Welcome to Grando RM!
Installation
Attach rack mount handles kit, rails or legs. Place the device in a 4U rack space
or on a horizontal surface (vertically or horizontally).
Starting Up
Connect all AC power cables to each of the power supply units of GRANDO RM.
After connecting the power supplies to the AC mains, the controller
will automatically turn on, followed by liquid cooling system self-diagnosis.
Turning ON
To turn ON the liquid cooling system PRESS and HOLD BOTH buttons.
Shutting DOWN
To shut down the device PRESS and HOLD BOTH buttons.
Press NEXT>> (PB2) button to submit shut down.
Control buttons usage
An important note
Please read this document and safety information in the RM user guide carefully
before you first use Grando RM.
Pres
s
the
left/bottom
button
PB1
(<<PREV)
for
les
s
than
2
sec,
to go to the “PREVIOUS” command
Press the right/top button PB2 (NEXT>>) for less than 2 sec,
to go to the “NEXT” command
Pres
s
and
hold
the
left/bottom
button
PB1
(<<PREV)
for
mor
e
than
2
sec,
to “CANCEL” the command
Press and hold the right/top button PB2 (NEXT>>) for more than 2 sec,
to “SUBMIT” the command
PRESS <<PREV NEXT>>
HOLD CANCEL SUBMIT
•
•
•
•
12
Short model
Long model
Rubber legs AC power sockets
19”
guide
rails
Long/short model
Power Button 1 Power Button 2 HandlesI/O ports
Reservoir
Display
