commercial cool CCDC02 User manual

1. READ these instructions carefully before installing and operating the wa-
ter dispenser. Keep them for further reference.
2. Record in the space below the “SERIAL NO.” found on the nameplate on
your water dispenser and retain this information for future reference.
SERIAL NO.:
Please save sales receipt for warranty.
User Manual
Direct Connect
Water Dispenser
With R.O. System
MODEL: CCDC02

Page 2
Staple your receipt to your manual.
You will need it to obtain warranty service.
Thank you for purchasing our
W Appliance product. This easy-
to-use manual will guide you in
getting the best use of your water
dispenser.
Remember to record the model and
serial numbers. They are on a label
on the back of the product.
_____________________________
Model number
_____________________________
Serial number
_____________________________
Date of purchase
CONTENTS
PRODUCT REGISTRATION
SAFETY INFORMATION
Important Safety Instructions..........................................................................................................................................3-4
Grounding Instructions......................................................................................................................................................... 5
SET UP & USE
Installation Guide .....................................................................................................................................................................6
Parts & Features ....................................................................................................................................................................... 7
Before Using Your Water Dispenser............................................................................................................................ 8
Installation.............................................................................................................................................................................. 9-13
Operating Instructions.................................................................................................................................................. 14-16
Cleaning and Maintenance..........................................................................................................................................17-18
TROUBLE SHOOTING & WARRANTY
Before You Call For Service ................................................................................................................................................19
Customer Service .....................................................................................................................................................................19
Troubleshooting...................................................................................................................................................................... 20
Limited Warranty......................................................................................................................................................................21

Page 3
IMPORTANT SAFETY INSTRUCTIONS
1. Use this appliance only for its intended purpose as described in this
instruction manual.
2. This Water Dispenser must be properly installed in accordance with the
installation instructions before it is used. See grounding instructions in
the installation section.
3. You should use the ON/OFF switch to turn the machine ON or OFF. Do
not turn the machine ON or OFF by plugging or unplugging the power
cord.
4. Never unplug your Water Dispenser by pulling on the power cord.
Always grasp the plug rmly and pull straight out from the outlet.
5. Repair or replace immediately, all electric service cords that have
become frayed or otherwise damaged. Do not use a cord that shows
cracks or abrasion damage along its length, the plug or the connector
end.
6. Switch OFF and unplug your Water Dispenser before cleaning or
changing the lters.
7. The water dispenser should be placed rmly on a at level surface to
avoid tipping.
8. Close supervision is necessary when any appliance is used by or near
children. Not recommended for use by children.
9. The water dispenser, dispenses hot water which can cause severe burns
or scalding.
10. Avoid exposure to direct sunlight and always keep it at least 4 inches
away from walls. Do not place near heat sources such as stoves,
radiators, etc.
NOTE: If the water dispenser has been placed in a horizontal or tilted
position for any period of time, wait 12 hours before plugging the
unit in.
This water dispenser should be installed by a licensed plumber.
R.O. water coolers require a drain line to discharge waste water.
SAFETY INFORMATION
DANGER
DANGER - Immediate hazards
which WILL result in severe
personal injury or death
WARNING
WARNING - Hazards or unsafe
practices which COULD result in
severe personal injury or death
CAUTION
CAUTION - Hazards or unsafe
practices which COULD result in
minor personal injury
WARNING
When using electrical appliances, basic safety precautions should always be
followed to reduce the risk of re, electric shock and personal injury :
READ ALL INSTRUCTIONS BEFORE USING THE PRODUCT

