Cozy N Safe SNOWDON User manual

ECE R 16 No 44.04
SNOWDON
Instruction Manual
EST-402
Group 0+
Birth to 13kg
(Approximately Birth to 12-15 months)

Before using your new car seat it is important to fully
understand how to install your car seat properly, secure
your child correctly and familiarize yourself with the
features and functions of the seat.
Please take the time to read and understand these
instructions fully. This is best done with the seat in front
of you.
Please always read the safety warnings.
Before using the seat in your vehicle you should prepare
the seat for your child.
2

3
PARTS AND
EST- 402 Car Seat
INTERIOR EQUIPMENT

4
EST- 402 Car Seat
Canopy
Newborn
Insert Cushion
canopy
Newborn
insert Cushion
Harness
Button
Buckle Harness
adjuster lever
Harness
adjuster strap
Comfort pad
Safety belt groove
Chest pad
Handle

5
EST- 402 Car Seat
User manual
Belt slot
Harness
Harness connector
T bar

6
EST- 402 Car Seat
1. This is a “Universal” child restraint, it is approved to
Regulation NO.44,04series of amendments,for general
use in vehicles and it will fit most,but not all car seats.
2. A correct fit is likely if the vehicle manufacturer has
declared in the vehicle handbook that the vehicle is
capable of accepting a “Universal”child restraint for this
age group.
3. This child restraint has been classified as “Universal”
under more stringent conditions than those which
applied to earlier designs which do not carry this notice.
NOTICE

7
EST- 402 Car Seat
4. If in doubt, consult either the child restraint
manufacturer or the retailer.
Only suitable if the vehicle is fitted with 3-point safety
belts, Approved to UN/ECE Regulation No.16 or other
equivalent standards.
Vital information-READ NOW
For your child’s safety please read these instructions
carefully before use and keep them for future reference.
Failure to follow the instructions contained in this
manual could result in serious injury to your child.

8
EST- 402 Car Seat
1. This instruction manual can be retained in the special
space of the child seat for its life period.
2. Do not use this child safety seat at the home. It has
not been designed for home use and should only be used
in your car.
3. Never leave your child unattended in the child
restraint system even for a short time.
4. The child safety seat should be changed when it has
been subject to violent stresses in an accident.

9
EST- 402 Car Seat
5. This child restraint should be securely belted in the
vehicle even when not in use. In a crash or sudden stop,
an unsecured child safety seat may injure other
occupants.
6. Always make sure that any straps holding the child
restraint to the vehicle are tight. Any straps restraining
the child should be adjusted to the child's body and
check that the straps are NOT twisted.
7.IMPORTANT! Ensuring that any lap straps is worn
low down, so that the pelvis is firmly engaged.

10
EST- 402 Car Seat
8. Do not use any load bearing contact points other
than those described in the instructions and marked in
the child restraint.
9.Any luggage or other objects liable to cause injuries
in the event of a collision shall be properly secured.
10.The rigid items and plastic parts of a child restraint
must be so located and installed that they are not liable,
during everyday use of the vehicle to become trapped
by a moveable seat or in a door of the vehicle.

11
EST- 402 Car Seat
11. To prevent from the risk of fall, your child should
always be fastened.
12. It is dangerous to make any alteration or additions
to the device without the approval of the competent
authority, and a danger of not following closely the
installation instructions provided by the child restraint
manufacturer.
13.This child safety seat is designed for children from
0 to 13 kg. Neveroverload the child safety seat more
than one child or with other loads.

12
EST- 402 Car Seat
14. The child restraint must not be used without the
cover.
15. The seat cover should not be replaced with any
other than the one recommended by the manufacturer,
because the cover constitutes an integral part of the
restraint performance.
16. Before you adjust any movable or adjustable parts
of your child safety seat, you must remove your baby
from the child safety seat.
17.The child safety seat should be kept away from
sunlight if the seat is not provided with a textile,
otherwise it may be too hot for the child’s skin.

13
EST- 402 Car Seat
18. Never use a second-hand product, as you can never
be certain what was happened to it.
19. NOTICE : Do not use in any configuration not
shown in the instructions.

14
EST-402 Car Seat
Safety Instruction
Only suitable if the
approved vehicles are
fitted with 3 point
safety-belts, approved
to UN/ECE Regulation
No.16 or other
equivalent standards.

15
Using safety seat in this way
Please carefully implement the Country Traffic
Safety Regulations
Do not install the child safety seat at the front seat
with airbag .
Please read the instruction manual carefully on how
to use the airbag
Forward facing traffic direction Correct
Back facing traffic direction Error
Vehicle is only fitted with 2 - point safety belt Error
Vehicle is fitted with 3 - point safety belt Correct
Seat beside the driver Correct
Rear seat Correct
Rare middle seats three-point belt Correct
NOTICE
Belt in this location
Unable to install the position
Do not install the child safety seat
at the front seat with air bag.
Only with the three point safety
belt, can this location.

16
EST- 402 Car Seat
Securing your baby
For the protection of your baby
Always secure your baby in the baby seat using
the seat belt.
Never leave your baby unattended in the baby seat
when placing it on elevated surfaces
(e.g.a table, nappy changing unit,etc.)
Never allow the strap end to become caught in moving
parts(e.g.Automatic doors, escalators, etc).

17
EST- 402 Car Seat
1).Caution! The plastic parts of the baby seat heat up
in the sun, so that your baby may get burnt. Protect
your baby and the baby seat against intensive solar
radiation(e.g.by putting a light cloth over the seat).
2).The baby seat requires only one seating position in
the car. This advantage means, however, that your baby
must be in a semi-reclined position.
3).Take your baby out of the baby seat as often as
possible to relieve its spine, We recommend frequent
breaks during long journeys. Even outside of the car,
please avoid leaving your babyin the baby seat for too
long.

18
EST- 402 Car Seat
Removing the newborn insert cushion
The newborn insert cushion
is used to provide extra
comf ort f or very small
babies.
Caution! Only use the lying
support when the shoulder
belt is in the lowest slot
position .
Slide shoulder belt out of 3
baron the back of the carrier.

19
EST- 402 Car Seat
Removing the newborn insert cushion
Once you have taken out
the belt you can then
remove the newborn insert
cushion.
Then put the belt through
the upper slot and slide
straps in 3 bar.
Shoulder
straps

20
EST- 402 Car Seat
Adjusting the handle