Creative Play QUARTER MASTER User manual

QUARTER MASTER
Installation Instructions
REF: VOY122 - QUARTER MASTER
pg 1 of 48
VOY123 - THE CAPTAIN VOY121 - FIRST MATE

pg 2 of 48 REF: VOY122 - QUARTER MASTER
PARTS requiredPARTS required
x1 STARBOARD (BOW PANEL)
x1 VOY121-B3 (ASSEMBLY)
x1 FRONT (BOW PANEL)
x1 STAIRS (BOW)x1 PORTSIDE (BOW PANEL)
BOW Timbers
BOW Pre-assembled parts
3
VOY121-B
ASSEMBLY
CODE TYPE SIZE QTY
VOY121-B1 90x90 2700 1

pg 3 of 48 REF: VOY122 - QUARTER MASTER
PARTS requiredPARTS required
BOW fixings
x2 (M12 NYLOCS)
x1 (M12 x 120* CUP SQUARE BOLTS)
x1 (M12 x 130* CUP SQUARE BOLTS)
x9 (FM80 WOOD SCREWS)
x12 (FM180 WOOD SCREWS)
x2 (COVERED END)
ENTRY ‘OPEN FRONT’ Pre-assembled parts
x1 PORTSIDE (ENTRY PANEL) x1 STARBOARD (ENTRY PANEL)
ENTRY ‘OPEN FRONT’ fixings
x2 (FM80 WOOD SCREWS)

pg 4 of 48 REF: VOY122 - QUARTER MASTER
PARTS requiredPARTS required
M9
M2
M9
M1
M2
M2
M5
M6
VOY122-M
VOY122-M
VOY122-M
VOY122-M
VOY122-M
M3
M3
M4
M4
M5
VOY122-M
VOY122-M
VOY122-M
VOY122-M
VOY122-M
MAIN DECK Timbers
M10
M11
M11
M11
M11
M10
M10
VOY122-M
LADDER ASSEMBLY
GANGPLANK ASSEMBLY
MAIN DECK Pre-assembled parts
x1 PANELa (MAIN DECK) x1 PANELb (MAIN DECK) x2 PANELc/f (MAIN DECK)
PANELf
PANELc

pg 5 of 48 REF: VOY122 - QUARTER MASTER
MAIN DECK Pre-assembled parts
x1 PANELd (MAIN DECK) x1 PANELe (MAIN DECK)
PARTS required
x1 1.0m SLIDE (MAIN DECK) x2 GANGPLANK (MAIN DECK)
x1 LADDER (MAIN DECK) x1 GANGPLANK (MAIN DECK NET)

pg 6 of 48 REF: VOY122 - QUARTER MASTER
MAIN DECK Pre-assembled parts
PARTS required
MAIN DECK Fixings
x1 FLAG (MAIN DECK) x1 FLAG (MAIN DECK) x1 TRIM ‘COVERS’ (MAIN DECK)
Portside
Starboard
x13 (M12 NYLOCS)
x4 (M10 NYLOCS)
x8 (M12 x 200* CUP SQUARE BOLTS)
x2 (M12 x 230* CUP SQUARE BOLTS)
x3 (M12 x 290* CUP SQUARE BOLTS)
x76 (FM80 WOOD SCREWS)
x8 (FM120 WOOD SCREWS)
x17 (COVERED END)
x8 (Polyfix halves) INC POLYFIX HALF
SCREWS

pg 7 of 48 REF: VOY122 - QUARTER MASTER
STERN Timbers
PARTS required
S3
S4a
S5a
S1
S1
S5b
S4b
S6b
S2
S6a
S10b
S13
S10a
VOY121-S
VOY121-S
VOY121-S
VOY121-S
VOY121-S
VOY121-S
VOY121-S
VOY121-S
VOY121-S
PANELc ASSEMBLY
PANELh ASSEMBLY
PANELh ASSEMBLY
PANELc ASSEMBLY
PANELc ASSEMBLY
NOT REQUIRED
STERN Pre-assembled parts
x1 PANELb (STERN) x1 PANELa (STERN) x1 PANELc (STERN)

pg 8 of 48 REF: VOY122 - QUARTER MASTER
STERN Pre-assembled parts
PARTS required
x1 PANELg (STERN)
x1 PANELi / PANELj (STERN)
x1 PANELf (STERN) x1 PANELh (STERN)
x1 1.0m SLIDE (STERN)
PANELi
PANELj
STERN
STERN
REAR
REAR
x1 SHIPS WHEEL x2 FLAG (STERN)
PortsideStarboard

pg 9 of 48 REF: VOY122 - QUARTER MASTER
STERN Pre-assembled parts
PARTS required
x1 NET CLIMBER (STERN)
STERN Fixings
x1 END COVER (STERN)
x18 (M12 NYLOCS)
x8 (M12 x 120* CUP SQUARE BOLTS)
x6 (M12 x 130* CUP SQUARE BOLTS)
x1 (M12 x 200* CUP SQUARE BOLTS)
x92 (FM80 WOOD SCREWS)
x18 (COVERED END)

pg 10 of 48 REF: VOY122 - QUARTER MASTER
PARTS required
HEXA GRIP
STERN-H1
STERN-H2
STERN-H3
BOW-H1 BOW-H2
MAIN DECK -H1 MAIN DECK -H2

