Crosley CR7010A User manual

CR7010A
Ridgemont Entertainment System
Instruction Manual
Questions, problems, missing parts?
Before returning to the store, call Customer Service
8 a.m. –6 p.m., EST, Monday –Friday
1-888-CROSLEY
www.crosleyradio.com

English
2
Safety Instructions
Read and understand this entire manual before using this product. Keep these
instructions for future reference.
1. Do not use this product near water.
2. This product should be operated only by the type of power source indicated
on the marking label or in this instruction manual.
3. Do not defeat the safety purpose of the polarized plug. A polarized plug has
two blades with one blade wider than the other. This plug will fit into the
power outlet only one way. If you are unable to insert the plug fully into the
outlet try reversing the plug. If the plug should still fail to fit, contact your
electrician.
4. Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the product.
5. Do not overload wall outlets, extension cords, or integral convenience
receptacles as this can result in a risk of fire or electric shock.
6. Never push objects of any kind into this product through openings as they
may touch dangerous voltage points or short-out parts that could result in a
fire or electric shock. Never spill liquid of any kind on the product.
7. Do not attempt to service this product yourself as opening or removing
covers may expose you to dangerous voltage or other hazards. Refer all
servicing to qualified service personnel.
8. Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
9. Do not use attachments not recommended by the product manufacturer as
they may cause hazards.
10. A product and cart combination should be moved with care. Quick stops,
excessive force, and uneven surfaces may cause the product and cart
combination to overturn.
11. Slots and openings in the cabinet are provided for ventilation and to ensure
reliable operation of the product and to protect it from overheating. Do not
block or cover these openings.
12. Unplug the product during lightning storm or when unused for long periods of
time.

English
3
Items in this package
Before throwing away any packaging materials, please check thoroughly and
make sure you find the following items that come along with this package:
Turntable
Remote
Power plug
Please contact Crosley customer service if there is any accessory missing from
the package. Retain the original packaging materials for exchange or return
purposes.
Specifications
Power AC power adapter, DC output 12V 1.6A
Power consumption 19.2 W
Speaker 5W X 2
Turntable Speed 33 1/3, 45, 78 RPM
Replacement Needle Crosley NP-6
Note:
Design and specifications are subject to change without notice.
To help save power consumption, some models will comply with ERP energy
saving standard. When there is no audio input for 20 minutes, their powers will
automatically cut-off. To turn power back on and resume playing, you will need to
turn off the power and turn it on again.

English
4
Product Description
1. Dust Cover
2. LCD Screen
3. Bluetooth Indicator
4. Cassette Door
5. Record Button
6. Play Button
7. Rewind Button
8. Fast Forward Button
9. Stop/Eject Button
10.Pause Button
11.CD Tray
12.Aux In Jack
13.Headphone Jack
14.CD Door Open/Close Button

English
5
15.AM Button
16.FM Button
17.Mute Button
18.Random Button
19.Program Button
20.Repeat Button
21.Play/Pause Button
22.Phone/Aux Button
23.Stop Button
24.CD Button
25.Backward Skip Button
26.Forward Skip Button
27.Bluetooth Button
28.Tape Button
29.On/Off-Volume Knob
30.Tuning Knob

English
6
31.Turntable Spindle
32.Turntable Platter
33.Turntable Suspension Screw
34.Tonearm Lever
35.Hold Down Clip
36.Speed Switch
37.Tonearm Rest
38.Tonearm
39.RCA Jacks
40.FM Wire Antenna
41.Power Jack

English
7
Remote Control
42.Program Button
43.Repeat Button
44.Mode Button (FM-AM-Phone/Aux-
CD-Bluetooth-Tape)
45.Mute Button
46.Play Pause Button
47.Random Button
48.Stop Button
49.Backward Skip Button
50.Forward Skip Button
51.Folder Up Button
52.Folder Down Button
Initial Setup
Essential Setup
1. Place the unit on a flat and level surface. The selected location should be
stable and free from vibration.
2. Remove the tie-wrap that is holding the tonearm.
3. Rotate the Turntable Suspension Screw clockwise to allow the turntable to
float on its shock absorbers.
4. Connect AC adaptor to the Power Jack of the unit.
Note: Do not plug the AC power adaptor to power outlet before all the assembly is
completed. Before turning the power on, make sure again all the connection settings
are correct. Always turn off the power when connecting or disconnecting.

