Contardi Cube Instruction Manual

Pag. 1/2
ALL OPERATIONS MUST BE CARRIED OUT BY QUALIFIED PERSON
INSTALLING INSTRUCTIONS
DATE
Cube
10-06-2019 N.O.
DRAWN BY
ASSEMBLY and ON SWITCHING
3) Rotate the cylinder with the light source until
the rst click.
The rst click is the “o” position.
Rotate until you reach the extraction position.
4) Unfasten the cylinder with the light source.
Pull the cylinder with the light source, which
easily come o the cylinder in the upper part of
the lamp.
1) Fasten the light source.
Fasten the cylinder with the light source to the
cylinder slot on the upper part of the lamp.
2) Rotate the light source.
The cylinder with the light source has two
positions: the rst one is “o”, the second one at
the end of rotation is“on”.
2. OFF
2. ON
OFF SWITCHING and DISMANTING
3.Extraction Position
3. OFF
4

Pag. 2/2
ALL OPERATIONS MUST BE CARRIED OUT BY QUALIFIED PERSON
INSTALLING INSTRUCTIONS
DATE
Cube
10-06-2019 N.O.
DRAWN BY
CHARGING
5) Plug the charger in. 6) Position the cable as shown in the image.
USB connected battery not inserted Fast ashing
GREEN LED RED LED
USB connected discharged battery inserted
USB connected full charged battery inserted