Craig CLP290 User manual

1

2
Please setup Gmail TM account during initial setup. If you are going to use a password or a pattern
unlock you must have a valid Gmail TM account setup in the event you forget either.
Forgot lock pattern on Android , Here's a way to reset it.
Enter wrong pattern 5 times and wait for 30 seconds.
Select “Forgot pattern” and enter your Gmail TM account username and password.
Make sure you use the same account that was used to activate the device and double check the password
by logging in to that Google TM account in a browser on laptop or PC.
If you don't have access to the original Gmail TM account, you will need to do a hard reset and lose your
settings and apps on the device. Data on the memory card will not be erased.

3

4

5

6
This manual contains important safety precautions and information for correct usage. Please be sure to read
this manual carefully before use to avoid any damage to the device.
1. Do not place the product in hot, wet or dusty environments.
2. Do not place the product in hot environments. Especially in summer, do not place it in a car with all the
windows closed or in the sun.
3. Avoid dropping or smashing the product and do not shake the TFT screen excessively as it may cause
damage or abnormal display screen.
4. Select a suitable volume and avoid loud sound while using headphone/earphones. Turn down the volume
or stop using the product if your ears start hurting or ringing.
5. In the following situations, please charge the product:
A. The device shows on the bottom right corner .
B. System automatically shuts down, and it turns off soon after restart.
C. Operation buttons do not work properly.
D. The unit will not turn on.
Note: Chargers of other models cannot be used for this device because they may cause damage to the device
that will void the warranty. Please contact our customer service department if you need a replacement
charger.
Do not disconnect the device while formatting, downloading and/or uploading; otherwise, application errors
may occur.
We are not responsible for any memory erasure or loss caused by damage or product maintenance, or
other personal reasons.
Do not disassemble the product, and avoid cleaning the product with ethyl alcohol, thinner, or benzene.
Do not use this product in areas which prohibit the use of electronic devices, for example, in an airplane.
Do not use this product while driving or walking in the street, as it may cause a car accident.
Notes:
This device is not waterproof.
All images in this manual are for reference only. Specifications and appearance of the product and the
screens are subject to change without prior notice.

7
Android 4.2 Firmware Installation Guide
Please follow installation procedures as below to reinstall your CLP290.
1. Download entire firmware to desktop or laptop computer running windows. Then unzip file and
you will see the file name – “Firmware Install”. Copy that to SD card.
2. Power off the CLP290 and plug into wall socket as not to lose battery power during firmware
installation.
3. Insert SD card after unit fully loads and then Power on the unit.
4. The unit will detect firmware and start to upgrade automatically. Then the screen will show
“WMT Android4.2 FW Upgrading…”
5. Do not Power off the unit during upgrading process!!

8
6. Wait until the unit finished automatically. It needs approximate 5 minutes. When finish
upgrading, it shows in GREEN bolding word “PLEASE REMOVE INSTALLATION MEDIA…”atthe
bottom of screen
7. Remove SD card from the CLP290. It will restart automatically.
8. Now, it is finished.
NOTE: During firmware update has the unit plugged into wall outlet;
otherwise, firmware will be “corrupted” if power off during updating.
IMPORTANT: Firmware update/reinstall will wipe out any software or
information installed to unit after initial startup

9
POWER SOURCE
Battery Recharge
The device has Recharging the Battery abuilt-inDC 3.7V rechargeable Lithium-ion Polymer batteries.
Recharge as follows:
Insert the small plug from the supplied AC/DC Adaptor into the DC IN jack on the device. Plug the
AC/DC Adaptor into the wall outlet having AC 100-240V~, 50/60 Hz.
During charging, the on screen charging icon will turn on. When finished, it will show fully charged icon.
Also, power charging RED indicator on unit will turn on.
This power unit is intended to be in a horizontal position.
Notes: Your battery will last longer if you follow these simple guidelines for caring for and storing it.
A
. For charging the first time, charge the device approximately 10 hours. For normal charging, the device
needs approximately a 5 hour charge.
B. Recharge and store the device within the temperature range of 5°C~35°C (40°F~95°F).
C. Do not overcharge (longer than 24 hours). Excessive charging or running the unit until battery goes empty
will damage battery. Battery life will be extended if you keep the battery fully charge.
D. Battery life naturally shortens slowly over time.
E. The rechargeable battery incorporated into this product is not user replaceable.
SD card
This device supports a SD Memory Card (Card not included). To increase memory size, insert a SD card into
the card slot on the side of unit as the figure below:
Notes:
A. Insert the card (Up to 32GB, not included) into the card slot on left side of unit with metal chip face down.
B. To take out the card, press the card until a “Click sound” is heard then pull out the card.
C. Before replacing the storage card, make sure the unit has been powered off.
D. When inserting the storage card, make sure the direction you select is correct. Never insert violently
to
avoid damaging the card or the unit. If the storage card doesn’t work, please check if
the direction is correct.
E. When the card is used for the first time, or it has been used in another device, please format it first
through the Computer. You also need to download the desired music, photos and/or movie onto the card
before installing into the unit
Important: Formatting the SD Card will delete all the data on the card. Download the data to
y
our
computer before formatting the card.

