Cool music BP40 User manual

R
CHANGE LIFE WITH MUSIC
BP40
Battery Powered Guitar Amplifier
OWNER’S MANUAL
深圳市酷乐科技有限公司
SHENZHEN COOLMUSIC TECH CO.,LTD
www.coolmusic-tech.com.cn
www.coolmusic-tech.com

4 1
1. When the speaker is not in use for a long time, charge it once every 6 months to prevent
the speaker from being in a dead state for a long time and damaging the battery.
2. When the speaker is not used for a long time, charge it once every 6 months to fully
charge it.
3. Please choose a DC, 18V, 3A adapter to charge the speaker (the adapter came with is
DC 18V 3A)
4. Do not use AC adapter to charge directly, please charge it using the adapter provided by
the manufacturer.
5. DI OUT jack can be connected to another speaker
6. We offer 1-year warranty, according to the time the customer receives the speake. (There
is currently no specific place to register the warranty)
WARNING
WELCOME!
Thank you for choosing to use BP40 battery powered guitar amplifier,
After years of sound tests and explorations, our engineers and musicians
finally developed the characteristics and advantages BP40 . So we ensure
that the amp will send out most beautiful voice for a variety of keyboards,
acoustic guitar, microphone and other musical instruments.
Volume, bass and treble can be adjusted quickly and rechargeable
lithium-ion batteries are built into this amp, which give it 5-10 hour of
playing time. Maintained for 5-10 hour of working state after every charging.
The handy USB port also allows you to charge your other devices when
you’re on the go.
Q&As
Technical Parameters
1. Can not turn on the amp
Battery was dead; Try to connect the adapter and chek if the adapter indicator light works
properly.
2. U disk can not record
Pls make sure the capacity of your U disk less than 32 GB;
The format of your U disk is incorrect, pls choose the U disk of FAT32.
3. Can not connect Bluetooth
Pls check wether the bluetooth trun on;
If the indicator light is always on after flashing, the bluetooth has been connected by other
device;
Try another phone to connect it.
4. Battery problem
If the batteries dead for a long time, the batteries will be damaged.
The amp can use for 5-10 hours after full charged. The batteries can be changed, but you
have to ask professional to do it.
5. No sound on the amp
Pls check the volume on, then pls the the adapter and the battery works normally.
6. Lound white noise
Pls pull all of the equipment out, incluing all of the musical instruments and adapter, if the
issue can't be solve, pls contact the seller.
Rated : 40W
Woofer: 8.0 inches
Tweeter: 1.5 inches
6.0KG
18V/3A
20 - 20kHz
Rated power
Model
The horn
weight
adapter
Frequency range
BP 40-
Lithium battery pack
4*18650 lithium battery + battery protection plate
Voltage :14.8V Battery capacity :2600MA

2 3
Phone In
Schematic diagram of interface
USB input:The jack can read storage devices such as USB
flash drive(Insert U disk automatically switch to MP3 mode)
Indicator light:
1.Bluetooth waiting for connection:Indicator Light blue flashing;
2.Insert U disk / Bluetooth Connect to the mobile phone:Indicator
light is normally on blue;
3.Single cycle:Indicator light is normally on purple.
Mode button:
1.single press:Pause / play
2.Long press:Bluetooth Open / close(No insert U disk)
3.Long press:switch Bluetooth / MP3(insert U disk)
single press:Next song
Long press:volume increase
single press:Previous song
Long press: volume discrease
Aux IN:Mobile
phones or MP3 input
Reverb:Timbre modification Mode switching:Mp3/Bluetooth
Bass: Low frequency signal control Treble:middle High frequency signal control
Power indicator:
1.Non-charging state:Display blue when power is enough; display purple when power
is low;
2.charging state:Purple light blinks during charging, turns to purple light(stop blink)
after full-charged.
Recording button ( this button is invalid when there is no U Disk inserted)
How to turn on Recording Function?
1. Insert the U disk, click to start recording (the indicator light flashes red), click again to end
the recording and play this recording (click again to start a new recording);
2. When playing a recording: double-click the recording button to delete the currently playing
recording file, and long-press the recording button to switch between sequential play/single
cycle (the indicator light is always on in purple during single cycle).
LINE 1 LINE 2 LINE 1 & LINE 2 LINE 3
Channel 2
Gain
Channel 3
Channel 3
Bass
Channel 3
Reverb
Channel 2
Channel 1/2
Reverb
Channel 3
Gain
Channel 3
Treble Master Vol
Phone In
How to turn on Bluetooth Function and connect with your devices?
1. Turn on the amplifier.
2. Long press the MODE button and turn on Bluetooth MODE.
3. Turn on the Bluetooth function of your device and choose the device with the name of coolmusic
(Support recording software such as Douyin, Kugou, Kuaishou, National K Song, Sing Bar, etc.)
Channel 1
Channel 1
Gain
Battery Status: Blue light indicates battery is fully charged, and red light indicates low
battery, requires charging.Charging Indicator: When the purple light is flashing, is charging,
and when it's fully charged the lights stay steady purple.
POWER:power control,the associated power indicator
D.I out:listen port
Phones:headset output
18V DC input:Connect the output of adapter
9V DC output:The 9 v voltage supply to other equipment
BP40
40
40
CAUTION AVIS
18V DC
input
9V DC
output
POWER D.I Phones
Built-in MP3, Bluetooth and Record
Light weight and small size
Amazing sound and great look
Pretty versatile and capable
Schematic diagram of interface