COP Security 15-AU50ES User manual

Speed Dome Camera Controller
Operation Manual
VER:1.1
Pleasereadthisoperationmanualbeforeusingthisdevice andusethedevice properly.
Also, pleasekeepthismanualwithcaretoensureeasyaccess atanytime.

1
INDEX
Summary---------------------------------------------------------------------------------------1
èIntroductionoftheKeyboardPanel -------------------------------------------------------1
TheSketchoftheFrontPaneland DescriptionofButtons--------------------------------1
RearPanel-------------------------------------------------------------------------------------3
SelectProtocoloftheKeyboard-----------------------------------------------------------4
OperationoftheKeyboard-----------------------------------------------------------------4
InstallationandConnection----------------------------------------------------------------7
TechnicalSpecifications ---------------------------------------------------------------------8
Points forAttention--------------------------------------------------------------------------8
PackingList------------------------------------------------------------------------------------8

2
Summary
Thekeyboardcontrollerisusedforterminalreceiverssuchastheintelligentspeeddomeetc.
Itisveryeasyforoperating and setting thespeeddomecamera. Thecontrollerisalsotocontrolthe
terminalreceivertoachievethefunction ofcontrolling pan/tilt, lensand etc.
Taking theEIA/RS-485 electricalinterfacebetweenthekeyboardand thereceiver.
onekeyboardcancontrolasmuchas128 speeddome.
themaximumcommunication distancebetweenthekeyboardand thereceiver isup to1.2km.
èIntroductionofthekeyboardPanel
TheSketchoftheFrontPaneland DescriptionofButtons(Figure1)
Figure1
1、LCD
2、AUTO: Tocontrolauto-horizontalrotationforPan/Tilt.
3、LENSCTRLSWITCH :Toselectthefollowingfunction èIRIS/FOCUS/ZOOM
4、IRISOPEN/FOCUSNEAR /ZOOMWIDE: toexecutethefunctionwhich [LENSCTRL
SWITCH]selected, thereisthree function èIRISOPEN/FOCUSNEAR/ZOOMWIDE

3
5、IRISCLOSE/FOCUSFAR /ZOOMTELE: toexecutethefunctionwhich [LENSCTRL
SWITCH]selected, thereisthree function:irisclose, focusfar, zoomtele.
6、ON：Switchonthesettingoffunction.
7、OFF：Switchoffthesettingoffunction.
8、SHOT：Tocall cruisingtrack.
9、CAM/ID：Selectaddress oftheintelligentSpeedDome.
10、CLEAR：Toclearinputteddata.
11、0-9：Numberkey.
12、Enter：Toconfirm.
13、CALL：To call thepresetposition.
14、PRESET：Tosetthepresetposition.
15、JOYSTICK：controltheupward, downward, leftwardandrightwardspeedmotionofthe
speeddome.
16、PowerLED
RearPanel(Figure2)
Figure2
1、Powerinputconnector:inputDC12Vpower.
2、Communication connectorRS485:twisted-pair.