10
USB Ports (Full size USB port)
This device supports USB devices such as USB thumb Drive to increase the memory size and to read files,
simply insert the device into the USB port as indicated in above.
Notes:
A. Before replacing the USB DRIVER make sure the unit has been powered off.
B. When inserting the USB DRIVER, make sure the direction you select is correct. Never insert violently to
avoid damaging the USB driver or the unit. If it doesn’t work, please check if the direction is correct.
Power on/off the Device
A. Press and hold the Power On/Off button beside the keyboard to power on the unit
B. To save power of battery. Press the Power On/Off button or (Sleep) button to turn off the screen.
Press it again to turn the unit on.
C. To power off the device, press and hold the Power On/Off button until the sub-setting
menu appears
on the screen. Move the cursor to the Power off button and then click the left button. “Power off” menu will
appear, move the cursor to “OK” button then left click it.
Notes:
Like
y
our compute
r
, after turning on the Device,
y
ou may have to wait a short while to let the
operating s
y
stem boot up before the home page appears on the screen.
Touch Pad:
Touch the pad to move cursor on the screen as desired. Press the Left or Right button to do click action.
Reset:
If the device becomes abnormal, halts, freezes. Press the RESET Button.
RESET

11
Location of Controls
1. Front Camera
2. LCD panel
3. LED indicators (From Right to Left )
a: WIFI ON
b. Caps Lock
c. Num (Number) Lock
d. Power Charging Indicator
e. Power on Indicator
4. Build-in microphone
5. Power button
6. DC-IN Jack
7MiniHDMIPort
8. Keyboard
9. Two Full Size USB Ports
10 Headphone/Earphone Jack
11 Mic Jack
12 SD Card Slot
13. Touch Pad
14-15. Right & Left Buttons
16. Reset
17. Speakers
F (Function) Button’s assignment:
F1- Browser
F2-
Camera
F3- Sound -
F4- Sound +
F5- Air show
F6- Calculator
F7- Back Light -
F8- Back Light +
F9- File Browser
F10- Gmail
F11- Calendar
F12- Settings
Notes:
1. For F11 (F12), press the Fn and F9 (F10) buttons at
thesametime.

12
Connections
Connect to HDMI TV
A: Connect the device to a TV (with HDMI port) via the Mini HDMI jack on the side of the unit to the HDMI
port on the TV. (Connection cable not included).
B: The device will activate the HDMI connection automatically.
C: The tablets display content will show on TV.
Important: HDMI output operates in Video playback mode only.
Earphone / Headphone jack:
For private listening, connect an Earphone/Headphone to the Headphone jack on the left side of cabinet.
The speaker will cut off automatically (Earphone/Headphone not included).
Getting Started
On home page, click the" " button on the upper-right corner, the following picture will
appear on the screen:

13
Click the Settings ( ) button on the screen, the setting menu will appear on the screen, then:
Click on the screen and move Left of Right (Up or down) to show more selections.
Click the corresponding button you need to set. The sub-setting menu will appear on the screen,
follow on screen instructions.
WIRELESS &NETWORKS
To browse the web; connecting to apps store, use e-mail, Facebook, Twitter…you must connect this unit to
internet by Wi-Fi as below:
1. Click the Wi-Fi “OFF” button then slide it to the right to turn Wi-Fi ON, wait a few seconds, the available Wi-Fi
networks will appear.
2. Click the desired network to start connection as on screen instructions. (Maybe ask for password).
NB:
After setting, you can turn it ON or OFF by click the ( ) widget on the screen.
☆The device automatically scans and lists all local Wi-Fi Network found.
☆If your Wi-Fi network is set as hidden, it won’t be found by the auto scan. Click “ ” and follow the
prompts to add your network.

14
DISPLAY
Brightness: To adjust the screen brightness by moving the scaling bar.
TV screen resolution: To choose and set the resolution of the HDMI output to the TV
Wallpaper: To choose and set the wallpaper screen.
Sleep: To enable sleep mode and select time to sleep while not in operation.
Font size: To adjust the display Font Size.

15
DESKTOP
Status Bar
• The Status Bar lies at the bottom of the screen.
At the left side there are
•Below are some advises on how to operate the operation zone:
• By clicking the icon, you can get back to the previous screen.
•Byclicking the icon, you can get back to the homepage wherever interface you are in.
•Byclicking the icon, a window popup which shows the latest apps in operation.
•Byclicking the icon, conceal the Status Bar on the bottom of the screen.
At the right side there are
•The icon for Time
•The icon for sound level, click it to adjust sound level by moving the scaling bar.
•The icon for screenshot
•The icon for WIFI status
•The icon for Show battery status
• In the main menu interface, you can open and operate any app by clicking on the icons to run applications
such as Files Browser, Browser, My Music, as well as during web browsing or PDF viewing, you can drag the
menu, by pressing the navigation keys (Up, down, left, right arrows), to scrolling up and down the page as well
as to enable the page to move different directions respectively.

