CONEN SCETA-TILT User manual

1
Convertible mobile stand
with anti-collision
ASSEMBLY INSTRUCTION
SCETA-TILT
CONEN/01/2020
Stirling Communications Supply Co | 29 Poplar Drive, Stirling NJ 07980 | 908-604-9360 | [email protected] | www.stirlingcomm.com

2
A B C
1
2
3
5
4
7
6
DB
3
7
4
5
2
1
6
Mobile base
Center column
Tilt frame
Remote control
Display brackets
Anti-Collision unit
(not illustrated –
pre-assembled)
IEC (power) connector
8 x M8 x 40
Lenshead Allen
screw with flange
4 x M6 x 16
Lenshead Allen
screw with flange
2 x M6 x 70
Lenshead Allen screw 1 x Cable tie
Depending on the display
4 x M8 x 16
Lenshead Allen
screw with flange
PACKAGE CONTENTS
Stirling Communications Supply Co | 29 Poplar Drive, Stirling NJ 07980 | 908-604-9360 | [email protected] | www.stirlingcomm.com

3
1 2
2
1
A
A2
3A
3 4
4
B
B
4
C
C
5 6
7
Display
MOUNTING INSTRUCTIONS
RJ plug
(column)
Molex plug
(frame)
Molex plug
(column)
Stirling Communications Supply Co | 29 Poplar Drive, Stirling NJ 07980 | 908-604-9360 | [email protected] | www.stirlingcomm.com

4
7 8
5
9
D
B
D
A
C
6
MOUNTING INSTRUCTIONS
For moving the unit up or down just press and hold the buttons
on the control unit. Releasing the button will immediately stop the
movement. So in case of emergency just unhand the control unit
(watchdog switch).
Height adjustable Tiltable
AUp CVertical position
BDown DHorizontal position
Click
INSTRUCTION REMOTE CONTROL
Stirling Communications Supply Co | 29 Poplar Drive, Stirling NJ 07980 | 908-604-9360 | [email protected] | www.stirlingcomm.com

5
11
5
10
5
7
!
7
12
13
TROUBLE SHOOTING
Calibration:
1
Press key and simultaneously until you hear 1 x audio signal
2
Press key until you hear 3 x audio signal
3
Press key and hold on until the column reached the maximum
position and you can hear 2 x audio signal.
Now repeat the points 5 6 8 9 of the mounting instructions.
System is pre-calibrated. PLEASE RECALIBRATE ONLY IN CASE OF ERROR.
Stirling Communications Supply Co | 29 Poplar Drive, Stirling NJ 07980 | 908-604-9360 | [email protected] | www.stirlingcomm.com