CORAB 7C User manual

HOW TO CONNECT THE
CÔR®7C THERMOSTAT*TO YOUR WI-FI®
NETWORK AND MOBILE APP
User’s How-To Guide
CONNECTING THE CÔR®7C TO YOUR MOBILE APP con’t
*Firmware 2.11 or Higher

Simple Wi-Fi®Setup Using Your Smartphone
After your Côr®7C Thermostat is installed and set up by
your dealer, you can connect the thermostat to your Wi-Fi
network to control your home’s comfort from anywhere
with the free mobile app. This is a simple process and
will only take a few minutes using your iOS or Android™
phone. Download the Côr Smart Home app from Google
Play or the iPhone App Store.
Check thermostat firmware:
Start > Menu > Settings > About > SW Version
Open the Côr Smart Home App on Your Phone:
1. Sign in or Sign up for an account if you don’t have an account.
2. After signing in, tap on ADD a device.
3. Check your thermostat firmware, if 2.11 or higher,
select YES.
4. Was your thermostat setup by your dealer?
Select YES if it was installed by your dealer.
5. Is your thermostat connected to Wi-Fi, select NO.
6. The app will guide you through the process to get
a list of local networks for your thermostat.
A
B
CONNECTING THE CÔR®7C TO YOUR WI-FI®NETWORK
1
On the Thermostat:
Select your network:
1. Tap START and press for five seconds
and wait till the thermostat screen shows
AP ACTIVE.

Link Your Account on App to Thermostat
1. Read and accept the Terms & Conditions
agreement. Tap NEXT.
2. Compare the six-character PIN on the mobile
app and thermostat.
3. If the PINs are the same, tap NEXT
on THERMOSTAT.
4. Select a name for your thermostat and
tap NEXT.
5. Update the home profile and tap NEXT.
6. Update the home address and tap NEXT.
7. Congratulations, you can now control your
thermostat remotely through the Côr mobile app.
D
Mobile App Instruction for iPhone:
1. Tap iPhone settings, go to Wi-Fi®settings
and select Côr 7 network.
2. Once successful, go back to mobile app.
3. Select I’m connected.
4. Once connected to the thermostat network,
the mobile app will display a list of local
Wi-Fi networks, select the home network.
Touch NEXT.
5. Enter your home router’s password and
select Connect Thermostat to Wi-Fi.
Mobile App Instruction for Android™:
1. Touch SEE LOCAL NETWORKS and select
the Côr 7C thermostat.
2. Once successful, go back to the mobile app.
3. Select your network and touch NEXT.
4. Enter your home router’s password and select Connect Thermostat to Wi-Fi.
YOUR THERMOSTAT SHOULD NOW BE CONNECTED TO WI-FI.
C2
C1
CONNECTING THE CÔR®7C TO YOUR WI-FI®NETWORK
CONNECTING THE CÔR 7C TO YOUR MOBILE APP
2

Link Account When Thermostat Is Already Connected to Wi-Fi®
1. Sign in or Sign up for an account if you don’t have an account.
2. After signing in, tap on ADD A DEVICE.
3. Check your thermostat firmware, if 2.11 or higher, select YES.
4. Was your thermostat setup by your dealer?
Select YES if it was installed by your dealer.
5. Is your thermostat connected to Wi-Fi? Select YES.
6. Read and accept the Terms & Conditions agreement.
Tap NEXT.
7. Tap Start and then press for five seconds
on the thermostat to get a six-character PIN.
8. Look at the PIN on your thermostat and enter
the PIN on app. Tap LINK.
9. Select a name for your thermostat and tap NEXT.
10. Update the home profile and tap NEXT.
11. Update the home address and tap NEXT.
12. Congratulations, you can now control your
thermostat remotely through the Côr mobile app.
YOUR THERMOSTAT SHOULD NOW BE CONNECTED TO THE MOBILE APP.
©2018 Côr™Home Automation 10/2018.
Wi-Fi®is a registered trademark of the Wi-Fi Alliance Corporation.
Android and Google Play are trademarks of Google Inc.
Apple and iOS are trademarks of Apple Inc., registered in the U.S. and other countries.
App Store is a service mark of Apple Inc.
CONNECTING THE CÔR®7C TO YOUR MOBILE APP con’t
For further information, please contact:
mycorhome.com
(844) My-Cor-Home or [phone]
E
8