Creative Play SANDHUT MINOR User manual

SANDHUT MINOR
Installation Instructions
REF: SB102 - SANDHUT MINOR
pg 1 of 13

pg 2 of 13
REF: SB102 - SANDHUT MINOR
PARTS requiredPARTS required
x2 (PRE-ASSEMBLED SIDE A) x1 (PRE-ASSEMBLED SIDE B)
x1 (PRE-ASSEMBLED SIDE C)
x2 (HEX SLATS)
x1 (PLAYTEC PANEL - SIDE C)
x1 (HEX STEP)

pg 3 of 13
REF: SB102 - SANDHUT MINOR
PARTS requiredPARTS required
x6 (FM180 ‘ Brass screws’)
x40 (FM80 ‘ Brass screws’)
x1 (PRE-ASSEMBLED FLOOR) x1 (HEX LID)
x2 (STEP PLAYTEC CAPS) x2 (STEP TIMBERS - SB102b)

pg 4 of 13
REF: SB102 - SANDHUT MINOR
PARTS required ( STANDARD ROOF )
x8 (ROOF CLIPS)
x1 (TOP ROOF CLIP) x2 (SIDE ROOF )
x1 (FRONT ROOF) x1 (BACK ROOF)
PARTS required (RUSTIC ROOF )
x4 (TOP RUSTIC ROOF)
x20 (HALF ROUND TIMBERS)
x2
x2
RR3
RR2
RR2
RR2
RR1
RR1
x10 (N1 - TORKTAINER)
x10 (3B- TORKTAINER) x4 (FM80 ‘ Brass screws’)
x64 (FM80 ‘ Brass screws’)
x2 LEFT (SIDES RUSTIC ROOF)
x2 RIGHT (SIDES RUSTIC ROOF)

pg 5 of 13
REF: SB102 - SANDHUT MINOR
TOOLS required
TIMBERS required
SB102a
SB102a SB102a
SB102a

pg 6 of 13
REF: SB102 - SANDHUT MINOR
Foundation Details
TIMBER SUPPORT POST
CONCRETE
SOIL
FINISHED GROUND LEVEL
450 150
600

pg 7 of 13
REF: SB102 - SANDHUT MINOR
Attach SIDES A AND B to UPRIGHTS
Using FM80 BRASS WOOD SCREWS
ENSURE:
EACH SIDE IS FLUSH WITH FLOOR - NO GAPS
ENSURE THAT THEY ARE ALL LEVEL WITH EACH OTHER ALSO
2
Installation Instructions
Install the timbers SB102a
Follow foundation details
1
Installation Instructions
SB102a
SIDE A
SIDE A
SIDE B
SB102a SB102a
SB102a

pg 8 of 13
REF: SB102 - SANDHUT MINOR
INSERT PRE-ASSEMBLED FLOOR
NO NEED TO FIX IN PLACE
4
Installation Instructions
Attach PLAYTEC PANEL to PRE-ASSEMBLED SIDE C and
Attach TO UPRIGHTS - as step 2
Using FM80 BRASS WOOD SCREWS
3
Installation Instructions
SIDE C

pg 9 of 13
REF: SB102 - SANDHUT MINOR
SCREW ON 2ND STEP TIMBER TO EXISTING and CAP EACH END
Using FM180 BRASS WOOD SCREWS for the step and FM80 BRASS WOOD SCREWS for the caps
6
Installation Instructions
ATTACH 1 x STEP TIMBER TO MAIN STRUCTURE
Using FM180 BRASS WOOD SCREWS
5
Installation Instructions

pg 10 of 13
REF: SB102 - SANDHUT MINOR
Installation Instructions
ATTACH HEX STEP PANEL ON TOP OF TIMBERS
ENSURE YOU SECURE LEAVING NO GAP BETWEEN PLAYTEC SIDE AND HEX - Using FM80 BRASS WOOD SCREWS
7
Installation Instructions
TIP!
LAY THE HEX LID ON TOP BEFORE
SCREWING SLATS INTO PLACE TO
ENSURE THEY ARE SNUG WITH THE LID,
HOLDING IT PLACE WHEN ON.
8Attach HEX SLATS ON TOP OF SIDE B and C
Using FM80 BRASS WOOD SCREWS

pg 11 of 13
REF: SB102 - SANDHUT MINOR
Attach the roof Parts (NORMAL ROOF)
Using ‘TORKTAINERS’ and ‘Brass Screws’
9
Installation Instructions
1
2
a
3
4
5

pg 12 of 13
REF: SB102 - SANDHUT MINOR
Attach the roof Parts (RUSTIC ROOF)
Using ‘Brass Screws’
9
Installation Instructions
2
3
4
1
QTYx2
Both Sides
b

pg 13 of 13
REF: SB102 - SANDHUT MINOR
Additional Dimensions
1.33m 1.37m
2.23m
0.4m