Corpus.e Feetbox Evo User manual

Feetbox®Evo
22/09/2020 Feetbox® Evo Installation - V1.0 1
Installation Manual

22/09/2020 Feetbox Evo Installation - V1.0 2
Installation Manual
Important information
These following operations has te be done by trained people.
The installation of the FeetboxEvo should be made on clear and flat area.
Two people are are required for this operation
The electrical grid has to be in accordance with the marking plate at the back of the machine and the current legislation
Do not connect the Feetbox Evo to the electrical grid if one of the step below is not properly completed

22/09/2020 Feetbox Evo Installation - V1.0 3
Pressure Platform
Frame
PC
Screws and tools
Supply cable
Installation Manual
Pack content
Box and Foams as to be kept

22/09/2020 Feetbox Evo Installation - V1.0 4
A/ Take the 4 screws and the Hex keys from the « Screws
and tool » SIDAS bag delivered in the box
Installation Manual
1 –Assembly of the computer mounting plate
B/ The computer mounting plate is fixed under the frame
- Unscrew the 4 wings nuts
- remove the mouning plate

22/09/2020 Feetbox Evo Installation - V1.0 5
C/ - Unpack the computer
- If necessary, take off the original Lenovo fixation part from
the computer
D/ - Insert the mounting plate on the computer
- Screw the 4 screws with the wing nuts
Installation Manual
1 –Assembly of the computer mounting plate

A/ On each side, remove the 3 screws installed on the platform
= 6 screws
( use the hex key delivered in the “screws and tools” bag )
22/09/2020 Feetbox® Evo Installation - V1.0 6
Installation Manual
2–Preparation of the pressure platform

22/09/2020 Feetbox Evo Installation - V1.0 7
B/ Remove the cover of the platform
Installation Manual
2–Preparation of the pressure platform
Cover

22/09/2020 Feetbox Evo Installation - V1.0 8
A/ - Remove the frame
- Install it on the support
DO NOT squeeze the micro USB cable during this operation
Installation Manual
3–Installation of the frame

22/09/2020 Feetbox Evo Installation - V1.0 9
B/ Connect the micro-usb cable on the pressure plateform plastic box
Check that the switch of the plastic box is on « I » position
Installation Manual
3–Installation of the frame

22/09/2020 Feetbox Evo Installation - V1.0 10
A/ Check that all parts are in the correct position
- pressure platform well installed on the metallic space
- top plate well placed
If not, you won’t be able to install the cover back on the platform
Installation Manual
4–Check of the assembly