Controller Creator Mega Mod User manual

You are now the proud owner of our exclusive Mega Mod!
The Mega Mod is our ultimate modded controller and features all of the mods that we
offer for the PlayStation 3®. The Mega Mod comes with 9 different features compatible
with Call of Duty®, Battlefield®, Destiny®, and much much more.
Our Adjustable Rapid Fire feature is compatible with all major first-person shooters and
allows you to fine-tune the rate of fire in your favorite titles. For the latest game updates,
visit controllercreator.com.
To maximize your potential, be sure to read the instructions fully before operating the
Mega Mod.
BEFORE YOU GET STARTED:
Set your Button Layout!
Our controller supports all 10 Call of Duty button layouts. To change your controller’s
button layout with your in-game selected button layout, follow these instructions:
Hold down the Mod switch, then hold triangle to change the button layout. The Player 4
LED will blink slowly to indicate which button layout you have selected. Keep holding
both buttons to cycle through all of the available layouts.
Hold the Mod Button + Hold Triangle –Change Button Layout
Hold Triangle Button
To Change Button Layouts:
Layout 1:
Layout 2:
Layout 3:
Layout 4:
Layout 5:
Layout 6:
Layout 7:
Layout 8:
Layout 9:
Layout 10:
Default
Tactical
Lefty
Nom4d*
Nom4d Tactical (Charlie)*
DefaultAit
Tactical Flipped
Lefty Flipped
Nom4d Flipped*
Nom4d Tac Flip*
*Limited mod support in Nom4d layouts

Super-Fast Rapid Fire Group Switching:
Change your rapid fire immediately by following these instructions:
Hold down the Mod switch then tap any one of the following buttons to switch to that
Rapid Fire. The mod switches Rapid Fire group immediately, and the Player 4 LED
flashes quickly to acknowledge. When any Rapid Fire mode is enabled, Player 4 LED
stays illuminated.
Hold the Mod Button + Hold the Button Below - Change Rapid Fire Group
Press This Button
To Change to This
Rapid Fire Group
What does this Rapid Fire
Group do for me?
Fire Weapon
Single-trigger Rapid Fire
Turns single-fire guns into full-auto guns
ADS (Scope)
Dual-trigger Rapid Fire
Turns single-fire guns into full-auto guns
Throw Tactical
Zombie Auto-Aim
Enables auto-aim when in
Zombie arcade mode
D-Pad Up
Jitter
(Jitter Rapid Fire)
Increase the firing rate of most guns
(patched in MW3)
D-Pad Left
Akimbo Rapid Fire
Unload your semi-auto Akimbo pistols in
the blink of an eye
D-Pad Right
Burst Rapid Fire
Fires most guns with 2, 3, 4 or 5-round
bursts
D-Pad Down
All Rapid Fire turns off
Quickly turns off all Rapid Fire!
SUPER-FAST MOD TOGGLING:
Hold down the Mod Switch, then tap any one of the following buttons to toggle that
feature on or off. The mod toggles that special mode on/off immediately, and the Player
3 LED flashes quickly to acknowledge. When any special mode is enabled, Player 3
LED stays illuminated.
Hold the Mod Button + Hold the Button Below –Toggle Mod On/Off
Press This Button
To Toggle This Mode
What does this Mod do for me?
Melee Attack
Quick Scope
Tap your ADS button to shoot a
single quickscope
Hold Breath
Auto Scope
When scoping, holds your breath
automatically
Reload
Fast Reload
Reload your gun faster
(patched in MW3)
Crouch/Prone
Drop Shot
Drop the ground
when you fire your weapon
Throw Lethal
Turbo Melee
Knife faster than usual
(requires Semtex)
Jump(X)
All Special Mods
Turned Off
Quickly turns off
all special features!

CHANGING MODES WITHIN EACH GROUP
In addition to Fast Rapid Fire Switching and Mod toggling, the Rapid Fire Groups and
Special Features can also be customized. Hold down the Mod Switch, then hold down
any one of the following buttons to customize your mod. Player 4 LED will blink slowly to
indicate which mode you are changing to. Our Mega Mod will always remember your
selections, even when you power off your controller.
Hold Mod Switch + Hold Fire Weapon Button –Scroll through Rapid Fire Speeds
Hold Fire Weapon Button
Rapid Fire Speeds to Scroll Through
Mode 1:
Modern Warfare 3 - All other pistols
Mode 2:
Modern Warfare 3 - MK14
Mode 3:
Modern Warfare 3- P99 and Five-Seven
Mode4:
Black Ops
Mode 5:
MW2
Mode 6:
MW2 w/doubletap
Mode 7:
Halo Series
Mode 8:
GTA4
Mode 9:
Gears of War Series
Mode 10:
World at War•
*Special mode only for use with World at War
Hold Mod Switch + Hold Throw Tactical –Change Zombie Modes Available
Hold Throw Tactical
To Change Zombie Modes Available:
Mode 1:
Zombie auto-aim, no Rapid Fire
Mode 2:
Zombie auto-aim, plus Rapid Fire
Hold Mod Switch + Hold D-Pad Up –Change Jitter Modes
Hold D-Pad Up
To Change Jitter Modes:
Mode 1:
Jitter YY stays on always
Mode 2:
When seeped, Jitter YY turns off
Mode 3:
Jitter XYY stays on always
Mode 4:
When seeped, Jitter XYY turns off
Hold Mod Switch + Hold D-Pad Left –Change Akimbo Modes
Hold D-Pad Left
To Change Akimbo Modes
Mode 1:
When seeped, Rapid Fire is right-side only
Mode 2:
When seeped, Akimbo mode turns off
Mode 3:
Akimbo stays on always

