Conservator GRM183QW User manual

Refrigerator-Freezer
· GRM183QW
INSTALLATION & OPERATION MANUAL
· GRM183QB
· GRM183QD

Contents
1. SAFETY WARNINGS............................................................................................................ 1
2. INSTALLATION................................................................................................................... 2
2.1 Locaon...................................................................................................................... 2
2.2 Reversing the Door Swing(oponal) .......................................................................... 3
2.3 Door Space Requirements.......................................................................................... 6
2.4 Leveling the Unit ........................................................................................................ 6
2.5 Cleaning Before Use ................................................................................................... 6
2.6 Before Using Your Unit............................................................................................... 7
2.7 Interior Accessories.................................................................................................... 7
2.8 Icemaker Installaon.................................................................................................. 7
2.9 Connecng Ice Maker to Water Supply ................................................................... 12
3. PRODUCT OVERVIEW ...................................................................................................... 14
4. OPERATION...................................................................................................................... 14
4.1 Key............................................................................................................................ 14
4.2 Display Screen .......................................................................................................... 14
4.3 Display ...................................................................................................................... 15
4.4 Shi Seng .............................................................................................................. 15
4.5 The Standby Control Funcon .................................................................................. 15
4.6 Fault Indicaon ......................................................................................................... 15
4.7 Temperature Control Operaon .............................................................................. 15
5. CLEANING ........................................................................................................................ 16
5.1 Defrosng................................................................................................................. 16
5.2 Cleaning the Interior and the Exterior of the Unit ................................................... 16
5.3 Cleaning Tips ............................................................................................................ 16
6. MAINTENANCE ................................................................................................................ 16
6.1 Changing the Internal Light ...................................................................................... 16
6.2 Care When Handling / Moving Your Unit................................................................. 16
6.3 Servicing ................................................................................................................... 16
6.4 Switching Off for Long Periods of Time.................................................................... 16
7. Troubleshoong .............................................................................................................. 17
7.1
Quick ps ................................................................................................................. 17

1
1. SAFETY WARNINGS
1) WARNING―Do not use mechanical devices or other means to accelerate the defrosting
process, other than those recommended by the manufacturer.
2) WARNING―Do not damage the refrigerant circuit.
3) WARNING―Do not use electrical appliances inside the food storage compartments of the
appliance, unless they are of the type recommended by the manufacturer.
4) WARNING―DANGER: Risk of child entrapment. Before you throw away your old
refrigerator or freezer;
•Take off the doors
•Leave the shelves in place so that children may not easily climb inside.
5) The appliance has to be unplugged after use and before carrying out user maintenance on the
appliance.
6) This appliance can be used by children aged from 8 years and above and persons with
reducedphysical sensory or mental capabilities or lack of experience and knowledge if they
have been given supervision or instruction concerning use of the appliance in a safe way and
understand the hazards involved. Children shall not play with the appliance. Cleaning and user
maintenance shall not be made by children without supervision.
7) If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or
similarly qualified persons in order to avoid a hazard.
8) Please dispose of the refrigerator according to local regulations for it usesflammable blowing gas
and refrigerant.
9) This appliance is intended to be used in household and similar applications such as
–staff kitchen areas in shops, offices and other working environments;
–farm houses and by clients in hotels, motels and other residential type environments;
–bed and breakfast type environments;
–catering and similar non-retail applications.
10) Do not use an extension cord with this appliance. If the power cord is too short, have a
qualified electrician or service technician install an outlet near the appliance. Use of an extension
cord can negatively affect the performance of the unit.
IT IS HAZARDOUS FOR ANYONE OTHER THAN AUTHORIZED SERVICE PERSONNEL
TO CARRY OUT SERVICING OF REPAIRS WHICH INVOLVE THE REMOVAL OF COVERS.
TO AVOID THE RISK OF AN ELECTRICAL SHOCK DO NOT ATTEMPT REPAIRS YOURSELF.

2
2. INSTALLATION
2.1 Loca on
When selec ng a posi on for your unit you should make sure the floor is flat and firm, and the
room is well ven lated. Avoid loca ng your unit near a heat source, e.g. cooker,boiler or radiator.
Also avoid direct sunlight as it may increase the electrical consump on. Extreme cold ambient
temperatures may also cause the unit not to perform properly. This unit is not designed for use in
a garage or outdoor installa on. Do not drape the unit with any covering.
When installing the unit,ensure that 3 inch of free space is le at both sides,1 inch at the rear
and 1 inch at the top of the unit. This will allow cold air to circulate around the refrigerator and
improve the efficiency of the cooling process.

