Commlite CM-DG-L User manual

Automatic Macro Extension Tube for Panasonic/Leica/Sigma L-Mount Camera
User Manual

Description
Notice
Thanks for purchasing COMMLITE CM-DG-L
The extension tube is only suitable for macro shooting and can not focus
infinitely after installed
The focusing distance is limited after installing the extension tube, and the
focusing range is different with different focal lengths so you can adjust
the focal length by changing the distance between the object and the
camera or by operating the zoom device of the main lens
The exposure needs to be increased after the extension tube is installed
(It is recommended that you use it with external flash and tripod)
Support Auto-focus, but if the depth of the subject is very shallow and the
focus is not accurate, it is recommended to switch to manual focus mode
1

Main Features
Components
Lens Connecting SideCamera Connecting Side
Metal Signal Contact
Lens Release Button
Lens Mounting Mark
Lens Mounting Mark
Metal Signal Contact
1. Focus on Exact Macro Shooting
2. Support Exact TTL Exposure and Auto-focus
3. Support Electronic Aperture Control and EXIF INFO. Transmitting
4. Two Ring Designs(10mm/16mm), Three Di¬fferent Combinations
5. Compatible with All Panasonic/Leica/Sigma L-mount Cameras
6. All Aluminum Alloy Material, Stable and Durable
2

Assemble and Disassemble
1. Assemble
Step 1. Connect the L-Mount lens to CM-DG-L Extension Tube
Refer to the follow illustration, press down the ‘lens release button’ of
the Extension Tube, align the red mark on the L-Mount lens to the
corresponding mark on the Extension Tube, and turn clockwise until
tightened
3

Step 2. Connect the Extension Tube to L-Mount camera
Refer to the follow illustration, press down the ‘lens release button’ of
the L-Mount camera, align the red mark on the Extension Tube to the
corresponding mark on the camera, and turn clockwise until tightened
4

2. Disassemble
Step 1. Turn off the camera power, then take off the Extension Tube which is
connected with L-Mount lens from L-Mount camera
Refer to the follow illustration, press down the ‘lens release button’ of
the L-Mount camera, turn counterclockwise the Extension Tube which
is connected with L-Mount lens until it can be easily taken off
5

Step 2. Take off the L-Mount lens from the L-Mount Extension Tube
Refer to the follow illustration, press down the ‘lens release button’ of
the Extension Tube, turn counterclockwise the L-Mount lens until it
can be easily taken off
6

Specifications
Compatible Lens
Compatible Camera
Front Installation
Rear Installation
Camera-Mount Outer Diameter
Lens-Mount Outer Diameter
Length
Net Weight
L-Mount Lens
L-Mount Camera
L-Mount Lens
L-Mount Camera
61mm
63mm
32mm
81g
7

松下/徕卡/适马相机L卡口自动近摄接圈产品使用说明书

前 言
注意事项
感谢您购买咔莱CM-DG-L接圈只适用于拍微距，装上接圈后，不能无限远合焦 装上接圈后，对焦距离有限，不同焦距的可对焦范围不同，您可以通过改变物体与相机的距离或者操作主镜头的变焦装置来调整焦距加装近摄接圈后，需要增加曝光（建议您配合外闪及脚架使用） 支持自动对焦，但如果被摄物体深度非常浅，也会使对焦不实，如想严密对焦，建议切到手动对焦模式1

主要功能
部件名称 镜头连接端相机连接端电子信号触点镜头释放拨杆镜头安装标记镜头安装标记电子信号触点1. 专注于精准微距拍摄 2. 支持精准的TTL曝光及自动对焦 3. 电子光圈可调，EXIF信息传输4. 10mm,16mm两组接圈设计，三种不同搭配选择 5. 适用于所有松下/徕卡/适马L卡口相机 6. 全铝合金材质，稳固耐用2

安装及拆卸近摄接圈
1. 安装
步骤1. 将L卡口镜头安装到CM-DG-L近摄接圈上如图，按下近摄接圈上的镜头释放拔杆，将L卡口镜头上的红色标记对准近摄接圈镜头端卡口上的相应标记，顺时针方向旋入至拧紧为止3

步骤2. 将近摄接圈安装到L卡口相机如图，按下L卡口相机上的镜头释放按钮，将近摄接圈上的红色标记对准相机端卡口处的红色标记，顺时针方向旋入至拧紧为止4

2. 拆卸
步骤1. 关闭相机电源，然后将安装着L卡口镜头的近摄接圈从L卡口相机上取下如图，按下L卡口相机的镜头释放按钮，逆时针旋转连接着L卡口镜头的近摄接圈直至可轻松取下为止5

步骤2. 将L卡口镜头从近摄接圈上取下如图，按下近摄接圈的镜头释放拨杆，逆时针旋转镜头直至可轻松取下为止6

规格与技术参数
兼容镜头兼容相机正面安装背面安装相机端外围直径镜头端外围直径总长度重量L卡口镜头L卡口机身L卡口镜头L卡口机身61mm 63mm 32mm81g7