Country Flame 400 User manual

Model 33 Model 37 Model 42
33"Firebox width
approx. 530 lbs. 37"Firebox width approx. 580 lbs. 42"Firebox width approx. 630 lbs.
A. 38"overall width 42"overall width 48"overall width
B. 50"wide with insulation
& concrete blocks 54"wide with insulation & concrete blocks 60"wide with insulation & concrete blocks
C. 76"wide with return
air grilles 80"wide with return air grilles 86"wide with return air grilles
D. 84"wide with return air
grilles and brick 88"wide with return air grilles and brick 94"wide with return air grilles and brick
E. 92"wide concrete base 96"wide concrete base 102"wide concrete base
F. 48"tall 48"tall 48"tall
G. 26"deep 26"deep 26"deep
H. 6"duct diameter 8"duct diameter 8"duct diameter
I. 13"x13"flue tile 13"x13"flue tile 13"x17"flue tile
1. (2) Duct Adapter Rings (optional)
2. Flue
3. Heat Grille Holder
4. Heat Grille
5. Heat Sensor (mounting bracket behind grille)
6. Electrical Connection Box
7. Ash Dump with Sliding Cover
8. 1/2"x 3"Grates and Andirons (optional)
9. (2) Return Air Grilles
10. (2) 525 CFM Blowers with
Individual Variable Speed Controls
11. Rotary Damper Rod
Fireplace Furnace
The “smart” fireplace for total home heating.
This cutaway drawing shows the Country Flame
Fireplace Furnace’s inside heat exchanger area. This
advanced design transfers fireplace heat to moving air
masses; two 525 CFM blowers move this warmed air
gently through the duct system into the home. While
BTU outputs of up to 175,000 per hour are easily
generated, the design of the Fireplace Furnace allows
it to provide adequate heat levels from a bed of coals
or smaller-size fires.
B
C
D
E
A
131/4"
131/4"
F
HI
10
2
4
9
11
8
7
1
Also Included
1 Wall Thermostat
1 Sliding Ash Dump Cover
1 Clean-Out Door
2 Variable Speed Controls
1 Heat Sensor
1 Roll Insulation
The Country Flame Fireplace Furnace is a full masonry unit, to be
installed according to Chapter 37 of the Uniform Building Code.
3G
6
5
10
910
V1004A
Features
150 Michigan St. S.E., Hutchinson, MN 55350
Phone: [phone] Fax: [phone]
[email protected]
www.countryflame.com

Country Flame’s Fireplace Furnace lets you control the
temperature with a standard wall thermostat. The unique
Country Flame design connects to central heating and
air-conditioning ducts (or its own duct system) to form a
complete heating system. Engineered to maximize BTU
output, Country Flame’s baffled heat exchanger provides
up to 175,000 BTU/hr – enough heat for a 2,000 to
3,000-square-foot home. The Fireplace Furnace
minimizes heat escaping up the chimney and
maximizes your energy dollars.
THE BEAUTY OF AFIREPLACE. THE COMFORT OF AFURNACE.
Fully Automatic. Thermostatically Controlled. 0 25 50 75 100 125 150 175
Country Flame
Fireplace Furnace
Circulating
Fireplace
Fireplace
Zero-Clearance
Fireplace Box
Fireplace Insert
Average Home
Furnace
BTUS PER HOUR (THOUS.)
Optional Model 400 and 500
Series doors include standard
shroud and airwash system.
400 SERIES DOOR
500 SERIES DOOR
• The rotary control damper lets you adjust the damper
precisely without reaching inside the firebox.
• Two 525 CFM blowers circulate air through your ductwork
to start heating distant rooms in as few as 20 minutes after
starting a fire.
• The heavy steel firebox is designed for the most
rugged use and optimal heat exchange.
• Use either a masonry flue system or a Class Afabricated
chimney with your Country Flame Fireplace Furnace in
new construction or a remodeling project.
• 10-Year limited warranty on firebox and grate systems.
• Optional super-heavy-duty half-inch steel grates make
starting fires easy and will far outlast conventional grates.
• Deep wood box holds more than most fireplaces.
Optional 500 Series Door features your choice of three
finishes: Black, Gold, or Nickel. Visit countryflame.com
or see our fireplace door literature for details.
ENGINEERED FOR MAXIMUM
COMFORT AND EFFICIENCY
When you take into account that
the average cost is only slightly
more than a traditional masonry
fireplace, and consider the added
comfort, convenience, and utility
savings – plus the enjoyment and
aesthetic appeal of a real wood
fire – you’ll see the Country Flame
Fireplace Furnace is amazingly
affordable.
CHOOSE AFIREPLACE THAT IS
AN EFFICIENT HEAT SOURCE
FOR ADDED COMFORT,
ENJOYMENT, AND SAVINGS.
(Andirons Optional)
The Country Flame Fireplace Furnace
Heated air
circulates
throughout
the house
using
standard
ductwork.
Air intake
draws
room air
into the
blower
system.
Fireplace Furnace