4
SelectProtocoloftheKeyboard
1. ProtocolSetting press [CALL]+[200]+[ON], LCDwill showDisplay:SelectProtocol ”, and turnthe
joystickleftorrighttoselecttheprotocolyou wanted, press [Enter] tosavetheprotocol.
2．Protocoltype
PELCO-D2400bpsPELCO-D4800bps
PELCO-P4800bpsPELCO-D9600bps
PELCO-P9600bps
COP-29600bps
OperationoftheKeyboard
1. SelectAddress oftheSpeedDomeCamera [CAM]+[N]+[Enter]
Display:CurrentCamID 001
Description N –– No. ofcamerafrom0 to255
Function Selecttheaddress ofthecameratobecontrolled.WhenthevalueNisinconformitywiththe
address oftheSpeedDomeCamera, it will beundercontrol.
2. SetthePresetPosition [PRESET]+[N]+[Enter]
Display PresetNo 001
Description N –– No. ofpresetposition from1 to255.
Function Storecurrentposition and referit asNo. Nposition.
3. Call thePresetPosition [CALL]+[N]+[Enter]
Display Call Number 001
Description: N –– No. ofpresetposition from1 to255.
Function Transferthecameratotheposition ofNo. Npresetposition.
4. CancelthePresetPosition:[PRESET]+[N]+[OFF]
Display PresetNo 001
Description N –– No. ofpresetposition from1 to255.
Function DeletetheNo. Npresetposition stored.
5. SettheCruiseTrack(COP-2, PELCO-D, PELCO-PAvailable)
EntertheStatusofTrackSetting [SHOT]+[N]+ [ON](N No. oftrackfrom1 to6).
Display Track=01 Sum=06
Description TrackNo.1 iscurrentlysetting, inwhichthereare6 presetpoints.
Edit Track Press [TELE] toedit downpageandpress [WIDE] toedit uppage. Eachtrackinvolves16 preset
pointsand therunning speedand thedwelling timeofeachpresetposition.
Display No. 01 Point 001 →Description The1stpresetposition inthetrackis001.
Display No. 01 Speed 001 →Description Thespeedofthe1stpresetpointinthetrackisthe1stclass.
Display No. 01 Time 004 →Description Thedwellingtimeofthe1stpresetpointinthetrackis4
Seconds
SpeedRange 1 to8 fromthefastesttothelowest.Any speedoutsidetherangewill bereferredasthe1st

5
class;therangeofthedwelling timeis 1 to255.
WhentheNo. NpresetpointissetasNo. 0, thenall presetpointsbeforetheNo. Npresetpointinthetrack
will bevalidhoweverall numbersofpresetpointsafterwardand theirspeedand dwelling timeshall besetas
0 automatically.
Aftertracksareedited, press OFF tostoreand exit whilepushthejoysticktoexit withoutstorage.
6. Run CruiseTrack:[SHOT]+[N]+ [Enter]
Display InputTourNo 01
Description N –– No. ofthetrackfrom1 to6.
Function TourtheNo. Ntrackand stop tourbypushing thejoystick.
7. Stop CruiseTrack:[SHOT]+[N]+ [OFF]
Display InputTourNo 01
Description N –– No. ofthetrackfrom1 to6.
Function Stop theNo. Ntrackorstop tourbypushing thejoystick.
8. CancelCruiseTrack: [SHOT]+[N]+ [OFF](Pressing [OFF]downuntil ClearTourOK ”appears)
Display InputTourNo 01
Description N –– No. ofthetrackfrom1 to6.
Function DeletetheNo. Ntrack
9. AutoPanON (Operation ofCOP-2 Protocol): [AUTO]+[P1]+[ON]+[P2]+[OFF]
Display Input1stNo 001
Description P1–––– thestarting scanNo. ofpresetpointfrom1 to255, whichshouldbesetalready.
Display Input2nd No 002
Description P2–––– theending scanNo. ofpresetpointfrom1 to255, whichshouldbesetalready.
If P1 =P2 orP1 and P2 arecoincided, thespeeddomewill makescaninrangeof360°.
Note:
(1)ForPELCO-Dand PELCO-PProtocolsthewayofoperation isasfollows:
SettheStarting ScanPosition:Transferthespeeddometothestarting scanposition, operation
[AUTO]+[ON]
SettheEnding ScanPosition:Transferthespeeddometotheending scanposition, operation
[AUTO]+[OFF]
Run AutoPan [AUTO]+[ENTER]
(2)AutoPanoperation takesthefollowing parameters.You mustsettheseparametersbeforeusing a
AutoPancommand tobeginthescanoperation.You canusethescanStop command orPTscanstop
command tostop thescan. Setting scancondition:
AutoPanPosition(Firstspecifyposition, second specifyposition)
AutoPanSpeedand Direction.
10. Stop AutoPan [AUTO]+[OFF] (onlyfor COP-2 protocol)orpushthejoysticktostop scan.

