Craig CTFT750 User manual

7 INCH PORTABLE DVD/CD PLAYER
7 INCH PORTABLE DVD/CD PLAYER
Model: CTFT750
PLEASE READ BEFORE OPERATING THIS EQUIPMENT.
Owner's Manual
Size: 148.5(W) x 210(H)mm (A5)

connect to power, turn

1.PLAY/PAUSE:
~ During playback, press to pause. Press again to resume normal playback.
2.MODE:
~ Press repeatedly to set the aspect ratio of the screen to 4:3 or 16:9 to match the aspect ration of the movie.
3.STOP:
~ While DVD/CD playing, press once to pre-stop (In this mode, when press the PLAY/PAUSE
button again. The player will start to play the point you were stopped).
~ Or, press twice to stop playback completely (In this mode, when press the PLAY/PAUSE
button again. The player will start to play the current disc from beginning).
4.MENU:
~ Press to return to disc's menu page.(Function depends on the disc recording).
5.VOL (Volume) +:
~ Press to increase the volume level.
6.VOL (Volume) -:
~ Press to decrease the volume level.
7. OPEN:
~ Press to open the Disc door.
8.SETUP:
~ Press to enter to or exit from setting menu.
9. UP/PREV（Preview)button:
~ In disc playback, press repeatedly to skip to previous chapters/tracks as desired.
~ In setting menu, press repeatedly to move the cursor on the screen upward.
10.DOWN/NEXT button:
~ In disc playback, press repeatedly to skip to next chapters/tracks as desired.
~ In setting menu, press repeatedly to move the cursor on the screen downward.
11. LEFT /FB (Fast Backward) button
~In disc playback, press repeatedly to set the search speed and fast searching the desired section backward.
Press the PLAY/PAUSE button to resume normal playback.
~ In setting menu, press repeatedly to move the cursor on the screen to left.
DC IN jack
AV (Audio/Video) OUT jack
EARPHONE jack
POWER ON/OFF
switch
STOP button
PLAY/PAUSE button
VOL (Volume)- button
VOL (Volume)+ button
MODE button
SETUP button
MENU button
Panel
Speaker
OPEN
UP/PREV button
DOWN/NEXT button
LEFT/FB button
RIGHT/FF button
ENTER button
Speaker

12. RIGHT /FF (Fast Forward) button
~ In disc playback, press repeatedly to set the search speed and fast searching the desired section forward.
Press the PLAY/PAUSE button to resume normal playback.
~ In setting menu, press repeatedly to move the cursor on the screen to right.
13. ENTER:
~ In the setting menu, press to confirm the selection.
14.POWER ON/OFF:
~Slide the Power ON/OFF switch to ON position to power ON the unit. When finished watching/listening,
slide to OFF position to power off the unit. (Note: For saving the battery power. Always power off the unit
by slide the Power ON/OFF switch to OFF position).

Numeric buttons
MUTE button
POWER button
ZOOM button
REPEAT button
SETUP button
ENTER button
MENU button
TITLE button
AUDIO button
(0-9 and 10+)
Fast Search and
buttons
SUBTITLE button
TFT button
ANGLE button
DISPLAY button
PLAY/PAUSE ( ) button
Direction button
PROG ( Program ) button
VOL (Volume)button+
VOL (Volume) button-
SLOW button
GOTO button
A-B (Repeat) button
Skip and buttons
STOP button

USB/
SD
OK
Battery installation:
1. Press the tabs on the battery door and lifting it off.
2. Install two (2) x AAA size batteries (included) into the battery compartment as the figure below and the
polarity markings inside battery compartment.
3. Replace the battery door.
BATTERY PRECAUTIONS:
Follow these precautions when using a battery in this device:
1. Use only the size and type of battery specified.
2. Be sure to follow the correct polarity when installing the battery as indicated in the battery compartment.
A reversed battery may cause damage to the device.
3. Do not mix different types of batteries together (e.g. Alkaline and Carbon-zinc) or old batteries with fresh ones.
4. If the batteries in the device are consumed or the device is not to be used for a long period of time, remove the
batteries to prevent damage or injury from possible battery leakage.
5. Do not try to recharge the battery not intended to be recharged; it can overheat and rupture. (Follow battery
manufacturer's directions.)
6. Do not dispose of battery in fire. Battery may explodes or leak.
7. Clean the battery contacts and also those of the device prior to battery installation.
Remarks:
1. When there is an obstacle between the unit and the transmitter, the transmitter may not operation.
2. When direct sunlight, an incandescent lamp, fluorescent lamp or any other strong light shines on the remote
control of the unit, the remote operation may be unstable.
Remote Control Sensor