Page 4
11. The water dispenser should not be recessed or built-in to an enclosed
cabinet. It is designed for freestanding installation only.
12. Do not operate in the presence of explosive fumes.
13. All repair or maintenance should be done by a qualied professional.
14. The 1/4” plastic tube must be connected to the drain outlet or the waste
water extracted from the RO lter will spill onto the oor. This could
cause damage to the oor.
15. Do not immerse the appliance or the power cord in water or other
liquids.
16. Do not use any detergents, glass or household cleaner, furniture polish,
gasoline, paint thinner or other solvent to clean any part of the water
dispenser.
17. Do not let cord touch any hot surface and make sure that it does not
hang over a table edge or counter.
18. After the water dispenser is turned OFF, wait at least 3 minutes before
turning the unit on again.
19. Do not use outdoors
SAFETY INFORMATION
SAVE THESE INSTRUCTIONS
HOUSEHOLD USE ONLY
20. WARNING: BURN HAZARD: The product heats water tio a
temperature of approximately 95˚C/203˚F. Water temperatures
above 52˚C/125˚F can cause severe burns or death from scalding.
Children should be supervised by an adult when using this product.
21. WARNING: FIRE HAZARD: Do not store or use gasoline or other
ammable vapors and liquids in the vicinity of this or any other
appliance. Do not operate the dispenser with a damaged cord. Do
not use with an under rated extension cord or an extension cord
without a ground.
22. Never turn the product upside down or tilt more than 45 degrees.
If the unit has been resting on its side or upside down for a long
period of time, the unit must be put in the upright position for
approximately 12 hours before turning it on.
23. Never use this dispenser with water that is unsafe to drink or is from
an unknown source.
24. Never use any other liquids in this dispenser other than tap water.
25. Install this water dispenser in a dry place away from direct sunlight.
For indoor use only.
WARNING: The water supply to this water dispenser must be from a
cold water supply. Do not connect to a hot water supply.

Page 5
GROUNDING INSTRUCTIONS
ELECTRICAL REQUIREMENTS
The electrical requirements are a 115 volt 60 Hz, AC only, 15 amp. It is recommended
that a separate circuit serving only the product be provided. The product is equipped
with a 3-wire cord having a 3-prong grounding plug. It must be plugged into a wall
receptacle that is properly installed and grounded.
This appliance must be grounded. In the event of an electrical short circuit, grounding
reduces risk of electric shock by providing an escape wire for the electric current.
The cord provided with this appliance is equipped with a grounding wire and a
grounding plug. The plug must be plugged into an outlet that is properly installed
and grounded.
Avoid the use of three prong adapters or cutting off the third grounding prong in
order to accommodate a two prong outlet. This is a dangerous practice since it
provides no effective grounding for the water dispenser and may result in shock
hazard.
Consult a qualied electrician or serviceman if:
1) The grounding instructions are not completely understood.
2) You are unsure that the appliance is properly grounded.
3) You have any questions about the grounding or electrical instructions.
POWER SUPPLY CORD
1. Avoid the use of an extension cord because of potential safety hazards under
certain conditions. Have a qualied electrician or serviceman to install an outlet
near the appliance.
2. If it is absolutely necessary to use longer cord sets or an extension cord, extreme
care must be exercised.
a) Use only a grounding type 3-wire extension cord that has a 3-blade grounding
plug and a 3-slot receptacle that will accept the plug on the appliance.
b) The marked electrical rating of the cord set or extension cord must equal to
or greater than the electrical rating of the appliance. The longer cord should be
arranged so that it will not drape over the counter top or table top where it can
be pulled on by children or tripped over unintentionally.
NOTE: Neither W Appliance nor the dealer can accept any liability for damage to the product or
personal injury resulting from failure to observe the electrical connection procedures.
SAFETY INFORMATION
WARNING
Improper use of the grounding plug can result
in a risk of electric shock.
WARNING - RISK OF FIRE
It is important the plug ts tightly into the wall outlet.
If the plug does not t securely and appears loose, it should not be used.
Have a licensed electrician replace the receptacle.

Page 6
INSTALLATION GUIDE
1. Unpack your water dispenser by removing all packaging materials like
carton, base, foams, adhesive tape, etc.
2. Remove all accessories, internal packaging material used to hold shelves,
ice tray, etc. in place.
3. Clean the remains of all adhesive tap used and remove all printed
material supplied.
4. Install the water dispenser in a convenient location away from extreme
heat and cold. Allow sufcient clearance between the water dispenser
and side wall so the door(s) will open without obstruction. Water
dispenser is not designed for recessed installation.
5. The oor on which the water dispenser should be placed must be at,
hard, solid, and even. The water dispenser should not be placed on any
soft material such as foam, plastic, etc.
6. It is recommended that there be 4” minimum clearances around
the back of the water dispenser for proper air circulation. Proper air
circulation will help your water dispenser work at maximum efciency.
7. R.O. water coolers require a drain line to discharge waste water. A
licensed plumber should determine a location accessible to both a
cold water connection and drain line. The 1/4” plastic tube must be
connected to the drain outlet or the waste water extracted from the RO
lter will spill onto the oor.
NOTE: The appliance must be correctly connected to the power supply.
SET UP & USE