Country Flame’s Fireplace Furnace lets you control the
temperature with a standard wall thermostat. The unique
Country Flame design connects to central heating and
air-conditioning ducts (or its own duct system) to form a
complete heating system. Engineered to maximize BTU
output, Country Flame’s baffled heat exchanger provides
up to 175,000 BTU/hr – enough heat for a 2,000 to
3,000-square-foot home. The Fireplace Furnace
minimizes heat escaping up the chimney and
maximizes your energy dollars.
THE BEAUTY OF AFIREPLACE. THE COMFORT OF AFURNACE.
Fully Automatic. Thermostatically Controlled. 0 25 50 75 100 125 150 175
Country Flame
Fireplace Furnace
Circulating
Fireplace
Fireplace
Zero-Clearance
Fireplace Box
Fireplace Insert
Average Home
Furnace
BTUS PER HOUR (THOUS.)
Optional Model 400 and 500
Series doors include standard
shroud and airwash system.
400 SERIES DOOR
500 SERIES DOOR
• The rotary control damper lets you adjust the damper
precisely without reaching inside the firebox.
• Two 525 CFM blowers circulate air through your ductwork
to start heating distant rooms in as few as 20 minutes after
starting a fire.
• The heavy steel firebox is designed for the most
rugged use and optimal heat exchange.
• Use either a masonry flue system or a Class A fabricated
chimney with your Country Flame Fireplace Furnace in
new construction or a remodeling project.
• 10-Year limited warranty on firebox and grate systems.
• Optional super-heavy-duty half-inch steel grates make
starting fires easy and will far outlast conventional grates.
• Deep wood box holds more than most fireplaces.
Optional 500 Series Door features your choice of three
finishes: Black, Gold, or Nickel. Visit countryflame.com
or see our fireplace door literature for details.
ENGINEERED FOR MAXIMUM
COMFORT AND EFFICIENCY
When you take into account that
the average cost is only slightly
more than a traditional masonry
fireplace, and consider the added
comfort, convenience, and utility
savings – plus the enjoyment and
aesthetic appeal of a real wood
fire – you’ll see the Country Flame
Fireplace Furnace is amazingly
affordable.
CHOOSE AFIREPLACE THAT IS
AN EFFICIENT HEAT SOURCE
FOR ADDED COMFORT,
ENJOYMENT, AND SAVINGS.
(Andirons Optional)
The Country Flame Fireplace Furnace
Heated air
circulates
throughout
the house
using
standard
ductwork.
Air intake
draws
room air
into the
blower
system.
Fireplace Furnace

Model 33 Model 37 Model 42
33"Firebox width
approx. 530 lbs. 37"Firebox width approx. 580 lbs. 42"Firebox width approx. 630 lbs.
A. 38"overall width 42"overall width 48"overall width
B. 50"wide with insulation
& concrete blocks 54"wide with insulation & concrete blocks 60"wide with insulation & concrete blocks
C. 76"wide with return
air grilles 80"wide with return air grilles 86"wide with return air grilles
D. 84"wide with return air
grilles and brick 88"wide with return air grilles and brick 94"wide with return air grilles and brick
E. 92"wide concrete base 96"wide concrete base 102"wide concrete base
F. 48"tall 48"tall 48"tall
G. 26"deep 26"deep 26"deep
H. 6"duct diameter 8"duct diameter 8"duct diameter
I. 13"x13"flue tile 13"x13"flue tile 13"x17"flue tile
1. (2) Duct Adapter Rings (optional)
2. Flue
3. Heat Grille Holder
4. Heat Grille
5. Heat Sensor (mounting bracket behind grille)
6. Electrical Connection Box
7. Ash Dump with Sliding Cover
8. 1/2"x 3"Grates and Andirons (optional)
9. (2) Return Air Grilles
10. (2) 525 CFM Blowers with
Individual Variable Speed Controls
11. Rotary Damper Rod
Fireplace Furnace
The “smart” fireplace for total home heating.
This cutaway drawing shows the Country Flame
Fireplace Furnace’s inside heat exchanger area. This
advanced design transfers fireplace heat to moving air
masses; two 525 CFM blowers move this warmed air
gently through the duct system into the home. While
BTU outputs of up to 175,000 per hour are easily
generated, the design of the Fireplace Furnace allows
it to provide adequate heat levels from a bed of coals
or smaller-size fires.
B
C
D
E
A
131/4"
131/4"
F
HI
10
2
4
9
11
8
7
1
Also Included
1 Wall Thermostat
1 Sliding Ash Dump Cover
1 Clean-Out Door
2 Variable Speed Controls
1 Heat Sensor
1 Roll Insulation
The Country Flame Fireplace Furnace is a full masonry unit, to be
installed according to Chapter 37 of the Uniform Building Code.
3G
6
5
10
910
V1004A
Features
150 Michigan St. S.E., Hutchinson, MN 55350
Phone: [phone] Fax: [phone]
[email protected]
www.countryflame.com