AC CONNECTION
The unit has a built-in rechargeable Li-polymer battery, recharge it before use as below:
AC/DC Adaptor:
~ Insert the small plug from the AC/DC Adaptor into the DC IN jack on the side of the unit.
~ Insert the AC/DC Adaptor into a conveniently located AC outlet having
AC 100-240V~; 50/60Hz. Charging will start automatically. During charging,
the Red charging indicator will light. When finished, the color of the
charging indicator will turns to green.
NOTES:
~ Use the enclosed AC/DC Adaptor for this product only.
~ Remove the AC/DC Adaptor from the wall outlet when not using a long period of time.
~ This AC/DC Adaptor is intended to be correctly orientated in a vertical or floor mount position.
USING THE CAR ADAPTER
Insert the small plug from the Car Adapter into the DC IN jack on the unit.
Insert the Car Adapter into the Car Cigarette Lighter Jack having
DC 12V output in the car.
Notes:
~ Never connect it to a Car Cigarette Lighter Jack which output is DC 24V.
~ During charging, the Red charging indicator will light. When finished, the color of the charging indicator will turns to green.
NOTES:
Your battery will last longer if you following these simple guidelines for caring for and storing it.
A. For charging first time, charge it at least 10 hours.
B. Do not over charge (longer than 24 hours). Excessive charging or discharging may shorten the battery's life.
C. Battery life naturally shortens slowly over time.
D.The rechargeable battery incorporated in this product is not user replaceable.

Connecting to a TV with supplied AV connection cable:
Video input jack (Yellow)
Audio left channel input jack (White)
Audio right channel input jack (Red)
TV
EARPHONES JACK:
For private listening, insert the supplied Earbuds into the EARPHONES jack. The sound from speakers will turned off.

The viewing angle of the swivel panel can adjust as below as desire:

BASIC OPERATION
Disc Playback:
~ Lift up the panel and turn to desired angle. Slide the POWER ON/OFF switch to "ON" position to power on the unit,
the Green indicator on front of the unit will light.
~ Press the OPEN area on the disc door to open it. Place the disc on the center spindle with label side facing up. Close the
disc door then the player will start playback automatically.
~ To power off, press the POWER button on the remote control to turn the unit to standby mode. The Green indicator will
remain lighting. Press the POWER button again to turn the unit on from standby mode. Or, slide the POWER ON/OFF
switch to OFF position to power off the unit. (For saving energy, always power off the player by slide the POWER ON/OFF
switch on the player to OFF position .)
PROG (Program)
During DVD playback, press the PROG (Program) button. The setting menu will appear on the screen as Fig. A.
~ Using the Numeric and Direction buttons to enter the desired Chapter and Title number. Fig.B will appear on
the screen.
~ Using the Direction buttons to select and highlight the "Start" button then press the ENTER button to start program
playback.
~ During playback, press the button twice to cancel the program playback.
Fig.A Fig.B
During CD disc playback, press the PROG button, the setting menu will appear on the screen as Fig. C:
Fig.C Fig.D
~ Using the Numeric and Direction buttons to enter the desired Track number, Fig. D will appear on the screen.
~ Using the Direction buttons to select and highlight the "Start" button, then press the ENTER button to start program
playback.
~ During playback, press the button twice to cancel the program playback.
Exit Exit Start NEXT NEXT
Exit Exit Start
NEXT NEXT

POWER
Slide the POWER ON/OFF switch to ON position to power on the unit. Slide the POWER ON/OFF switch to OFF
position to power off the unit.
Press the POWER button on remote control to t rn on the unit from standby mode.
Press the POWER button again to turn the unit to off (standby mode). NOTE: Before using the POWER button to turn
ON/OFF the unit, make sure the POWER ON/OFF Switch on the side of unit was slided to ON position.
ZOOM
During DVD disc playback, press repeatedly to zoom in/out as below:
In the zoom mode, press the Direction , , , buttons to move the position of picture as desire.
A-B
During playback, press A-B (Repeat) button to select point A.
Press it again to select point B. The player will play the section from A to B automatically and
repeatedly until the A-B button was pressed.
u
During playback, press to pause.
Press again to resume normal playback.
During playback, press the button repeatedly to select the search speed and searching
the specific section forward as below:
During searching, press the PLAY/PAUSE button resume to normal playback.
During playback, press the button repeatedly to select the search speed and searching
the specific section backward as below:
During searching, press the PLAY/PAUSE button resume to normal playback.
Press repeatedly to skip to previous chapters/tracks as desired.
Press repeatedly to skip to next chapters/tracks as desired.
BASIC OPERATION (CONT.)
STOP
During playback, press once to pre-stop (In this mode, when press the PLAY/PAUSE button again.
The player will start to play the point your were stopped).
Or, press twice to stop playback completely (In this mode, when press the PLAY/PAUSE button again.
The player will start to play the current disc from beginning).
VOL +/-
Press VOL+ button to increase volume.
Press VOL- button to decrease volume.

