Contour BALANCE keyboard Wired User manual
Wired
Product Manual
Balance Keyboard Wired - REV 1.0 /1
1
2
Box content
1. Balance Keyboard Wired
2. User Guide
Balance Keyboard Wired - REV 1.0 /2
Function and Media Control Keys
A. Media Control Functions
B. Application Functions
C. Interface Functions
D. Fn Keys*
E. Risers
* The Fn key toggles between function [1-12] and media
modes. By default the media keys are active.
B C
E
A
D
Balance Keyboard Wired - REV 1.0 /3
Keyboard TiltStart using your keyboard
The adjustable legs on the Balance Keyboard have three tilt options:
Positive tilt
Netural tilt
Negative tilt
Connect the Balance Keyboard to your computer. There are three dierent
ports for the USB-cable for it to t your worktable properly.
Balance Keyboard Wired - REV 1.0 /4
Keyboard Shortcuts - Function
By default, Balance Keyboard comes with function mode (F1-F12) set to
OFF. Meaning the media keys are active.
To activate function mode, press the Fn key.
To change the default setting to function mode ON, follow the instructions
below:
Press Fn button and hold.
Press CapsLock and hold.
Press D button.
Release D button.
Release FN and CapsLock buttons.
To toggle back, use the same instructions but replace the D button with F
button.
Balance Keyboard Wired - REV 1.0 /5
PC Mode
For PC mode hold Fn + Caps lock and press and release W key.
Keyboard Shortcuts - PC Mode & Mac Mode
Balance Keyboard is a PC keyboard, compatible with Mac. You toggle be-
tween Mac mode and PC mode as descibed here.
Mac Mode
For Mac mode hold Fn + Caps lock and press and release M key.
For more information please visit:
www.contour-design.co.uk
Quay House
The Waterfront
Brierley Hill, Dudley
West Midlands, DY5 1XD
United Kingdom
Phone: +45 70 27 02 27
Email: [email protected]
Tested to comply with FCC
and IC standards.
FCC Statement
Changes or modications not expressly approved by the party responsible for compliance could void the user’s authority to operate the
equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses
and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1) this device may not cause harmful
interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
IC Statement
This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions:
(1) This device may not cause interference; and
(2) This device must accept any interference, including interference that may cause undesired operation of the device.
The term “IC: “ before the certication/registration number only signies that the Industry Canada technical specications were met. This
product meets the applicable Industry Canada technical specications.
Le présent appareil est conforme aux CNR d’Industrie Canada applicable aux appareils radio exempts de licence. L’exploitation est autorisée
aux deux conditions suivantes : (1) l’appareil ne doit pas produire de brouillage,
et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le
fonctionnement
Warranty
If there is a functional defect due to faulty manufacturing, we will replace the product. This warranty does not cover damage that results from
misuse of the product.
Attention!
If you attempt to dismantle the product, you will invalidate your warranty.
Table of contents
Other Contour Keyboard manuals
