Creative Play S111-R User manual

BASKET SWING ROUND
Installation Instructions
REF: S111-R - BASKET SWING ROUND
pg 1 of 7

pg 2 of 7 REF: S111-R - BASKET SWING ROUND
PARTS required
x6 (M12 ‘NYLOC’)
x1 (TOP LOG)
x4 (LEG LOG)
x6 (end caps R60) x6 (M12 x 310 Square Cup HEX bolt)
TOOLS required
x8 (nut caps M8)
x2 (500mm CHAIN)
S101R1
x1 (BASKET SEAT inc chain)
x2 (Quicklink)

pg 3 of 7 REF: S111-R - BASKET SWING ROUND
Foundation Details
Concrete
Timber support post
finished ground level
Soil

pg 4 of 7 REF: S111-R - BASKET SWING ROUND
Surfacing Details
= SYNTHETIC
= LOOSE FILL

pg 5 of 7 REF: S111-R - BASKET SWING ROUND
Build the SWING FRAME
Using (6x 310mm) M12 - square cup bolt / 6x NYLOCS / 6x Covered end cap R60
1
ENSURE:
TIMBERS ARE ATTACHED AS SHOWED ABOVE
OUTSIDE TIMBERS
Installation Instructions
S101R1
S101R1
S101R1 S101R1

pg 6 of 7 REF: S111-R - BASKET SWING ROUND
Install Assembly
Follow Fundation details
Install BASKET SWING & SAFETY CHAIN
Using Chain and Quicklink supplied
2
3
Installation Instructions
LOCK TIGHT
to ensure the
quicklink remains
CLOSED

pg 7 of 7 REF: S111-R - BASKET SWING ROUND
Additional Dimensions
Min 400mm - Max 600mm
Recomended 400mm