Page 7
PARTS & FEATURES
SET UP & USE
Filter Reset
Adapter
with Valve (metal)
Filter Flushing
Adapter
Button for Hot Water
Open Door
Inset
Child Lock
Hot Indicator
Light
Filter Indicator
Light
Button for
Cold Water
3 Way Adapter
(plastic) (4) Filters
Heating Switch
Filter Reset
button
Power
Cord
Drain Outlet
with
Drain Cover
Water Inlet
Water
Outlet
Cold
Indicator
Light
Water
Spout
Removeble
Drip Tray
Door
Cooling Switch
1/4” Plastic Tube
137” Long
Note: Depending on
the type of plumbing
and type of pipes,
some installation
parts required may
not be included with
the water dispenser. Drain Saddle
Filter Reset

Page 8
SET UP & USE
PROTECTION FROM HEAT AND MOISTURE
• Do not install your water dispenser in any location where heavy
moisture is present or if the location is not properly insulated. This water
dispenser is not designed to operate in temperature setting below 50˚
Fahrenheit or above 100˚ Fahrenheit.
• Location for the water dispenser should be on a hard surface and away
from direct sunlight and heat source, e.g., radiators, baseboard heaters,
cooking appliances, etc.
BEFORE USING YOUR WATER DISPENSER
• Do not connect the power cord or switch ON the unit before all
installation steps are completed.
• Make sure the unit has been in an upright position for at least 12 hours.
• Remove any packaging material, tape etc. including any thin plastic lm
covering. The drip tray should be positioned properly in place.
• Clean the interior and exterior of the unit. (SEE CLEANING AND
MAINTENANCE)
• Connect the water dispenser to a cold water supply. (SEE
INSTALLATION)
• Connect the R.O. system to a drain (SEE INSTALLATION)
• Prime and install the lters. Press the Filter Reset Button. (SEE FILTER
INSTALLATION)
• After installation steps are complete, plug cord into a properly grounded
wall outlet. The power light will illuminate. At this time, the water will be
pumped into the hot and cold tanks. This may take a few minutes.
• Turn both the heating and cooling switches to the ON (I) position. The
hot and cold water indicator lights will illuminate. The indicator lights will
shut off when each cycle is complete.
NOTE: The water dispenser will not start dispensing hot or cold water until
the internal water tanks are lled.
Cooling switch
Heating switch
Filter Reset button

Page 9
SET UP & USE
NOTE: Depending on the type of plumbing and type of pipes, some installation parts
required may not be included with the water dispenser.
• Follow the steps to connect the water dispenser to a cold water supply or split an
existing connection, such as one to a refrigerator ice maker.
• Make sure the unit is unplugged before connecting to the water supply.
INSTALLATION TO A COLD WATER SUPPLY
THIS TYPE OF CONNECTION CAN BE USED UNDER A SINK
• Use the Metal Adapter with Valve that is included with the water dispenser for
this type of installation.
1. Turn off the cold water supply.
2. Disconnect the current cold water supply line.
3. Connect the Metal Adapter with Valve, between the cold water supply line and
cold water valve as shown.

Page 10
SET UP & USE
4. Remove the nut from the Metal Adapter with Valve and insert the 1/4” plastic tube
through the nut. Insert the tube onto the protruding part of the Adapter where
the nut was located until it reaches the threading.
Note: Tube can be cut according to the appropriate length needed. End of tube
should be cut straight for proper tting.
5. Screw the nut tightly into place to keep the plastic tube securely connected
to the Metal Adapter with Valve. Make sure the Valve is in the off position
(perpendicular to the tube).
6. Connect the end of the 1/4” plastic tube to the water inlet located on the back of
the unit. Insert the open end of the plastic tube into the water inlet. Make sure the
plastic tube is tight and secure.
water outlet water inlet

Page 11
INSTALLATION TO A COLD WATER SUPPLY BY SPLITTING
AN EXISTING CONNECTION
This type of connection can be used to split an existing connection such as one
established from a water source to a refrigerator ice maker.
• Use the Three Way Plastic Adapter that is included with the water dispenser for
this type of installation.
1. Turn off the cold water supply that is the source of water to your refrigerator line.
2. Cut the 1/4” plastic tube that is currently connected to your refrigerator or
icemaker.
3. Insert each cut end of the existing 1/4” plastic tube into one of the holes of the
Three Way Plastic Adapter as shown.
4. Insert one end of the 1/4” plastic tube that is supplied with the water cooler into
the third opening of the Three Way Plastic Adapter.
Note: Tube can be cut according to the appropriate length needed. End of tube
should be cut straight for proper tting.
SET UP & USE
(Water Dispenser)
(Refrigerator water line) (Water source)

