Corsair Gaming SCIMITAR PRO RGB User manual

QUICK START GUIDE
RGB
SCIMITAR PRO
MOBA/MMO GAMING MOUSE
RGB
SCIMITAR PRO

CONGRATULATIONS!
The SCIMITAR PRO RGB gaming mouse elevates the game with custom, gaming grade 16000 DPI
native resolution optical sensor, onboard storage with up to three gaming profiles and hardware macro
playback. The innovative, pro-proven Key Slider™side macro button design provides 8mm of travel with
8 levels of adjustability and puts every button within reach. Multicolor dynamic backlighting immerses
you in the game and provides nearly unlimited lighting customization. Complete CUE control takes the
power of your mouse into battle. Don’t just configure your mouse, program it with custom MMO timer
countdowns and double macros, DPI matrices, and more.

All mouse buttons are programmable through
CUE software. These represent the default
settings.
GETTING TO KNOW YOUR MOUSE
> Turn on your computer
> Connect the mouse to a USB port
> Download the Corsair Utility Engine (CUE)
software for the most complete experience
> Run the installer program
> Follow instructions for installation
SETTING UP YOUR MOUSE

A B
C D
E F
Button 1
Left Click
Button 3
Middle Click
Button 2
Right Click
Button 4
Onboard Profile Switch
D
EG
I
A BC
H
FJ
Button 5
DPI Switch
Button 6 to 17
Side Keypad Buttons

109
G H I J
Optical Gaming
Sensor
Keypad Slider
Lock
D
EG
I
A BC
H
FJ
PTFE Glide Pads USB Connection
Cable

8mm
1 2 3 4 5 6 7 8
ADJUSTING THE KEY SLIDER
KEY SLIDER™
CONTROL SYSTEM
REVOLUTIONARY KEY SLIDER™
MACRO BUTTON CONTROL SYSTEM
Move Keypad To Desired Position
(8mm Movement With 8 Locking Positions)

Use key on bottom of mouse to lock /
unlock keypad
Turn clockwise to secure position
LOCKING/UNLOCKING THE KEY SLIDER

Three predefined profiles accessible without software
which include actions common for MMO/MOBA gaming
as well as general purpose keyboard shortcuts. Cycle
through profiles using Onboard Profile Button.
All profiles can be further customized and saved to
onboard storage using
CUE software.
PREDEFINED ONBOARD PROFILES
ONBOARD
PROFILES

8mm
1 2 3 4 5 6 7 8
PROFILE #1 PROFILE #2 PROFILE #3
Button 1 1 1 Copy (Ctrl + C)
Button 2 2 2 Cut (Ctrl + X)
Button 3 3 3 Paste (Ctrl + V)
Button 4 4 4 Undo (Ctrl + Z)
Button 5 5 5 Redo (Ctrl + Y)
Button 6 6 6 Ctrl + Alt + Del
Button 7 7 Q Cycle open apps in order (Alt + Esc)
Button 8 8 W Close active window (Alt + F4)
Button 9 9 E Display/Hide desktop ( + D)
Button 10 0 R Lock PC ( + L)
Button 11 - D Open File Explorer ( +E)
Button 12 = F Open Task Manager (Ctrl + Shift + Esc)

4 ZONE RGB LIGHTING
1
3
2
4
1
3
2
4

Note on environmental protection
After the implementation of the European Directive
2002/96/EU in the national legal system, the following
applies:
— Electrical and electronic devices may not be disposed of
with domestic waste.
— Consumers are obligated by law to return electrical and
electronic devices at the end of their service lives to the
public collecting points set up for this purpose of point of
sale. Details to this are defined by the national law of the
respective country. This symbol on the product, the
instruction manual or the package indicates that a product is
subject to these regulations. By recycling, reusing the
materials or other forms of utilizing old devices, you are
making an important contribution to protecting our
environment.
CAUTION!
The manufacturer is not responsible for any radio or TV
interference caused by unauthorized modifications to
this equipment. Such modifications could void the user
authority to operate the equipment.
FCC STATEMENT
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause
harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment
and receiver.
• Connect the equipment into an outlet on
a circuit different from that to which the receiver
is connected.
• Consult the dealer or an experienced radio/TV
technician for help.
This device must not be co-located or operating in
conjunction with any other antenna or transmitter.
Operation is subject to the following two conditions:
(1)this device may not cause harmful interference, and
(2)this device must accept any interference received,
including interference that may cause undesired operation.