Convair CoolTowerCTF07 User manual

(English) (CTF07)
OWNER’S MANUAL
CoolTower CTF07
®

General Safety
Please read these instructions before
using the fan and keep for future
reference.
This appliance is not intended for use by
persons (including children) with
reduced physical, sensory or mental
capabilities, or lack of experience and
knowledge, unless they have been
given supervision or instruction in using
the appliance by a person responsible
for their safety.
Children should be supervised to ensure
that they do not play with the appliance.
Do not poke anything through the
ventilating slits.
Assemble the fan completely before use.
Always use the fan in an upright position.
Stand it on a firm, solid, horizontal base
(not on thick pile carpets).
Clean the air inlets and outlets at regular
intervals to prevent airflow reduction
(refer Maintenance section).
For indoor use only. Do not use this fan
outdoors, or on wet surfaces. Do not
use the fan near flammable areas or
substances.
Electrical Safety
Before connecting your electrical power
cord to a power outlet, check that the
fan voltage is the same as your power
supply. The fan voltage will be stated on
the rating label.
Make sure that the fan never comes into
contact with water.
Never turn the fan on if the lead is
damaged or if the fan’s casing is
obviously damaged.
If the power supply cord is damaged it
must be replaced by the manufacturer, a
service agent or similarly qualified
persons in order to avoid a hazard.
Do not pull the fan along by the power
cord. Always uncoil the power cord
completely.
Always turn the fan off and unplug from
the power socket when not in use.
SEELEY INTERNATIONAL – OWNER’S MANUAL 1
SAFETY

General Safety
Please read these instructions before
using the fan and keep for future
reference.
This appliance is not intended for use by
persons (including children) with
reduced physical, sensory or mental
capabilities, or lack of experience and
knowledge, unless they have been
given supervision or instruction in using
the appliance by a person responsible
for their safety.
Children should be supervised to ensure
that they do not play with the appliance.
Do not poke anything through the
ventilating slits.
Assemble the fan completely before use.
Always use the fan in an upright position.
Stand it on a firm, solid, horizontal base
(not on thick pile carpets).
Clean the air inlets and outlets at regular
intervals to prevent airflow reduction
(refer Maintenance section).
For indoor use only. Do not use this fan
outdoors, or on wet surfaces. Do not
use the fan near flammable areas or
substances.
Electrical Safety
Before connecting your electrical power
cord to a power outlet, check that the
fan voltage is the same as your power
supply. The fan voltage will be stated on
the rating label.
Make sure that the fan never comes into
contact with water.
Never turn the fan on if the lead is
damaged or if the fan’s casing is
obviously damaged.
If the power supply cord is damaged it
must be replaced by the manufacturer, a
service agent or similarly qualified
persons in order to avoid a hazard.
Do not pull the fan along by the power
cord. Always uncoil the power cord
completely.
Always turn the fan off and unplug from
the power socket when not in use.
SEELEY INTERNATIONAL – OWNER’S MANUAL 1
SAFETY

Component List
Assembly
1 Remote Control
2 Main Body
3 Stand
4 Base Screws x3
5 Locking nut
Unpack the fan and check that you have
all of the components.
Locate the plastic locking nut and turn
the fan upside down. Assemble the
base onto the stand and lock into
position with the nut.
Note: Ensure the nut is tight to avoid
shaking of the fan.
2CTF07
ASSEMBLY
Remote Control Storage
Replacing the battery
The remote control is stored in the
remote control holder located at the top
of the rear enclosure as shown in Fig 2.
Your remote control is supplied with a
battery. To begin use, open the battery
cover and insert the battery supplied
(Fig 3). Check the polarity is correct
and replace the back cover.
When the fan’s power is on, the remote
control can be used to operate the fan
from up to 6m away. Note: if there are
two or more fans within this distance,
both will be operated by the same
remote control.
63
2
1
4
5
Operation
Modes
Insert the plug into the power outlet.
The fan is operated by a ‘touch’ screen
control panel (refer Fig. 4)
Touch the button to turn the fan
on. Select the desired fan speed (low-
med-high) by touching this button. Each
touch will cycle between the speeds.
Turn the fan OFF by touching the
button at any time.
The fan has 3 modes of operation:
Normal, Nature and Sleep. Touch the
button to cycle between these
modes.
Normal mode: The fan will work
continuously at the selected speed
setting.
Nature mode: is shown and
if set at high speed, the fan will cycle
between high, medium and low
speeds for 5 seconds each. If the
fan speed is set to medium, the fan


OPERATION
will cycle between medium and low.
If set to low, the fan will cycle
between low and off.
Sleep mode: is shown and if
set at high speed the fan will first
work at high speed nature mode for
30 min, then at medium speed
nature mode for 30 min, then
continue working at low speed
nature mode.
Touch the button on the control
panel to enable the swing function. The
control panel will display the
symbol and the fan will swing from side
to side in a 90° arc. Touch again to stop
oscillation.
Note: Do not force or hinder the
oscillation movement !

Swing Function
®
SEELEY INTERNATIONAL – OWNER’S MANUAL 3
1
2
34
MODE
OFF
SWING
ON/SPEED
Z
Z
OFF ON/SPEED MODE SWING TIMER SHIFT
FAN1 FAN2 FAN3
123
Z
Z

Component List
Assembly
1 Remote Control
2 Main Body
3 Stand
4 Base Screws x3
5 Locking nut
Unpack the fan and check that you have
all of the components.
Locate the plastic locking nut and turn
the fan upside down. Assemble the
base onto the stand and lock into
position with the nut.
Note: Ensure the nut is tight to avoid
shaking of the fan.
2CTF07
ASSEMBLY
Remote Control Storage
Replacing the battery
The remote control is stored in the
remote control holder located at the top
of the rear enclosure as shown in Fig 2.
Your remote control is supplied with a
battery. To begin use, open the battery
cover and insert the battery supplied
(Fig 3). Check the polarity is correct
and replace the back cover.
When the fan’s power is on, the remote
control can be used to operate the fan
from up to 6m away. Note: if there are
two or more fans within this distance,
both will be operated by the same
remote control.
63
2
1
4
5
Operation
Modes
Insert the plug into the power outlet.
The fan is operated by a ‘touch’ screen
control panel (refer Fig. 4)
Touch the button to turn the fan
on. Select the desired fan speed (low-
med-high) by touching this button. Each
touch will cycle between the speeds.
Turn the fan OFF by touching the
button at any time.
The fan has 3 modes of operation:
Normal, Nature and Sleep. Touch the
button to cycle between these
modes.
Normal mode: The fan will work
continuously at the selected speed
setting.
Nature mode: is shown and
if set at high speed, the fan will cycle
between high, medium and low
speeds for 5 seconds each. If the
fan speed is set to medium, the fan


OPERATION
will cycle between medium and low.
If set to low, the fan will cycle
between low and off.
Sleep mode: is shown and if
set at high speed the fan will first
work at high speed nature mode for
30 min, then at medium speed
nature mode for 30 min, then
continue working at low speed
nature mode.
Touch the button on the control
panel to enable the swing function. The
control panel will display the
symbol and the fan will swing from side
to side in a 90° arc. Touch again to stop
oscillation.
Note: Do not force or hinder the
oscillation movement !

Swing Function
®
SEELEY INTERNATIONAL – OWNER’S MANUAL 3
1
2
34
MODE
OFF
SWING
ON/SPEED
Z
Z
OFF ON/SPEED MODE SWING TIMER SHIFT
FAN1 FAN2 FAN3
123
Z
Z

Timer Function
Shift Function
The fan has a timer function that will
turn off the fan. By touching the
button 0.5 to 7.5 hour delays are
available.
The timer will count down as it
progresses - i.e. if 2 hours is set, after
30 minutes 1.5 hours will show as the
remaining time on the display. To
cancel, touch the button until
the timer indicators are no longer lit.
As well as the fan speed control, the fan
is also equipped with the ability to turn
each of the three different fans on or off.
Touch the button. “FAN1”,
“FAN2” and “FAN3” will flash on the
display for 5 seconds.
During this time, touch the , or
buttons to turn FAN1, FAN2 or
FAN3 off or on.
NOTE: if all fans are turned off, this is
the same as touching the button.
OPERATION - MAINTENANCE
SEELEY INTERNATIONAL – OWNER’S MANUAL 5
®
4CTF07
WARRANTY
As the policy of this company is one of continuous improvement, all specifications
are subject to change without notice.
Waste electrical products must not be disposed of with household
waste. This product should be taken to your local recycling centre for
safe treatment.
Maintenance
To maximise the efficiency of the fan,
clean the inlet and outlet grilles regularly.
• Unplug the fan from the mains power
supply before cleaning.
• Use a soft, damp cloth to wipe the
outside. Never use thinners or other
strong chemicals on the fan surfaces.
• Use a vacuum cleaner to remove dirt
and dust from the inlet and outlet
grilles.
• Ensure the fan is dry before plugging
back into the mains power supply.
TIMER
TIMER
TIMER
MODE SWING
SHIFT
OFF
Subject to the terms of the warranty Seeley International Pty Ltd (”Seeley”) will repair or
replace at its option, the product or any part thereof, which examination shows to be defective
for a period of 24 months from purchase.
This warranty is conditional upon the fan being used only for personal, domestic or household
purposes and installed and operated in accordance with our instructions, and does not apply
to:
For technical assistance before returning the product please contact:
!
!
!
!
!
Adjustments necessary due to misuse of the fan,
Normal user maintenance,
Setting of controls,
Transit damage, or
Damage caused by user misuse, tampering, or failure to observe the care
and special provisions in the instructions.
Our goods come with guarantees that cannot be excluded under the Australian Consumer
Law. You are entitled to a replacement or refund for a major failure and for compensation for
any other reasonably foreseeable loss or damage. You are also entitled to have the goods
repaired or replaced if the goods fail to be of acceptable quality and the failure does not
amount to a major failure.
To make a warranty claim, you will need to return the appliance along with the original
invoice/receipt to the place of purchase for assessment.
It is your responsibility to cover all forwarding and return freight costs incurred in returning the
appliance to the place of purchase, or if necessary, in sending the appliance to a service
centre.
Please complete the following for your records:
Seeley's address is 112 O'Sullivan Beach Road, Lonsdale, South Australia 5160, and the
telephone number is 08 8328 3850.
No other person, firm or corporation is authorised by us to offer or give on our behalf any other
or greater warranty than that given under this warranty. The benefits conferred by this
warranty are in favour of the original retail purchaser and any person deriving title to the goods
through or under such person and are in addition to other rights and remedies of the consumer
under a law in relation to the goods or services to which the warranty relates.
Please retain your original invoice/receipt as proof of purchase. Every request for
warranty must be accompanied by proof of purchase.
Serial Number:
Product
Model
Purchased from
Date purchased
:
...................................................................
Convair
:
: ...................................................................
...................................................................
: ....../....../...... The above warranty applies only to Australia.
CTF07
1300 650 399

Timer Function
Shift Function
The fan has a timer function that will
turn off the fan. By touching the
button 0.5 to 7.5 hour delays are
available.
The timer will count down as it
progresses - i.e. if 2 hours is set, after
30 minutes 1.5 hours will show as the
remaining time on the display. To
cancel, touch the button until
the timer indicators are no longer lit.
As well as the fan speed control, the fan
is also equipped with the ability to turn
each of the three different fans on or off.
Touch the button. “FAN1”,
“FAN2” and “FAN3” will flash on the
display for 5 seconds.
During this time, touch the , or
buttons to turn FAN1, FAN2 or
FAN3 off or on.
NOTE: if all fans are turned off, this is
the same as touching the button.
OPERATION - MAINTENANCE
SEELEY INTERNATIONAL – OWNER’S MANUAL 5
®
4CTF07
WARRANTY
As the policy of this company is one of continuous improvement, all specifications
are subject to change without notice.
Waste electrical products must not be disposed of with household
waste. This product should be taken to your local recycling centre for
safe treatment.
Maintenance
To maximise the efficiency of the fan,
clean the inlet and outlet grilles regularly.
• Unplug the fan from the mains power
supply before cleaning.
• Use a soft, damp cloth to wipe the
outside. Never use thinners or other
strong chemicals on the fan surfaces.
• Use a vacuum cleaner to remove dirt
and dust from the inlet and outlet
grilles.
• Ensure the fan is dry before plugging
back into the mains power supply.
TIMER
TIMER
TIMER
MODE SWING
SHIFT
OFF
Subject to the terms of the warranty Seeley International Pty Ltd (”Seeley”) will repair or
replace at its option, the product or any part thereof, which examination shows to be defective
for a period of 24 months from purchase.
This warranty is conditional upon the fan being used only for personal, domestic or household
purposes and installed and operated in accordance with our instructions, and does not apply
to:
For technical assistance before returning the product please contact:
!
!
!
!
!
Adjustments necessary due to misuse of the fan,
Normal user maintenance,
Setting of controls,
Transit damage, or
Damage caused by user misuse, tampering, or failure to observe the care
and special provisions in the instructions.
Our goods come with guarantees that cannot be excluded under the Australian Consumer
Law. You are entitled to a replacement or refund for a major failure and for compensation for
any other reasonably foreseeable loss or damage. You are also entitled to have the goods
repaired or replaced if the goods fail to be of acceptable quality and the failure does not
amount to a major failure.
To make a warranty claim, you will need to return the appliance along with the original
invoice/receipt to the place of purchase for assessment.
It is your responsibility to cover all forwarding and return freight costs incurred in returning the
appliance to the place of purchase, or if necessary, in sending the appliance to a service
centre.
Please complete the following for your records:
Seeley's address is 112 O'Sullivan Beach Road, Lonsdale, South Australia 5160, and the
telephone number is 08 8328 3850.
No other person, firm or corporation is authorised by us to offer or give on our behalf any other
or greater warranty than that given under this warranty. The benefits conferred by this
warranty are in favour of the original retail purchaser and any person deriving title to the goods
through or under such person and are in addition to other rights and remedies of the consumer
under a law in relation to the goods or services to which the warranty relates.
Please retain your original invoice/receipt as proof of purchase. Every request for
warranty must be accompanied by proof of purchase.
Serial Number:
Product
Model
Purchased from
Date purchased
:
...................................................................
Convair
:
: ...................................................................
...................................................................
: ....../....../...... The above warranty applies only to Australia.
CTF07
1300 650 399

00140101-D convair.net.au AU 1112
Warranty Service
Australia 1-300-650-399
seeleyinternational.com
It is the policy of Seeley International to introduce continual
product improvement. Accordingly, specifications are
subject to change without notice. Please consult with your
dealer to confirm the specifications of the model selected.
®