Convenient Height S User manual

CONVENIENT HEIGHT®
The Convenient Height®product Model S two-piece toilet
Two-Piece Toilet Assembly and Installation Notes
● Assemble this product according to the two-piece toilet plumbing guide
● Install this product according to the two-piece toilet plumbing guide
● Product does not include a supply line, as the length needed varies per
installation
● Professional and licensed plumber two-piece toilet assembly and installation
required to activate product warranty
HOW TO REMOVE OLD TOILETWHEN REPLACING
STANDARD TOILET WITH THE CONVENIENT HEIGHT®
a. Close toilet supply valve and flush tank completely. Towel or sponge remaining
water from tank and bowl. b. Disconnect and remove supply line. NOTE: If replacing
valve, first shut off main water supply; c. Remove old mounting hardware, remove
toilet and plug floor waste opening to prevent escaping sewer gases. d. Remove
closet bolts from flange and clean away old wax, putty, etc. from base area.
NOTE: Mounting surface must be clean and level before new toilet is installed
CARE AND CLEANING THE CONVENIENT HEIGHT®
When cleaning your toilet, wash it with mild, soapy water, rinse thoroughly with clear
water and dry with a soft cloth. WARNING: Do not use in-tank cleaners. These
products can seriously corrode fittings in the tank. This damage can cause leakage
and property damage. Convenient Height Company shall not be responsible or liable
for any damage caused by the use of in-tank cleaners.
Convenient Company LLC. Website: convenientheight.com. Customer service phone: [phone]
Convenient Height product Model S Toilet Specification Sheet and Installation Guide Page: 4

CONVENIENT HEIGHT®
The Convenient Height®product Model S two-piece toilet
When assembling a dual flush valve
Assemble this product according to the two-piece toilet installation and plumbing guide
Install this product according to the two-piece toilet installation and plumbing guide
Tank part installation notes: Filler Valve
Dual flush filler valve has a water level adjusting option
IF WATER LEVEL IS TOO LOW
Turn the tank water level adjustment screw clockwise to raise the float. Flush to reset
water level.
IF WATER LEVEL IS TOO HIGH
Turn the water level adjustment screw counterclockwise to lower the float. Flush to
reset water level.
Convenient Company LLC. Website: convenientheight.com. Customer service phone: [phone]
Convenient Height product Model S Toilet Specification Sheet and Installation Guide Page: 5

CONVENIENT HEIGHT®
The Convenient Height®product Model S two-piece toilet
Tank parts installation notes
Drawings as shown in this specification sheet is a visual guide are for reference
purposes only and may differ from the actual part color, shape and dimensional size.
Function performed by all parts illustrated is the same or similar. Professional and
licensed plumber two piece toilet assembly and installation required
TANK FLUSH PART REPLACEMENT INFORMATION
If needed, Model S tank dual flush parts can be replaced with Fluidmaster® brand dual
flush valves or similar dual flush mechanisms available at retailers nationwide.
Fluidmaster® is a registered trademark of Fluidmaster, Inc.
Convenient Company LLC. Website: convenientheight.com. Customer service phone: [phone]
Convenient Height product Model S Toilet Specification Sheet and Installation Guide Page: 6

CONVENIENT HEIGHT®
The Convenient Height®product Model S two-piece toilet
Convenient Company LLC. Website: convenientheight.com. Customer service phone: [phone]
Convenient Height product Model S Toilet Specification Sheet and Installation Guide Page: 7

CONVENIENT HEIGHT®
Product: Model S 20” bowl height two-piece elongated toilet 
How to measure a toilet rough-in



Model S Rough-in: 12 inches
Measure from wall behind toilet to the center of floor bolts (bolts that hold the toilet
down). Compare this measurement to the Model S rough-in of 12 inches. If the
rough-in at your toilet is equal or longer than 12 inches then our toilet will fit onto your
current toilet drain easily.
Convenient Company LLC. Website: convenientheight.com. Customer service phone: [phone]
Convenient Height product Model S Toilet Specification Sheet and Installation Guide Page: 8

CONVENIENT HEIGHT®
Product: Model S 20” bowl height two-piece elongated toilet 

When all parts are installed as required
FLUSH THE TOILET
If you’re satisfied with the flush,
YOU’RE DONE
Thank you for purchasing the Convenient Height Company product
Let’s Rise Above the Standard Height.™
Convenient Company LLC. Website: convenientheight.com. Customer service phone: [phone]
Convenient Height product Model S Toilet Specification Sheet and Installation Guide Page: 9