ANGLE
During DVD playback, press repeatedly to select the available angle of recording as desired.
NOTE: Function depends on the recording of the DVD disc, not all the DVD discs with this function.
SUBTITLE
During DVD playback, press repeatedly to select the available subtitles on the DVD as desired.
NOTE: Function depends on the recording of the DVD disc, not all the DVD discs with this function.
MUTE
During playback, press to turn off the sound temporary, press again to resume.
TITLE
During DVD playback, press to return to Title menu.
NOTE: Function depends on the recording of the DVD disc, not all the DVD discs with this function.
REPEAT
During CD playback, press repeatedly to select the repeat mode to Track (plays the current track repeatedly)
or All (Plays all tracks repeatedly) as desired.
During DVD playback, press repeatedly to select the repeat mode to Chapter (Plays all the titles in the
current chapter repeatedly); Title (Plays the current title repeatedly) or All (Plays all tracks on the
current disc repeatedly).
To cancel, press the button repeatedly until all repeat icons disappear on the screen or press the button twice to stop.
During MP3 disc playback, press repeatedly to select the repeat mode to Repeat One (Plays the current track repeatedly);
Repeat Folder (Plays all the tracks in the current folder repeatedly) or Repeat Off (Turn off repeat mode).
0-9 and 10+ buttons
Enter the desired number in the setting menu or in tracks searching mode.
Remark: "10+" button is valid only in DVD playback mode, e.g. to select chapter "23", press "10+" button twice and
"3" button to confirm selection.
MENU
During DVD playback, press to return to disc menu.
GOTO
In DVD Playback:
To select the desired Title and Chapter, press the GOTO button once, the Title and Chapter selection menu will appear on
the screen. Use the Direction and Numeric buttons to select the desired title and chapter then press the ENTER button to
start playback.
Select the desired establish time of the current Title to play, press the GOTO button twice, the time selection table will
appear on the screen. Using the Direction and Numeric buttons to enter the desired establish time. The unit will start plays
the movie from the selected establish time.
Select the desired establish time of the current Chapter to play, press the GOTO button three times, the time selection table
will appear on the screen. Using the Direction and Numeric buttons to enter the desired establish time. The unit will start
plays the movie from the selected establish time.
BASIC OPERATION (CONT.)

SLOW
During playback, press the SLOW button to reduce the playing speed to 1/2. Repeatedly press this button and the speed
will reduce to 1/4,1/8,1/16 and resume normal playback. To resume normal playback, press the PLAY/PAUSE button.
TFT
Press to turn off the screen, press again to turn it on.
ENTER button
Press to confirm the selection.
DIRECTION ( )
Press to moving the cursor in the setting menu.
SETUP
Press to enter to setting menu.
DISPLAY
During playback, press repeatedly to display the playback conditions on screen.
AUDIO
During DVD playback, press repeatedly to select the available language or audio channel in the disc.
Note: Function depends on the record of the disc.
In CD Playback:
Select the desired establish time of the current disc, press the GOTO button once, the time selection table will appear on the
screen. Using the Direction and Numeric buttons to enter the desired establish time. The unit will start plays
the music from the selected establish time.
Select the desired establish time of the current track, press the GOTO button twice, the time selection table will
appear on the screen. Using the Direction and Numeric buttons to enter the desired establish time. The unit will start plays
the music from the selected establish time.
Select the desired track, press the GOTO button three times, the selection table will appear on the screen. Using the Direction
and Numeric buttons to enter the desired track number. The unit will start plays the music from the selected establish time.
In MP3 playback
Press the GOTO button once, the current track number will be highlighted, use the Numeric button to enter the desired
track's number then press the ENTER button to start play it.
To select the desired establish time of the current track to play, press the GOTO button twice, the current establish time will
be highlighted. Using the Numeric buttons to enter the desired establish time. The unit will start plays the music from the
selected establish time.
BASIC OPERATION (CONT.)