Hold Mod Switch + Hold D-Pad Right –Change Burst Firing Rate
Hold D-Pad Right
To Change Burst Firing Rate
Mode 1:
2-round burst
Mode 2:
3-round burst
Mode 3:
4-round burst
Mode 4:
5-round burst
Hold Mod Switch + Hold Reload –Change Fast Reload Timing
Hold Reload
To Switch the Fast Reload timing:
Mode 1:
Gun 1- Timing 33
Mode 2:
Gun 2 -Timing 34
Mode 3:
Gun 3- Timing 36
Mode 4:
Gun 4- Timing 42
Mode 5:
Gun 5- Timing 53
Mode 6:
Gun 6- Timing 54
Mode 7:
Gun 7- Timing 56
Mode 8:
Gun 8- Timing 63
Mode 9:
Gun 9- Timing 213
Mode 10:
Gun 10- Timing 214
ADJUSTABLE RAPID FIRE PROGRAMMING
If you need to adjust your rate of fire beyond the 10 pre-set rapid fire speeds, you can
create your own! Reprogram your Rapid Fire mode to any speed from 5 shots-per-
second up to 99 shots-per-second. Rapid Fire speed is programmed by individually
setting the tens digit, the ones digit, and the decimal digit.
For example, if the speed is 16.2 shots per second. "1" is the tens digit, "6" is the ones digit, and
"2" is the decimal digit.
Any time an LED or LED's flash very quickly, this means one of your numbers is set to
"0". Otherwise it will slowly blink the number. When in Adjustable Rapid Fire
programming mode, hold L1 to decrease speed, R1 to increase speed, or tap the Mod
Switch to save the setting. To enter into Adjustable Rapid Fire programming mode, hold
Mod switch, left bumper, right bumper, and then pull the right trigger. The controller will
let you know that it has entered programming mode by alternating the Player 3 and 4
LED's a few times. The controller will then flash the tens digit to you on the Player 4
LED. Adjust the speed and then tap the Mod Switch. The controller will then flash the
ones digit to you on the Player 3 LED. Adjust the speed and then tap the Mod Switch.
The controller will then flash the decimal digit to you on the Player 3 and Player 4 LEDs.
Adjust the speed and then tap the Mod Switch. The controller will let you know that it
saved your new speed by alternating the Player 3 and 4 LED's a few times.

ADJUSTABLE RAPID FIRE PROGRAMMING COMMANDS
Hold Mod Switch + Hold L1 + Hold R1 + Tap R2 = Enter Adjustable Rapid Fire Mode
Hold L1 = Decrease Speed
Hold R1 = Increase Speed
Mod Switch = Save Setting
CUSTOMIZE FAST RELOAD SPEED PROGRAMMING
Just like Adjustable Rapid Fire, you can adjust your Fast Reload delay to work with
virtually any gun in the Call of Duty series. Fast reload delays are programmed by
individually setting the hundreds digit, the tens digit, and the ones digit. For example, if
the reload delay is 105 units, "1" is the hundreds digit, "0" is the tens digit, and "5" is the
ones digit. Any time an LED or LED's flash very quickly, this means one of your
numbers is set to "0". Otherwise it will slowly blink the number.When you enter Fast
Reload adjustment programming mode, hold L1 to decrease speed, R1 to increase
speed, or tap the mod switch to save the setting. To enter into Adjustable Fast Reload
speed programming mode, hold the mod switch, left bumper, right bumper, and then tap
the Square button. The controller will let you know that it has entered programming
mode by alternating the Player 3 and 4 LED's a few times. The controller will then flash
the hundreds digit to you on the Player 3 and Player 4 LEDs. Adjust the speed and then
tap the mod switch. The controller will then flash the tens digit to you on the Player 4
LED. Adjust the speed and then tap the mod switch. The controller will then flash the
ones digit to you on the Player 3 LED. Adjust the speed and then tap the mod switch.
The controller will let you know that it saved your new speed by alternating the Player 3
and 4 LED's a few times.
ADJUSTABLE FAST RELOAD PROGRAMMING COMMANDS
Hold Mod Switch + Hold L1 + Hold R1 + Tap Square = Enter Fast Reload Programming Mode
Hold L1 = Decrease Speed
Hold R1 = Increase Speed
Mod Switch = Save Setting