Center hinge
3
2.2 Reversing the Door Swing
Reversing the door position
Parts included with the hinge kit: Parts already mounted on the door (as shipped):
Center left hinge Left top hinge cover Top left hinge
Upper door
self-locking block L Plug pins (2)eft door-open
stopper
Center right hinge Right top hinge cover Top right hinge
Door block
Upper door
self-locking block Right door-open
stopper
Bottom hinge
1Unplug your refrigerator and remove all food from the door shelves.
2Remove the left cover plate and the right top hinge cover, then
unscrew and remove the right top hinge. Keep the screws to reuse.
3Lift the freezer door up and away from your refrigerator.
4Unscrew the three screws holding the center hinge, remove the hinge,
then lift the refrigerator door up and away from your refrigerator. Save
the screws to reuse.
Right top
hinge cover
Left cover plate

4
5Unscrew the two screws holding the bottom hinge, then
remove the bottom hinge from the bottom right side of
the refrigerator.
6Unscrew the hinge pin from the right side of the bottom
hinge and move it to the left side, then secure the bottom
hinge to the bottom left side of the refrigerator, using the
screws you removed previously.
7Remove the plastic bushing from the top right of the
freezer and refrigerator doors.
8Remove the hole cap from the top left of refrigerator
door and insert it in the other side.
9Insert the plastic bushings into the
left sides of freezer and refrigerator
doors.
10 Remove the door block from the
bottom, right side of the door
and attach it to the other side.
11 Attach the left upper door self-locking
block and the left door-open stopper
to the left side of the freezer door.
Upper door
self-locking block
Left door-open
stopper
Remove the
bottom hinge
Reattach the
bottom hinge
Hinge pin
Hinge pin

5
12 Remove the right upper door self-locking block and the right
door-open stopper. Store in a safe place in case you need to reverse
the door position again.
13 Remove the two hole caps from the left side, where the center hinge
will go, and insert them into the other side.
14 Attach the refrigerator door on the bottom hinge, then attach the
center left hinge to the left side of the refrigerator.
15 Put the freezer door onto the center left hinge, then attach the top left
hinge to the top of refrigerator. Cover the hinge with the top left hinge
cover and cover the screw holes on the right side of the top with the
cover plate you previously removed.
Attach the top left hinge
Attach the left center hinge

6
2.3
Door Space Requirements
The unit's door must be able to open fully as shown.
W×D≥50.8 inch×58.5 inch
2.4
Leveling the Unit
To do this,adjust the two leveling feet at the front of the unit.
If the unit is not level, the door and magne c seal alignments
will not be covered properly.
Look down from the top, clockwise and counterclockwise loosening, ghtening.
2.5
Cleaning Before Use
Wipe the inside of the unit with a weak solu on of bicarbonate soda. Then rinse with warm
water using a 'Wrung-out' sponge or cloth. Wash the shelves and salad bin in warm soapy water
and dry completely before replacing in the unit. Clean the exterior of the unit with a damp cloth.
If you require more informa on refer to the Cleaning sec on.
W
D

7
2.6 Before Using Your Unit
The refrigerator adopts 115V/60Hz AC power, voltage fluctuaons over the range of 98 ~ 132V
will cause malfuncon or even damage.
Do not damage the power cord under any condion so as to ensure safety use, do not use when
the power cord is damaged or the plug is worn.
Do not put flammable, explosive, volale and highly corrosive items in the refrigerator to prevent
damages to the product or fire accidents.
Do not place flammable items near the refrigerator to avoid fires.
This product is household refrigerators and shall be only suitable for the storage of foods.
According to naonal standards, household refrigerators shall not be used for other purposes,
such as storage of blood, drugs or biological products.
Do not place items such as boled or sealed container of fluid such as boled beers and
beverages in the freezer to prevent bursts and other losses.
Before placing any food in your unit, turn it on and wait for 24 hours, to make sure it is working
properly and to allow it me to fall to the correct temperature. Your unit should not be overfilled.
Do not store or place dry ice in the refrigerator.
◆Before Plugging in
You must check that you have a socket which is compable with the plug supplied
with the unit.
◆Before Turning On!
Do not turn on unl two hours aer moving the unit.
2.7 Interior Accessories
Various glass or plasc storage shelves are included with your appliance - different
models have different combinaons.
You should always slide one of the full size glass storage shelves into the lowest set of
guides, above the fruit and vegetable containers, and keep it in this posion. To do
this, pull the storage shelf forward unl it can be swiveled upwards or downwards
and removed.
Please do the same in reverse to insert the shelf at a different height.
In order to make the full use of the volume of the fresh food storage compartment and
frozen-food storage compartment, the user can remove one or more shelves, drawers, out
of the appliance, according to your daily use.
2.8 Icemaker Installaon(oponal)
AnThe refrigerator is ready for ice maker installaon. Please use the correct ice maker kit.
Check with your dealer, use the model IM1800MD Ice Maker

8
Remove a protective cover before connecting the wire of the ice machine in the box.
Tools Required: •1/4 inch copper supply line with shut off valve
•1/4 inch brass compression nut and ferrule
The copper tubing and shut off valve are available in a kit from your local hardware or plumbing
supply store. Coil enough tubing at the back of the unit to allow movement for cleaning.
Unplug the refrigerator. To eliminate the danger of electric shock during installation, you
must unplug the refrigerator from its electrical outlet.
Tools Required: •Putty Knife, pliers, 1/4" socket wrench, needle nose pliers or nut driver, adjustable
wrench, knife.
FOR INFORMATION ONLY -
Please refer to the instructions included with the ice maker kit for precise instructions.