pg 11 of 48 REF: VOY122 - QUARTER MASTER
PARTS required
INDIVIDUAL ROPES
GUARD ROPE
RIGGING ROPERIGGING ROPE
2
1
RR
RR
ADDITIONAL Fixings
x4 (M12 NYLOCS)x6 (FM80 WOOD SCREWS)
x7 (FM120 WOOD SCREWS)
x6 (FM180 WOOD SCREWS)
x4 (6x80 RAPID DRIVE SCREWS)
x5 (COVERED END)

pg 12 of 48 REF: VOY122 - QUARTER MASTER
TOOLS required

pg 13 of 48 REF: VOY122 - QUARTER MASTER
FOUNDATION Details
DATUM POINT
Notes:
1) DATUM POINT
Foundation measurements will be taken from the DATUM POINT - this is labelled as DP
2) GROUND LEVEL
All measurements for DEPTHS and HEIGHTS are taken from FINISHED GROUND LEVEL - this is labelled as FGL
3) SLIDE OUTLINES
The slide ‘OUTLINE’ has been included on some views to help highlight the orientation of the area
4) DIRECTION OF HOLES
Ensure any PRE DRILLED HOLES are positioned as shown - Dashed lines show holes going in the opposite direction
0,0 X
Y 1055mm
1055mm
Y axis dimensions will be shown HORIZONTAL
X axis dimensions will be shown VERTICAL
Foundation Sizes
SHARED
Use a foundation of 500mm x 400mm
when a post SHARES the same hole
STANDARD
Use a standard 400mm x 400mm
foundation for ‘standard’ upright
posts
ANGLED
Use a 500mm x 400mm Foundation
for angled posts - ENSURE 500mm
starts from the timber edge (rather
than centre of the post)

pg 14 of 48 REF: VOY122 - QUARTER MASTER
POST LOCATIONS
PLAN VIEW
SIDE VIEW
FOUNDATION Details
DP
S10a
S10b
M6
M2
M2
M9
M1
M2
M3 M3
S4b
S5a
B1
M4 M4
S5b
S4a
S13
STAIRS
S10a
S10b
S4b
S5a
S5b
S4a
S13
M1
M2
M6
M2
M9
M2
M3
M9
M3
M4 M4
B1
FGL
0,0 X
Y1055mm
1055mm

pg 15 of 48 REF: VOY122 - QUARTER MASTER
FOUNDATION Details
ADDITIONAL ITEMS
NET CLIMBER
NET CLIMBER
1.0m SLIDE
1.0m SLIDE
LADDER
LADDER1.0m SLIDE
FGL
NOTES:
The NET GROUND ANCHOUR needs to sit
5-10mm below FINISHED GROUND LEVEL
DP
DATUM POINT
0,0 X
Y1055mm
1055mm

pg 16 of 48 REF: VOY122 - QUARTER MASTER
- 2097- 2097
7962
7677
5275
4978
1341
845
3912
3663
1682
2629
0
46724672
0
845
4582
2070
2624
4646
3674
2624
926
926
0
0
NOTES:
The stern slide ‘OUTLINE’ has been included to help highlight the orientation of the area
OVERALL AREA - DATUM POINT
0,0 X
Y1055mm
1055mm
= MINIMUM SPACE
= SURFACE AREA
SURFACING Details
DP

pg 17 of 48 REF: VOY122 - QUARTER MASTER
Installation Instructions
Instructions will be split between:
BOW / ENTRY (Open Front) / MAIN DECK / STERN
SECTION 1 - BOW ASSEMBLY
Position the BOW PANELS - Starboard / Portside
DRY INSTALL - Do not concrete posts until the full assembly is complete
Ensure
The PANELS are positioned 30mm above
FINISHED GROUND LEVEL
1
FGL

pg 18 of 48 REF: VOY122 - QUARTER MASTER
Installation Instructions
Attach the BOW main floor assembly
Using 4 x FM180 WOOD SCREWS
Ensure LOCATION HOLES line up
Circled BELOW RIGHT - these holes are to locate assembly only
2
3
3
VOY121-B
ASSEMBLY
Notes
Screw either side of the LOCATION HOLES

pg 19 of 48 REF: VOY122 - QUARTER MASTER
Installation Instructions
Attach the FRONT panel to the VOY121-B1 timber
Using 1 x M12x130 CUP SQUARE BOLT / 1 x M12 x 120 CUP SQUARE BOLT / 2 x M12 NYLOCS / 1 x COVERED END
Position & attach the FRONT assembly
Using 1 x FM80 WOOD SCREW
4
5
M12x130 CUP SQUARE BOLT
M12x120 CUP SQUARE BOLT
COVERED END
NOT REQUIRED

pg 20 of 48 REF: VOY122 - QUARTER MASTER
Installation Instructions
Attach the HEXA GRIP BOW-H2
Using 4 x FM 80 WOOD SCREWS
Attach the STAIRS
Using 4 x FM 180 WOOD SCREWS
6
7
Notes
The TOP STEP marked red - needs to sit 18mm above
the face of the timber - this will level with the HEXA
GRIP FLOOR