1

__________________________________________________________
(11) Input “ping 192.168.0.1”, then “Enter”.
(12) If you can see “Reply from 192.168.0.1: bytes=32
time=2ms TTL=64”，then the connection between your
computer and IP Router is completed.

__________________________________________________________
5.2 Windows XP SETUP
(1) Install IP Router.
(2) Start Windows XP and check LAN LED is on or off. If
off, please confirm the connection of your computer
with IP Router.
(3) Click “Start”->“Setting”->“Panel Control”
(4) Double click the “Network and Internet
Connections” in “control panel”.
(5) Click “Network connection”->“local area
connection”->“properties”-> “Internet
protocol（TCP/IP）”and “Properties”.
(6) Click “General “, Select “Obtain an IP address
automatically” and “Obtain DNS server address
automatically”
(7) Click “OK”

__________________________________________________________