compulocks TCDP1AO/W User manual

Assembly Instructions
321
SLIGHTLY OPEN THE
BRACKET AND INSTALL
ON RISE STAND
INSERT 2 x M5
PHILLIPS PAN HEAD
SCREWS,
FINGER TIGHT
INSERT VESA MOUNT
AND WASHERS
(ONE ON EACH SIDE)
INTO THE BRACKET.
INSERT 1 x M6 TORX BUTTON
HEAD AND FINGER TIGHTEN
POSITION
POSITION
AFTER POSITIONING,
TIGHTEN 2 x M5
PHILLIPS PAN
HEAD SCREWS
Additional Single VESA Bracket for the Rise Stand SKU: TCDP1AO/W
©Compulocks Brands Inc. All Rights Reserved.j
www.compulocks.com | [e-mail] | [phone] Sheet 1 of 2
IN THE BOX
Washers 100mm
Mounting Plate Forward Facing Bracket
Cover, LH, Forward
Facing Bracket
Cover, RH, Forward
Facing Bracket Hardware Kit 100mm Attachment Bracket

Adhesive Pad Removal
6
54
7
INSTALL YOUR TABLET ENCLOSURE
AS SHOWN USING M4 SCREWS
PROVIDED WITH ENCLOSURE
ADJUST TILT
WITH TORX WRENCH PROVIDED
ADJUST TILT TO DESIRED TENSION
INSTALL PLASTIC COVERS COMPLETED ASSEMBLY
Additional Single VESA Bracket for the Rise Stand SKU: TCDP1AO/W
©Compulocks Brands Inc. All Rights Reserved.j
www.compulocks.com | [e-mail] | [phone] Sheet 2 of 2