6
Fixed Delay
On the same screen as mentioned in the previous section, select “RANDOM.”
Now, using the MENU UP/DOWN button, advance to the “RANDOM START TIME –
MINIMUM” and “RANDOM START TIME – MAXIMUM” display screens. In both screens,
select the same delay time, between .5 seconds and 9.9 seconds. This will result in a
xed delay time at the setting specied. Note that the timer will not allow you to set a
minimum time greater than the current maximum time, or a maximum time less than
the current minimum time. It will “push” the alternate time value along to match the
setting currently being adjusted.
Random Delay
To achieve a random delay, set the maximum and minimum delay times at the outer
limits of the random delay time range desired. When started, the timer will produce a
random start delay between these limits each time start is pressed.
Display Backlighting
Use the SET UP/DOWN buttons to set the number of seconds (from 0 to 99) the
display backlighting will remain on. Setting the value to zero will turn if o. To
activate the backlight, press any button. If you would like to illuminate the current
display, press the MENU UP, then MENU DOWN button. Longer periods with the back-
light turned on will shorten battery life.
