Cooper Lighting Square Straight Steel SSS User manual

172 STREETWORKS Outdoor Lighting Solutions Cooper Lighting
10'—39' MOUNTING HEIGHT
SSS SQUARE STRAIGHT STEEL
POLES
1...ASTM Grade steel base plate with ASTM A366 base cover.
2...Hand hole assembly 3" x 5" on 5" and 6" pole; and 2" x 4"
on 4" pole.
3...ASTM A500 grade “B” steel shaft. Shot blasted and
painted with polyester powder coat.
4...Drilled or Tenon (specify).
5...Anchor bolt per ASTM A576 with (2) nuts, (2) flat washer,
and (1) lock washer. Nuts, washers and threaded portion
of bolt are hot dip galvanized. 3" hook for 3/4" bolt.
4" hook for 1" bolt.
SPECIFICATION FEATURES
FOUR BOLT ANCHORAGE [See ordering information]
BC=Bolt Circle
BP=Bolt Projection
AB=Bolt Dimensions
D=Bolt Diameter
H=Bolt Dimensions
FINISH COLORS [See ordering information]
F=Dark Bronze
G=Galvanized
V=Grey
W=White
Y=Black
Base View
handhole
12 5/16 "
MH
(mounting height)
S
B
AB
BP
BC
H
D
1
5
2
3
4
WARNING: THE USE OF UNAUTHORIZED ACCESSORIES SUCH AS BANNERS, SIGNS OR PENNANTS FOR WHICH THE POLE WAS NOT DESIGNED FOR VOIDS THE COOPER LIGHTING
WARRANTY AND MAY RESULT IN POLE FAILURE CAUSING SERIOUS INJURY OR PROPERTY DAMAGE. COOPER LIGHTING'S POLE WARRANTY IS ALSO VOIDED IF
LUMINAIRE IS NOT INSTALLED AT TIME OF POLE INSTALLATION.

STREETWORKS Outdoor Lighting Solutions 173Cooper Lighting
SQUARE STRAIGHT STEEL POLES
Mounting Fixture No. & Accessories
Shaft 3Wall Height Base Mounting Location Arm (Ground
Square Straight Steel Size Thickness (ft.) Type Finish & Type of Arms Lengths Lug)
SS S5 A 20 SFM 1 XG
Bolt Anchor
Base Circle Bolt Shaft Bolt Net. Max. Fixture
Mtg. Catalog1, 2 Wall Square Dia. Proj. Size Dia. &. Wt. EPA (Sq. Ft.)4EPA (Sq. Ft.)4Load—Include
Height Number Thickness (In.) (In.) (In.) (In.) Length (In.) (Lbs.) At Pole Top 2' Above Pole Top Bracket (Lbs.)
MH S BC BP B AB 70 80 90 100 70 80 90 100
10 SSS4A10SF .120 10 1/2 11.0 4 1/2 4 3/4 x 25 x 3 96 39.8 29.9 23.2 18.4 33.0 24.8 19.3 15.3 150
15 SSS4A15SF .120 10 1/2 11.0 4 1/2 4 3/4 x 25 x 3 133 19.6 14.4 10.8 8.2 17.2 12.7 9.5 7.3 150
20 SSS4A20SF .120 10 1/2 11.0 4 1/2 4 3/4 x 25 x 3 152 12.9 9.1 6.5 4.6 11.7 8.2 5.9 4.2 200
25 SSS4A25SF .120 10 1/2 11.0 4 1/2 4 3/4 x 25 x 3 208 8.7 5.6 3.6 2.1 8.0 5.2 3.3 2.0 200
20 SSS5A20SF .120 10 1/2 11.0 4 1/2 5 3/4 x 25 x 3 202 21.9 15.7 11.6 8.5 19.9 14.3 10.5 7.7 200
25 SSS5A25SF .120 10 1/2 11.0 4 1/2 5 3/4 x 25 x 3 248 15.5 10.5 7.2 4.8 14.3 9.8 6.6 4.4 200
30 SSS5A30SF .120 10 1/2 11.0 4 1/2 5 3/4 x 25 x 3 293 8.2 4.6 2.1 -- 7.7 4.3 2.0 -- 300
