Peavey 810 TX User manual

810TM TX
Bass Enclosure
SPECIFICATIONS
Frequency Response, 1 meter
on-axis, swept sine in anechoic
environment:
25Hz-15kHz
Power Handling:
400 W continuous (40 V RMS)
800 W program
Transducer Complement:
Eight 10” KevlaKB impregnated woofers
One phenolic dome horn tweeter
Box Tuning Frequency:
35 Hz
Crossover Frequency:
3.5 kHz
Impedance, Z:
4 ohms nominal
3.8 ohms minimum
Input Connections:
One l/4” phone jack
Enclosure Materials & Finish:
3/4” plywood, carpet covered with metal
corners and an expanded metal grille
Dimensions (H x W x D):
49” x 24.5” x 17.25”
(124.5 cm x 62.2 cm x 43.8 cm)
Net Weight:
148 Ibs. (67.3 kg)
DESCRIPTION
The 81 OTM TX is the newest, biggest,
and badest bass box from Peavey. New
IO” drivers were developed specifically
for the 810 TX. To decrease unwanted
distortion, KevlarB impregnated cones
were used in these drivers. Increased
low frequency output is accomplished
by a substantial vent at the bottom of
the enclosure. The upper harmonics
needed to accurately reproduce sharp,
tight transients are handled by a horn
loaded tweeter. An automatic resetting be custom tailored to any style of
protection device has been placed in playing or particular sound.
the signal path of the tweeter. Should The 810 TX is a 4 ohm enclosure
too much power start going to the
tweeter this protection device will trip capable of handling up to 800 watts.
resulting in almost no output from the
tweeter. As soon as the power level of
the high frequencies returns to a
nominal level, the device will reset itself
and output from the tweeter will return.
An L-pad attenuator has also been
designed into the crossover so that the
amount of high frequency content can