Page 12
SET UP & USE
5. Connect the end of the 1/4” plastic tube to the water inlet located on the back of
the unit. Insert the open end of the plastic tube into the water inlet. Make sure the
plastic tube is tight and secure.
CONNECTING THE R.O. SYSTEM TO A DRAIN
WARNING: The 1/4” plastic tube must be connected to the drain outlet or the
waste water extracted from the RO filter will spill onto the floor.
• R.O. water coolers require a drain line to discharge the waste water. A licensed
plumber should determine the best draining method for the location of the water
dispenser however the unit comes with a drain saddle that ts a 1.5” pipe.
1. Determine the location to install the drain saddle. Mark the drain pipe to indicate
where to drill for the opening.
2. Drill a 1/4” hole at the marked location, making sure you only drill through one
side of the drain pipe.
3. Locate the half of the drain saddle with the hole in the center. Remove the
backing from the foam gasket. Align the gasket with the hole on the drain saddle,
and stick the adhesive side of the gasket to the drain saddle.
4. Position both halves of the drain saddle on the drain pipe with the saddle’s
opening aligned over the drilled hole. Make sure both halves of the drain saddle
are aligned.
5. Connect both sides of the drain saddle by inserting the bolts though the holes of
each saddle as shown, and secure with the nuts. Do not over-tighten.
6. Connect the 1/4” plastic tube from the water outlet
on the back of the unit to the to the drain saddle.
water outlet water inlet
Connect the 1/4”
plastic tube

Page 13
Follow the Instructions to prime and install the lters (SEE FILTER INSTALLATION)
• After all the installation steps are complete. turn ON the valves to the water
source and plug cord into a properly grounded wall outlet. The power light will
illuminate. At this time, the water will be pumped into the hot and cold tanks.
• Turn both the heating and cooling switches to the ON (I) position. The hot and
cold water indicator lights will illuminate. The indicator lights will shut off when
each cycle is complete.
NOTE: The water dispenser will not start dispensing hot or cold water until the
internal water tanks are lled.
DRIP TRAY
• Install the drip tray before operating the water dispenser. Insert it so it snaps into
place.
• The drip tray can be removed to empty water that collects into the tray. Gently
pull it out and clean it before reinstalling.
SET UP & USE

Page 14
SET UP & USE
OPERATING INSTRUCTIONS
DISPENSING COLD WATER
• Once you have turned the cooling switch into the ON position it will take initially
1 hour for the water to cool. During this time the cold indicator light above the
cold water icon will be steady and the compressor could run continuously. This is
normal. The light will be turned off once the water is cooled.
1. Position a glass or other container under the water spout.
2. Depress the cold water push button downward to begin the ow of water.
3. Release the cold water button to stop the water ow.
DISPENSING HOT WATER
• Once you have turned the heating switch into the ON position it will take initially
15 - 20 minutes for the water to heat up. During this time the hot indicator light
above the hot water icon will be steady. The light will be turned off when the
heating process is complete.
1. Position a glass or other container under the water spout.
2. Slide the red child safety lock forward and depress the hot water button
downward at the same time to begin the ow of water. Continue to hold both
buttons as long as you want the water to ow.
3. Release both the hot water button and the child safety lock to stop the water
ow. The child lock will automatically go back to lock position.
FILTER INDICATOR LIGHT
• This light will indicate when the water cooler is working and ltering the water.
The light will turn off when the ltration process is completed. The ltered water
can still be dispensed from the tank while the ltration is working. The lter
indicator light will turn off once the water tank is full.
Child Safety Lock Cold
Hot