6
11. ControltheZoomoftheCamera firstly, press [LENSCTRLSWITCH], you cansee LensZoomCTRL”showed
on theLCD, secondly, press [ZOOMWIDE]/[ZOOMTELE] toexecutethefunction.
12. ControltheFocusoftheCamera firstly, press [LENSCTRLSWITCH], you cansee LensFocusCTRL”showed
on theLCD, secondly, press[FOCUSFAR]/[FOCUSNEAR] toexecutethefunction.
13. ControltheIrisoftheCamera firstly, press [LENSCTRLSWITCH], you cansee LensIrisCTRL”showedon
theLCD, secondly, press[IRISOPEN]/[IRISCLOSE] toexecutethefunction.
14. ControltheVibration Correction oftheCamera [ON]/[OFF]
15. BackLightofKeyboardScreen [CALL]+ [5]+ [ON]/[CALL]+ [5]+ [OFF]
16. Version numberdisplay [CALL]+ [211]+[ENTER]
17. UsetheJoysticktocontrolthespeeddomecamera
You canusethespeedjoysticktocontrolthePan/Tilt direction and speedofthespeeddomerandomly.Thespeed
ofpan/tilt isdecidedbytheangleofthejoystickyou operated(Figure3).
Changethetilting angleofthejoystickyou canadjustthespeedevenlyand thecameracanbefocused
automaticallyinthecourseofscantokeepimagesbeing distinct.
Figure3
18. Incaseerroroperation occurs, normaldisplaywill berecoveredafter ErrorOperation”appearsfor1 second.

7
InstallationandConnection:
Attention Pleasereadtheoperationmanualofthekeyboardandthespeeddomecarefullybeforeconnectingwires.
Any incorrectconnectionscancausepermanentdamageofthedevice.Whenconnecting wires, firstswitchoffthe
powersupplyofall devices.Thecommunication wiresbetweendevicesshouldbeshieldedtwistedcable.When
installing cablestheyshouldbefarawayfromhigh voltagelinesorotherpossibleinterference circuitsascanas
possible.
1. Themarking ofwiresofthetransferbox (Figure4)
2. Connectionsofthekeyboardcontrollercontrolling multiplespeeddomecameras(Figure5)
3. Connectionsbetweenthekeyboardand thespeeddomecamera(Figure6)
RED
BLACK GREEN
YELLOW
REDㄩRS485+
BLACKㄩRS485-
GREENㄩGND
YELLOWㄩRS232 OUT
Figure4
(Figure

8
TechnicalSpecifications
Communication betweenSpeedDomeCameraand Controller Porttomulti-portand halfduplex function.
Communication connector:RS-485.
Baud RateofCommunication Fourbaud ratesi.e. 2400bps, 4800bpsand 9600bps.
Distance ofCommunication 1200minmaximum
PowerSupply DC12±1V/1A;
Size 130 (L)×190(W)×64(H)（mm）
Weight 525 g
Numberofcontrolledspeeddomecameraup to128.
Points forAttention
Pleasereadtheoperation manualofthekeyboardcarefullybeforeusing it.
ThekeyboardtakesDC12Vpowersupply. Pleaseconfirmthevoltageand polaritybeforethepowersupplyis
switchedon.
Donotplace thekeyboardundertherainoron wetplace soastoavoidshortcircuit orelectricalshock.
Asthekeyboardisasophisticatedelectronicdevice, you shouldneveropenthecasesoastoavoidthe
occurrence oftrouble.
Thekeyboardhasintegratedmultipleprotocols, and you arepleasedtoselectcorrectprotocoland thebaud rate.
Whenswitching on powersupply, takecareoftheselectedprotocoland thebaud rateon thefirstscreen.
Packing List
KeyboardController1
PowersupplyDC12V1
RJ45 Cable1