16
Application Management
Downloading AndroidTM Applications
☆Pre-loaded App stores, Google Play TM are providing many interesting and free applications for
downloads. Individual app store may ask for credit card information and personal details. Please be
caution that some application may require to pay.
Downloading Android Applications direct from a Website
You can download Android applications directly from websites, and then quickly and easily install them on your
device.
Click the Web application icon to launch the internet browser.
Enter the desired website URL, and click the download link for the application you want to install
on your device.
After the download is complete, click on the download file (in the Apps under setting screen), click Open
→Install.
Uninstalling Android Applications
You can also quickly and easily uninstall the Android applications that you have installed.
1. Click →Settings →Apps.
2. Click the application you want to uninstall, →Uninstall.
3. Click OK to confirm the Uninstall.
Clock
Click the Clock application icon. You can see the time and date.
Alarm:R
☆You can use your device as an alarm clock by setting multiple alarms.
This clock icon displayed at the LEFT bottom of screen, click to see one or more
Alarms have been set and are active.
Add Alarm
Click the Clock application icon.
Click to setup alarm →Click.to add alarm
Set up your alarm as desired (Input alarm time, touch “OK”)
Delete Alarm
Click the Clock application icon

17
Click icon to see one or more alarms have been set
Click and hold the alarm you want to delete.
Click
Video Conferencing
Skype can be downloaded from app stores - Google Play
**This device built-in front camera and microphone that allow video conferencing via Skype
BROWSER
Users can connect to the Internet through a browser.
Click the browser icon on the apps page , and then you can open the Web browser.
CALENDAR
Click the Calendar application icon.
For the first time using the Calendar, you need to add a Gmail account. Enter Gmail address and password.
Click “Next” and follow the prompts to complete the account configuration. Then you can use the Calendar.
(Note: In Account Set up screen, manual change the server for www. google.com)
Add Event
1. On the Calendar screen, click on the date to which you want to add an event.
2. Click on the event time, →click in each entry field to enter the desired event information.
3. Click Done.

18
Email;Gmail
Inside the apps menu, click the icon to enter the ‘Email/Gmail’ client. It’s required to configure
the account information for the first time. Pre-register and set up your email account is necessary. Please be
advised that Gmail account registration is necessary in order to access services provided by Google and
Android.
File Browser
Click the File Browser application icon to view the files on all storage devices (Local Disk, Micro SD
card, USB device), and to quickly & easily install Android application on your slimbook.
Use the icons across the top of the screen as follows:
Click the "GOTO" choose storage devices (SD,USB) to display the contents of your storage device
Click and hold in the folder/file you want to copy (Supports multiple folder/file selection) —click COPY
Click the "GOTO" choose storage devices (Local)

19
Click on the Local.--Select the folder which you want to copy the file.
Click Paste
Google Play Music
Using the pre-loaded “Play Music”Player to play audio files:
☆Audio file formats supported: MP3
The “Play Music” player will automatically load the music files from the SD/USB/Local Disk to the playlist after
turning on the “Play Music” player.

20
Frequently Asked Questions
Android
Q: What Android OS version is on my Device?
A: Android 4.2,Jelly Bean (Upgradable to 4.4 Kitkat)
Basic Device Functionary
Q: Do I have to charge the battery before use?
A: You should charge the battery for at least 5 hours, but you can use the device while it’s charging.
Use the included power adapter to charge; this device charge via DC in jack
Email
Q: Can I use any of my personal email addresses to send/receive email?
A: The device supports POP3 and SMTP accounts. Some free email accounts are not supported on
mobile devices. Check with your email provider to see if your account is supported.
Media Cards
Q: Which media cards are compatible with my Device?
A: SD cards.
Music
Q:HowdoIaddmusicfilestomydevice?
A: Copy the music files from your computer onto a SD card or USB storage device, and then use the
File Browser application to copy the files into the device.
Photos
Q: How do I add photo files to my device?
A: Copy the photo files from your computer onto a SD card or USB storage device, and then use the
File Browser application to copy the files into the device.
Video
Q: Can I play YouTube TM videos on my device?
A: Yes. You can click the YouTube TM application icon to quick access videos.
Q: How do I add video files to my device?
A: Copy the video files from your computer onto a SD card or USB storage device, and then use the
File Browser application to copy the files into the device.
Wi-Fi
Q: Do I need a Wi-Fi adapter to connect to the Internet?
A: No. The Wi-Fi adapter is built-in to the device.
OtherApplications on Home Page
Email , Gmail:
Click intoe-mail settings, after entering the email address and password, simply follow the on screen
instructions for set up. This application supports IMAP mail (such as Hotmail , Gmail and Yahoo Mail,
POP3 mail and Exchange). Click Menu button on screen to choose and remove email account
Google Play Music:
Click icon to access music .The list of artists, albums, songs, playlist, etc. will appear on the screen. Click
the desired music file to start playing.
Table of contents
Languages: