compulocks Swell User manual

4 5 6
321
Assembly Instructions
Swell
IN THE BOX
©
Compulocks Brands Inc. All Rights Reserved.j
www.compulocks.com | [e-mail] | [phone] Sheet 1 of 1
Mounting options Or
WALL
FOLLOW STAND
MOUNTING INSTRUCTIONS
(SUPPLIED WITH STANDS)
Torx Screwdriver M3x10mm tamper proof screws Swell enclosure
WALL MOUNTING
(SCREWS NOT PROVIDED)
Secure with
M3 screws (provided)

Hinge Adjustment
Assembly Instructions
Swing Arm SKU: 827B
Sheet 1 of 2
www.compulocks.com | [e-mail] | [phone]
©Compulocks Brands Inc. All Rights Reserved.j
LOVE IT LOCK IT
Wall Mounting - Wood Stud Wood Stud Istallation
2.75”
69.85mm
DRILL 2 Holes
.157” X 2 1/2” DEEP
M4 X 63.5mm DEEP
CENTERED ON STUD
INSTALL SCREWS PROVIDED
#14 X 2 1/2” PHILIPS PAN HEAD
SHEETMETAL SCREW, 2 PLACES
STEP 1
ADJUST LARGE HINGE SCREW
TO DESIRED TENSION OF ARM
WITH WRENCH PROVIDED
STEP 2
AFTER CORRECT TENSION IS ACHIEVED
TIGHTEN SET SCREW
WITH WRENCH PROVIDED
DO NOT OVER TIGHTEN
STEP 1
ADJUST LARGE HINGE SCREW
TO DESIRED TENSION OF ARM
WITH WRENCH PROVIDED
STEP 2
AFTER CORRECT TENSION IS ACHIEVED
TIGHTEN SET SCREW
WITH WRENCH PROVIDED
DO NOT OVER TIGHTEN

Installation Complete Monitor Mounting
Assembly Instructions
Swing Arm SKU: 827B
Sheet 2 of 2
www.compulocks.com | online@ maclocks.com | [phone]
©Compulocks Brands Inc. All Rights Reserved.j
LOVE IT LOCK IT
Tilt Adjustment Enclosure Installation
ADJUST TILT TENSION SCREW
TO DESIRED TENSION
WITH WRENCH PROVIDED USE M4 X 8mm SCREWS PROVIDED
TO INSTALL ENCLOSURE
IF MOUNTING A MONITOR
REMOVE M4 PRESS IN NUTS
HARDWARE FOR MOUNTING THE MONITOR
IS NOT INCLUDED