Connect Uniview LightHunter PTZ User manual

Uniview LightHunter PTZ

Uniview LightHunter PTZ
Login
•To access the camera on aPC you can use the web browser interface or EZStation.
•To access the web browser interface –open a web browser and type the camera IP address into the
address bar.
•To get the IP address use EZTools and look for the Device Name and Model of the camera.
•Enter the username and password, and then click Login. For the first login, use the default username
“admin”and password “123456”.

Uniview LightHunter PTZ
Web Interface
1. Menu
2. PTZ control area
3. Live view window
4. Live view toolbar

Uniview LightHunter PTZ
PTZ Control Toolbar

Uniview LightHunter PTZ
Add a preset
•On the Live View page, click Preset on the control panel.
•Adjust the camera to its desired position, zoom, and focus.
•Click to add the view as a preset –enter a number and
name for the preset and the click OK.

Uniview LightHunter PTZ
Go to a preset
•On the Live View page, click Preset on the control panel.
•Position the cursor over the preset you want to go to and
press
•The camera will go to the selected preset.

Uniview LightHunter PTZ
Delete a preset
•On the Live View page, click Preset on the control panel.
•Position the cursor over the preset you want to delete and
press
•Confirm you want to delete the preset by pressing OK.

Uniview LightHunter PTZ
Add a patrol route
•On the Live View page, click Patrol on the control panel.
•Click
•On the Add Patrol page, enter the route ID and name,
then click Add
•Up to 64 actions are allowed
•Go to a preset and stay for a set amount of time
•Rotate at a set speed in a set direction for a set
amount of time
•Zoom and stay at set position for a certain amount
of time
•Or patrol repeatedly if Keep Rotating is selected
•Click OK.

Uniview LightHunter PTZ
Make a patrol plan
•On the Live View page, click Patrol on the control panel
•Click the page for setting patrol plans will display
•Set the correct patrol time and route
•Select Enable Patrol Plan
•Click OK

Uniview LightHunter PTZ
Start a patrol route
1. On the Live View page, click Patrol on the control panel
2. Click for the patrol route you want to start

Uniview LightHunter PTZ
Auto Tracking
Click Setup > Intelligent > Smart.
Enable Auto Tracking and then click
Set the tracking timeout (unit:
sec) or set continuous tracking
Click Save

Uniview LightHunter PTZ
Alarm Light
You can set the alarm light to activate when the camera detects a person
•Go to Setup > Intelligent > Smart > Human Body Detection click
•In Rule Settings click under Snapshot Area to add an area which will
activate the alarm light if entered
•Draw the area on the camera view
•Click Save

Uniview LightHunter PTZ
Alarm Light
•In Trigger Actions enable Alarm Light
•Set the length of time you want the light to activate for in the Blink
Time field (unit: sec)
•Click Save

Uniview LightHunter PTZ
Alarm Light Schedule
•Under Plan you can set the hours the Human Body Detection and
alarm light will be active.
•By default detection is active all the time
•If you want to turn it off choose Unarmed and then drag the hours
in the schedule below you want detection off.

Uniview LightHunter PTZ
Alarm Sound
You can set the alarm sound to activate when the camera detects a
person
•Go to Setup > Intelligent > Smart > Human Body Detection click
•In Rule Settings click under Snapshot Area to add an area which will
activate the alarm sound if entered
•Draw the area on the camera view
•Click Save

Uniview LightHunter PTZ
Alarm Sound
•In Trigger Actions enable Alarm Sound
•Select the audio track you want to be played from the drop down box
field Audio
•Choose the number of times you want the audio to be played from the
Repeat field
•Click Save

Uniview LightHunter PTZ
Alarm Sound
•The numbers in the drop down box of the Audio
field on the previous page relate to this list
•To see this list go to Setup > Video & Audio >
Audio
•You can add your own files here (files must be
PCM and no bigger than 100 Kb

Uniview LightHunter PTZ
Alarm Sound Schedule
•Under Plan you can set the hours the Human Body Detection and
alarm sound will be active.
•By default detection is active all the time
•If you want to turn it off choose Unarmed and then drag the hours
in the schedule below you want detection off.

Uniview LightHunter PTZ
2-way Audio
You can use the 2-way audio functionality on the EZView app to
communicate through the camera.
•Add the camera through the Devices menu
•In the Live View screen press the 2-way Audio button on the
bottom bar
•You can now talk through the app and your voice will be
played from the inbuilt speaker
•You can hear sound from the inbuilt microphone through the
app