English
8
Stereo System Connection
RCA Jacks
The RCA Jacks output analog line-level signals and could be connected
directly with a pair of active/powered speakers or the appropriate input of your
stereo system.
The Red plug connects with the Right channel and the White plug connects
with the Left channel.
Note: The RCA Jacks are not designed to be connected directly to the passive/unpowered
speakers. If connected to the passive speakers, the volume level will be very low.
Aux Input Connection
You can connect an audio device to this unit and play your music through its
speakers. To do this, Press the Phone/AUX button to set to Aux In mode,
connect the 3.5mm auxiliary cable between your audio device and the Aux In
Jack of this unit and start playing.
Note: The aux in connection will automatically override the turntable function. To resume
using the turntable function, unplug the auxiliary cable from the aux in jack.
Turntable Operation
1. Rotate the On/Off Volume Knob to turn on the power.
2. Press the Phono/AUX Button to set the unit to Phono mode.
3. Set the Speed Switch accordingly.
4. Place the record on the turntable. Use the 45 RPM Adapter if necessary.
5. Remove the stylus protector from the stylus assembly.
Note: To avoid stylus damage, make certain the included stylus guard is in place
whenever the turntable is being moved or cleaned.
6. Release the tonearm Hold Down Clip.
Note: when the turntable is not in use, remember to lock back hold down clip.
7. Use the Tonearm Lever to lift up the tonearm.
8. Gently move the tonearm over the record where play is desired to begin. Set
the Tonearm Lever back to the down position, the tonearm will descend
slowly onto the record and begin to playback.
9. When the record is finished playing, the tonearm will automatically return to
its rest. Or to suspend the playback, use the Tonearm Lever again to raise
the tonearm and return it to the Tonearm Rest. Release the lever to lower the
tonearm back to its rest.
10.Lock the Tonearm Clip to secure the tonearm.

English
9
Needle Replacement
Removing Needle
1. Gently pull down the front edge of the needle.
2. Pull needle forward.
3. Pull out and remove.
Installing Needle
1. Position the needle with its tip facing down.
2. Line up the back of the needle with the cartridge.
3. Insert the needle with its front end at a downward angle and gently lift the
front of the needle upward until it snaps into place.
Radio Operation
1. Rotate the On/Off Volume Knob to turn on the power.
2. Press the AM Button or FM button to the desired band
3. Rotate the Tuning Knob for desired radio station.
Note:
The unit is equipped with a FM wire antenna. To FM improve reception, move the
wire around until the reception is clear without interferences. Do not connect the wire
to any additional antenna.
The AM antenna is built inside the unit. If AM reception is poor, try to rotate the unit
for better reception.

English
10
Bluetooth Operation
1. Rotate the On/Off Volume Knob to turn on the power.
2. Press the Bluetooth button to set the unit to Bluetooth mode, you will hear
an activation sound from the unit.
3. Turn on the Bluetooth feature of your audio device, search for “Crosley
CR7010” and pair.
4. Once your device is successfully paired with the unit, you will hear a short
confirmation sound from the unit.
5. Play and stream music from your device to the unit.
Note: Bluetooth version - *4.1*
CD Playback Operation
1. Rotate the On/Off Volume Knob to turn on the power.
2. Press the CD Button to set the unit to CD mode.
3. Press the Open/Close button to open the CD tray and put the CD in the tray
with the labeled side facing up.
4. Press the Open/Close button again to close the tray. The LCD display will
show “--“ for a few seconds, then the total number of tracks on the CD. If it is
a blank CD or an unrecognizable CD, it will show “00”.
5. Press the Play/Pause button to start the playback.
6. During the playback, press the Play/Pause button to pause. Press it again to
resume playback.
7. To skip to the next or previous track, press the Forward Skip or Backward
Skip button correspondingly
8. To search fast forward or backward a track, press and hold the Forward Skip
or Backward Skip button correspondingly until you reach the desired time.
Release the button and the playback will resume.
9. To repeat a specific track, press Repeat button once while that track is
playing. To repeat all the tracks, press the Repeat button twice. To cancel
repeat function, press the Repeat button.
10.Press the Stop button if you want to completely stop playback.
Programmed Playback
1. Before starting the playback, press the Program button once to enter
program mode. Program Indicator will start flashing. The LCD display will
flash “01” as the track sequence which is to be edited.
2. Press the Forward Skip or Backward Skip buttons to select the desired
track that you would like to play. The LCD’s number will turn steady
instead of flashing, showing the sound track number at selection.