Page 15
FILTER INSTALLATION
WARNING: Be sure to unplug from the electrical supply source and shut off the
water supply valve before replacing the lters.
Your water dispenser comes with a 4-stage ltration system. The lters
should be replaced every 6 months. When the lters need to need to be
replaced there is an audible beep, beep.
REPLACEMENT FILTERS
• Use Replacement Filter Model WDF1 to purchase a set of 4 replacement lters.
It is recommended that you check with the retailer where you purchased your
water dispenser, or online retailers. You can also contact the BLACK+DECKER
Customer Satisfaction Center at 844-299-0879 or [email protected].
Before installing the lters
The lters should be primed for approximately 2 minutes for each lter.
1. Twist the lter into the provided Filter Flushing Adapter by rotating it clockwise.
2. Take the open end of the ¼” tube that is connected to your water supply and
insert it into the left inlet hole on the Filter Flushing Adapter in the direction of the
arrow.
3. Hold the lter with the Filter Flushing Adapter in place over a sink. Turn the Valve
of the Metal Adapter at the water source to the on position (the on position is
parallel to the ¼” plastic tube) and allow the water to ow through the Adapter
and the lter for approximately 2 minutes to prime the new lter.
SET UP & USE

Page 16
SET UP & USE
4. Turn the Valve of the Metal Adapter at the water source back to the off position;
remove the lter from the Filter Flushing Adapter.
5. Remove the end of the ¼” plastic tube from the Filter Flushing Adapter by
pressing in on the push to disconnect the ring and pulling out the tube.
Repeat the process for each lter.
INSTALLING AND REMOVING THE FILTERS
1. Open the cabinet door of the unit. Insert the lters into the lter adapter located
inside the cabinet by rotating them clockwise. The lters are numbered 1-4. Install
each in order with lter 1 on the far left and completing the process with lter 4
on the right. To remove the lters, turn them counterclockwise.
2. After replacing lters press the lter rest button on the back panel. This will stop
the audible beep, beep.

Page 17
Caution: The dispenser will heat water to
a temperature of approximately
185°F. It can cause severe burns
if not handled carefully. Please
use caution while operating and
cleaning.
Please allow ample time for any
hot water inside the machine to
cool down before draining it.
Do not use harsh chemicals,
abrasives, ammonia, chlorine
bleach, solvents or metal
scouring pads.
CLEANING THE EXTERIOR
OF THE WATER
DISPENSER
The exterior cabinet of the unit can be
cleaned with a mild soap and water
solution and dried with a soft cloth.
Remove accumulated water from the
drip tray, clean and dry it thoroughly
before replacing it.
CLEANING THE INTERIOR
OF THE WATER DISPENSER
NOTE: Only remove the parts as
described in the instruction.
It is recommended that you clean the
interior of the water dispenser every 6
weeks.
1. Remove the two screws located on
the back (at the top, in line with the
switches) of the cooler. Remove the
top cover by lifting at an angle and
pull off. Remove the white, cold water
tank cover and the separator which will
allow access to the cold water tank.
2. Mix approximately one gallon of clean
water with a nontoxic cleaner such as
baking soda or vinegar. Pour
the solution into the cold water
tank. Make sure it can ow out
of the water spout by pressing
the hot water button.
NOTE: You can use a non-abrasive
cleaner of your choice however we
have recommended non-toxic cleaners.
Regardless of what cleaner you use it
is important to make sure the cleaner is
thoroughly rinsed and drained to avoid
contaminating the water.
3. Plug in the unit and turn on the
heating switch. Allow the water to
heat for approximately 15 minutes.
4. Turn off the heating switch and allow
the water to cool for at least 20
minutes.
CLEANING AND CARE
WARNING
Always unplug your water dispenser
before cleaning to avoid electric
shock. Ignoring this warning
may result in death or injury
CAUTION
To avoid personal injury or
product damage always read and
follow manufacturer’s instructions and
warnings before using any
cleaning products.
CLEANING AND MAINTENANCE