35 SSS5M35SF .188 10 1/2 11.0 4 1/2 5 3/4 x 25 x 3 480 11.8 7.1 3.8 1.5 11.1 6.6 3.6 1.4 300
25 SSS6A25SF .120 12 1/2 12.5 5 6 1 x 36 x 4 295 24.1 16.8 12.0 8.5 22.2 15.6 11.1 7.8 200
30 SSS6A30SF .120 12 1/2 12.5 5 6 1 x 36 x 4 347 14.0 8.7 5.0 2.5 13.1 8.2 4.7 2.3 300
30 SSS6M30SF .188 12 1/2 12.5 5 6 1 x 36 x 4 505 26.4 18.1 12.5 8.4 24.7 16.9 11.6 7.9 300
35 SSS6M35SF .188 12 1/2 12.5 5 6 1 x 36 x 4 584 19.7 12.7 7.9 4.4 18.6 12.0 7.5 4.2 300
35 SSS6X35SF .250 12 1/2 12.5 5 6 1 x 36 x 4 696 28.9 19.7 13.4 8.9 8.7 18.6 12.7 8.4 300
39 SSS6M39SF .188 12 1/2 12.5 5 6 1 x 36 x 4 647 15.4 9.1 4.8 1.8 14.6 8.7 4.6 1.7 300
39 SSS6X39SF .250 12 1/2 12.5 5 6 1 x 36 x 4 822 23.5 15.4 9.8 5.7 22.4 14.6 9.3 5.4 300
NOTES: 1 Catalog number includes pole with anchor bolts with double nuts (BEFORE INSTALLING ANCHOR BOLTS MAKE SURE PROPER ANCHOR BOLT TEMPLATE IS OBTAINED FROM COOPER LIGHTING).
2 Tenon size or machining for rectangular arms must be specified. Hand hole is located 180° from single arm.
3 Shaft size, base plate, anchor bolts and projections may vary slightly—all dimensions nominal.
4 EPA’s based on shaft properties with wind normal to flat. EPA’s calculated using base wind velocity as indicated plus 30% gust factor.
MACHINING FOR RECTANGULAR ARMS [Add as suffix]
Designation Designation Designation Quantity
Letter & Number Letter & Number Letter & Number & Location
M1 E1 Z1 Single
M2 E2 Z2 2 @ 180°
M3 E3 Z3 3 @ 120°
M4 E4 Z4 4 @ 90°
M5 E5 Z5 2 @ 90°
M6 E6 Z6 3 @ 90°
M7 E7 Z7 2 @ 120°
NOTES: Refer to Fixture Drilling Options on page 160.
ACCESSORIES
A=1/2" tapped hub1
B=3/4" tapped hub1
C=Convenience outlet2
G=Grounding lug (max. wire #8 AWG)
H=Additional hand hole and cover—
12" below pole top—90° from hand hole.
NOTES: 1 Location is 3' above base–90° from hand hole.
2 Outlet is located 4' above base and on same side of pole
as hand hole, unless specified otherwise. Receptacle not
included, provision only.
MOUNTING OPTIONS [Add as suffix]
Fixed Tenon Designation O.D. Length
Number (In.) (In.)
1 2 3/8 3 1/2
2 2 3/8 4
3 3 1/2 5
934
7/8''
2 13/16'' 3/4'' dia.
hole
(2) 3/8"
dia. holes
3 7/8''
DRILLING PATTERN
Type “M” [RCL, Landau, Galleria and Vision] Type “E” [Concourse III] Type “Z” [Credenza and Cirrus]
3/4'' dia.
hole
(2) 5/8''
dia. holes
2 7/16''
2 5/16''
4 7/8''
O.D.
LENGTH
9/16" [14mm]
dia. hole (3)
4 7/8" [124mm]
4" [102mm]
2 7/16" [62mm]
ORDERING INFORMATION
SAMPLE NUMBER: SSS5A20SFM1XG
NOTE: Specifications and dimensions subject to change without notice.