Cotell Fuego1000 FG1088-AW (2S) SP User manual

FG1088-AW(2S)SP
Hospitality Telephones
User Guide
Fuego1000™ SmartStation™
Cordless Telephone
FG1088-AW (2S) SP

FG1088-AW(2S)SP
FG1088-AW(2S)SP Face Drawing
Features
True 2-line phone operation
Analog
1.8Ghz, 1.9 Ghz band (selectable)
Base and handset dialing capability
Secured digital transmission
Auto handset registration
Redial capability for both base and
handset
Music Hold on base and handset
Multi-handsets (max. of 4 handsets can
be registered to a base unit. See
FG1055AW(1S)
Surface mount technology with CPU
control
Full length customizable faceplate
Message waiting indicator lamp
1-10 programmable memory button
High immunity to electro-magnetic
radiation
Gloss or Matt finished high quality
plastic casing
Adjustable flash-hook timer
Handset & speaker volume control
Ringer volume control
Redial, hold, mute & flash
Data port
Small footprint
Emergency dialing during power failure

FG1088-AW(2S)SP
Installation
1. Unpack the box and check for the following items:
a. Main telephone body
b. Base support unit
c. Cordless Handset
d. Power Adaptor c/w power cord
e. RJ11 Line cord
f. RJ45 combo cord
2. Connect one end of the line cord to the junction box and the other end to the wall
telephone outlet. At the same time also connect the output of the power adaptor to the
junction box. Connect one end of the RJ45 cable provided to the junction box and the
other end to the phone.
3. Install the faceplate (delivered separately) onto the telephone.
4. Connect the power adaptor to the wall power outlet and the other end to the phone
power socket
Operation
A. Auto Handset Registration / Auto Pairing
1. Place the unregistered / new handset on the base unit
2. The auto pairing procedure will automatically start up
3. Wait for approx. 5~10 sec until you hear a “double beep” tone, which indicates that the
handset has been successfully registered to that base unit
4. To verify the operation, press the Line 1/ 2 button to get a line and listen to the dial tone.
Now the new handset is ready to be used.
B. Initiating a Call
Using the cordless handset
1. Lift the handset from the cradle
2. Press the Line 1 or Line 2 button to get a line
3. Listen to the dial tone
4. Press the desired number or press a memory button for autodial
6. To drop the call temporarily and make another call, press the flash button
7. To end the call, place the handset back on the cradle.
Using the base unit speakerphone
1. Press speaker button. The red LED indicates that the speaker is active
2. Press Line 1 or Line 2 and Listen to the dial tone
3. Press the desired number or press a memory button for autodial
4. To drop the call temporarily and make another call, press the flash button
5. To end the call, press the speakerphone button again. The LED will go off

FG1088-AW(2S)SP
C. Answering a Call
An audible ringing sound and the flashing LED indicates and incoming call
Using the handset
1. Lift the cordless handset and press Line 1 or Line 2 button to answer the call.
2. To end the call, place the cordless handset back on the cradle.
Using the base unit speakerphone
1. Press the speakerphone button. Select line 1 or Line 2 to answer the call.
2. To end the call, simply press the speakerphone button again. The line status LED will turn off.
D. Redial
Using the handset
1. Lift the handset and press Line 1 or Line 2 button to get a line. Press the “REDIAL “
button to dial out the last dialed number from the memory.
2. To end the call, place the handset back on the cradle.
Using the base unit speakerphone
1. Press the speakerphone button. The red LED indicates that the speakerphone is active,
press the REDIAL button to dial out the last dialed number from the memory.
2. To end the call, press the speakerphone key again. The LED will turn off.
E. Dial from Direct Memory
Using the handset
Option 1:
1. Lift the handset and press the Line 1 or Line 2 button to get a line. Press the M1 ~ M10
button on the base to dial out the pre-stored number from the direct memory.
2. To end the call, place the handset back on the cradle.
Option 2:
1. Lift the handset and press the Line 1 or Line 2 button to get a line. Press the direct memory
Key M1 to M10 button in the base unit to dial out the pre-stored number from the direct
memory.
2. To end the call, place the handset back on the cradle.
Using the base unit speakerphone
1. Press the speakerphone button. The red LED indicates that the speakerphone is active,
press the desired memory button “M1 ~ M10” to dial out the pre-stored number from the direct
memory.
2. To end the call, press the speakerphone key again. The LED will turn off.

FG1088-AW(2S)SP
F. Call Transfer Between Handset and Base Station
1. If the line is engaged by the base unit (in speakerphone mode), the In-use LED on all
registered handsets will be blinking indicating that the line is currently engaged. In this case,
any one of the registered handsets may take the line by pressing the corresponding LINE
button. The active call is then transferred/ hand-over from the base unit to the requesting
handset. Upon successful transfer of the call, the base speakerphone will be turned off
automatically.
2. Similarly, if the line is engaged by any one of the registered handsets, the base unit may take
the line by pressing the corresponding LINE button. The active call is then transferred/ hand-
over from the handset to the base unit. Upon successful transfer of the call, the handset will
go off-line automatically.
G. Speakerphone Volume
During conversation, (off hook state), press the Vol+ or Vol- button on the base unit to
increase or decrease the speaker volume
H. Ringer Volume
During standby mode (on hook state), press the Vol+ or Vol- button to increase or decrease
the ringer volume
I. Flash
Press the FLASH button to break the line momentarily. This will end the
current call conversation and allows you make another call.
* The period of flash time is determined by the flash timer setting, please refer to the
appendix for the setting procedure.
J. Hold
1. During conversation, press the HOLD button to place a call on hold. The
other party will hear hold music.
2. To deactivate the call on hold, press the HOLD button again.
K. Mute
1. During conversation, press the MUTE button will disable the opposite party from hearing
your conversation
2. To deactivate Mute, press the MUTE button again.