SYSTEM SETUP
Setting Menu:
In stop playback mode, press the SETUP button, the setting menu will appear on the screen as below. Using
the Direction buttons to select and highlight the function you need to set or reset. Press the ENTER button to enter
or confirm the selection. After setting, press the SETUP button to save the settings and exit.
GENERAL SETUP
1. If TV Display is selected, using the Direction and ENTER buttons to set the aspect ratio to match the playing movie.
2. If Angle Mark is selected, using the Direction and ENTER buttons to set it On or Off. If set to On, when multi-angles are
available on the playing DVD, the multi-angle logo will appear on the screen.
3. If OSD Lang(On Screen Display Language) is selected, using the Direction and ENTER buttons to set the OSD language
as desired.
4. If Caption is selected, using the Direction and ENTER buttons to set it On or Off. If set to On, when captions available on
the playing DVD, it will show on the screen automatically.
5. If Screen saver is selected, using the Direction and ENTER buttons to set it On or Off. If set to On, the screen saver will
come on when the unit stops or the image is paused for approximately 3-5 minutes.
6. If Last Memory is selected, using the Direction and ENTER buttons to set it On or Off. If set to On, the unit will start
playback from the position where the disc was stopped last time.
AUDIO SETUP
If Speaker Setup is selected, press the ENTER button, Downmix setting menu will appear, using the Direction and ENTER
buttons to set it to LT/RT; Stereo.
~If set to LT/RT, the rear left or rear right channels will play on both Left and Right Speakers.
~If set to Stereo, the rear left channel will play on the Left Speaker; the rear right channel will play on Right Speaker.
DOLBY DIGITAL SETUP
1. If Dual Mono is selected, using the Direction and ENTER buttons to set it to Stereo, L-Mono (Play Left channel on all
speakers), R-Mono (Play Right channel on all speakers) or Mix-Mono (Mixed Right and Left channel then plays on all
speakers) as desired. (Functions depend on the recording of the disc).
2. If Dynamic is selected, using Direction and ENTER buttons to set the dynamic level as desired or turn it off.

FEATURES SETUP
P EFERENCE SETUP
1. If TV Type is selected, using the Direction and ENTER buttons to set to PAL, AUTO or NTSC. (Note: The TV system in
US, Canada and Mexico is NTSC.)
2. If Audio, Subtitle or Disc Menu is selected, using the Direction and ENTER buttons to set the priority of the available
language. (Functions depend on the recording of DVD.)
3. If Parental is selected, using the Direction and ENTER buttons to set the rating level as desired as follow:
~ Press the button to enter, the rating level list will appear.
~ Press the or button to select the desired level.
~ Press the ENTER button to enter, password enter window will pop up.
~ Enter the four digit password (default password is 7500) by pressing the Numeric buttons.
~ Press the ENTER button to save the settings and exit.
~ Rating levels:
1. (KID SAF): Kid safe
2. (G): All ages
3. (PG): Parental Guidance
4. (PG 13): Parental Guidance less than 13 years old
5. (PGR): Under 17 years old, Parental Guidance suggested
6. (R): Under 17 years old, Parental Guidance strongly
7. (NC17): 17 years old and above
8. (ADULT): Adult only
4.If password is selected, press the ENTER button to enter, the sub setting menu will appear.
~ If password Mode is selected, using the Direction and ENTER buttons to set it ON (activate the rating level setting) or
OFF (Password is needed).
~ If Password is selected, press the ENTER button twice to enter, the sub setting menu will appear.
a. Enter the four digit old password. The column of New PWD will be highlighted.
b. Enter the new four digit password. The column of Confirm Password will be highlighted.
c. Enter the new password again. OK button will highlighted. Press the ENTER button to save the setting and exit.
5. If Default is selected, using the Direction and ENTER buttons to reset all settings to default setting or press the SETUP
button to exit without changes.
R
VIDEO SETUP
1. If the panel quality is selected, using the Direction and ENTER buttons to set the panel quality of screen such like
Sharpness, Brightness, Contrast, Hue and Saturation.

TROUBLESHOOTING
No power
Power of built-in battery may consumed. Recharge it by the supplied AC/DC Adaptor. During charging, the unit can plays
disc at the same time.
No sound
~ Volume level too low. Rising it by press the VOL + button.
Aspect ration of the screen incorrect
~ :
the movie.
Press the MODE button on unit repeatedly to change the aspect ration to 4 3 or 16:9 to match the aspect of
Remote control not functioning
~ The battery is consume, replace by new one .
~ Point the remote control to the remote sensor on the unit.
~ Remove the obstacles between the remote control and remote sensor.
Forgotten the preset rating password.
If the password was forgotten, used the default password 7500 to release the lock and reset a new
password.