Page 18
5. Allow approximately 1 liter of the
cleaning solution through the spout
by pressing the hot and cold water
buttons. You can wipe the opening
of the cold water tank opening with a
sponge.
Place a large bucket beneath the drain
outlet located on the back of the unit.
Remove the drain cover and allow the
water to drain from the unit. Water
will start owing as soon as the drain
cover is removed.
6. Follow the steps for Rinsing the
Water Dispenser. Rinse with plain
warm water 2-3 times, making sure to
also rinse the spout, by pressing the
hot and cold buttons so there is no
residue from the cleaning solution.
Make sure there is no cleaning residue
before dispensing drinking water.
RINSING THE WATER
DISPENSER
1. Remove the two screws located on
the back (at the top, in line with the
switches) of the cooler. Remove the
top cover by lifting at an angle and
pull off. Remove the white cold water
tank cover and the separator which will
allow access to the cold water tank.
2. Pour 0.6 gallons of clean water into
the cold water tank.
3. Place a large bucket beneath the drain
outlet located on the back of the unit.
Remove the drain cover and allow the
water to drain from the unit. Water
will start owing as soon as the drain
cover is removed.
4. Once water is completely drained,
replace the drain cover. Reinstall
the separator and the cold water
tank cover. Replace the top cover
and secure it with the 2 previously
removed screws.
DRAINING THE
WATER
DISPENSER
Place a large bucket
beneath the drain outlet
located on the back of
the unit. Remove the
drain cover and allow
the water to drain from
the unit. Water will start
owing as soon as the
drain cover is removed.
VACATION AND MOVING
CARE
• When going on vacation, or if the
water dispenser will not be in use for a
long period turn OFF the hot and cold
switches and Unplug the unit.
• Drain and clean the unit according to
the CLEANING AND MAINTENANCE
instructions.
• When travelling or moving always
transport the unit vertically. Moving
the unit horizontally may damage the
water dispenser and/or its compressor.
• The unit should be covered to protect
from dust or debris.
CLEANING AND CARE

Page 19
BEFORE YOU CALL FOR SERVICE
CUSTOMER SERVICE
IF THE WATER DISPENSER FAILS TO OPERATE:
A) Check to make sure that the unit is plugged in securely. If it is not, remove the
plug from the outlet, wait 10 seconds and plug it in again securely.
B) Check for a blown circuit fuse or a tripped main circuit breaker. If these seem to
be operating properly, test the outlet with another appliance.
IF NONE OF THE ABOVE SOLVES THE PROBLEM, CONTACT A QUALIFIED
TECHNICIAN. DO NOT TRY TO ADJUST OR REPAIR THE WATER DISPENSER
YOURSELF.
IMPORTANT
DO NOT RETURN THIS PRODUCT TO THE STORE
If you have a problem with this product, please contact the
W Appliance Co. Customer Satisfaction Center at 1-855-855-0294.
DATED PROOF OF PURCHASE, MODEL # AND SERIAL #
REQUIRED FOR WARRANTY SERVICE
BEFORE YOU CALL FOR SERVICE
CUSTOMER SERVICE
IMPORTANT
DO NOT RETURN THIS PRODUCT TO THE STORE
If you have a problem with this product, please contact the
W Appliance Co. Customer Satisfaction Center at 1-855-855-0294.
DATED PROOF OF PURCHASE, MODEL # AND SERIAL #
REQUIRED FOR WARRANTY SERVICE
TROUBLESHOOTING & WARRANTY

Page 20
TROUBLESHOOTING & WARRANTY
TROUBLE POSSIBLE CAUSE POSSIBLE REMEDY
Water Dispenser does
not work
A. Unit is not plugged in or
plug is loose
B. Fuse has blown or is
defective
C. Wall power socket is
defective
A. Plug in the water dispenser
B. Check fuse, replace if
necessary
C. Contact a qualied
electrician
No hot or cold water A. Over consumption of hot or
cold water in short time
B. Unit is not plugged in or
plug is loose
C. Heating or cooling switch is
not turned on
A. Wait for the water tank to
rell
B. Plug in the water dispenser
C. Turn on heating or cooling
switch
No water running out of
spout
A. The buttons to dispense
water were not depressed
enough
B. There may be an
obstruction or loose
connection
C. Cold water is not running
out of the spout and the
water dispenser was in
extreme conditions
A. Press the buttons down
completely. If the hot water
is not coming out of the
spout make sure the child
lock is pushed forward at
the same time the button is
depressed
B. Shut off the heating and
cooling switches, Unplug
the water dispenser and
check all connections to
make sure water valves
are open and there are no
obstructions
C. The water dispenser should
be located in an area where
the temperature is at least
50 degrees Fahrenheit. If it
was in extreme conditions
and water was frozen
allow it to warm at room
temperature
Noisy Operation A. The water dispenser is not
on a at, even surface
A. Place the water dispenser
on a at, even surface
Troubleshoot your problem by using the chart below. If the water dispenser still does
not work properly, contact W Appliance Co. customer service center or the nearest
authorized service center. Customers must never troubleshoot internal components.
TROUBLESHOOTING