English
11
3. Press the Program button to confirm the selected track. The LCD’s
number will start flashing again showing the next track sequence which is
to be edited.
4. Repeat steps 2 & 3 for additional sound tracks that you would like to play.
The tracks can be in any number and repeated. A maximum of 20 tracks
can be programmed at one time.
5. Press Play/Pause button to start the programmed playback. The tracks
will play in the same sequence that you programmed earlier.
6. To exit the program mode, press the Stop button twice and the Program
Indicator will be off.
Folder/Album Playback
If your MP3 CD is separated into folders, follow the steps below to access the
folders.
1. While the CD is stopped, press the Folder Up or the Folder Down buttons on
the remote to advance forward or backwards through the folders on your disc.
2. Once the desired folder is reached, use the Forward Skip or the Backward
Skip buttons to select the desired track.
3. Press the Play button to begin playback of the selected track.
Cassette Operation
1. Rotate the On/Off Volume Knob to turn on the power.
2. Press the Tape button to set the unit to Tape mode.
3. Set the Function Switch to TAPE position.
4. Insert the prerecorded cassette into the cassette tray, and press the Play
button.
5. To fast forward, press the Fast Forward button in. To stop fast forwarding and
return to the playback mode, press the Play button.
6. To rewind, press the Rewind button in. To stop rewinding and return to the
playback mode, press the Play button.
7. To stop the playback, press the Stop/Eject button once. To eject the cassette,
press the Stop/Eject button again.
Note: Remove the cassette from the cassette holder when it is not in use.

English
12
Recording
RADIO to TAPE
1. Press the AM Button or FM button to the desired band.
2. Insert a cassette tape, and press the RECORD and PLAY button to record
the sounds from the radio.
Note: To prevent accidental recording, break off the cassette tab from side A or B.
3. To pause recoding, press the Pause button. Press it again to resume
playback.
4. To stop recording, press the Stop/Eject button.
CD to TAPE
1. Press the CD button to set the unit to CD mode.
2. Insert and play a CD.
3. Insert a cassette tape, and press the RECORD and PLAY button to record
the sounds from the CD.
Note: To prevent accidental recording, break off the cassette tab from side A or B.
4. To pause recoding, press the Pause button. Press it again to resume
playback.
5. To stop recording, press the Stop/Eject button.

English
13
PHONO to TAPE
1. Press the Phono/AUX/ button and set the unit to phono mode.
2. Lower the tone arm to start playback of the record.
3. Insert a cassette tape, and press the RECORD and PLAY button to record
the sounds from record.
Note: To prevent accidental recording, break off the cassette tab from side A or B.
4. To pause recoding, press the Pause button. Press it again to resume
playback.
5. To stop recording, press the Stop/Eject button.
Bluetooth to TAPE
1. Press the Phono/AUX/ button and set the unit to Bluetooth mode.
2. Turn on the Bluetooth feature of your audio device, search for “CROSLEY
CR7014A” and pair.
3. Play and stream music from your device to the unit.
4. Insert a cassette tape, and press the RECORD and PLAY button to record
the sounds from the Bluetooth device.
Note: To prevent accidental recording, break off the cassette tab from side A or B.
5. To pause recoding, press the Pause button. Press it again to resume
playback.
6. To stop recording, press the Stop/Eject button.

English
14
AUX IN to TAPE
1. Connect the 3.5mm auxiliary cable between your audio device and the Aux In
Jack of this unit
2. Press the Phono/AUX/ button to set to Aux In mode, and start playing.
3. Insert a cassette tape, and press the RECORD and PLAY button to record
the sounds from your audio device
Note: To prevent accidental recording, break off the cassette tab from side A or B.
4. To pause recoding, press the Pause button. Press it again to resume
playback.
5. To stop recording, press the Stop/Eject button.
FCC Statements
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into a circuit different from that to which the receiver is
connected.
Consult the dealer or an experienced radio TV technician for help.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may
cause undesired operation.

CR7010A
Ridgemont Centro de entretenimiento
Manual de instrucciones
¿Tiene preguntas, ha tenido problemas o hay piezas faltantes?
Antes de devolver el producto a la tienda, comuníquese con nuestro Servicio al
Cliente
de 8 a. m. a 6 p. m., hora del este, de lunes a viernes
1-888-CROSLEY
www.crosleyradio.com

Spanish
2
Instrucciones de seguridad
Lea y comprenda este manual en su totalidad antes de usar este producto.
Conserve estas instrucciones para consultarlas en el futuro.
1. No use este producto cerca del agua.
2. Este producto debe ser utilizado solo con el tipo de fuente de alimentación
indicado en la etiqueta o en este manual de instrucciones.
3. No subestime el propósito de seguridad del enchufe polarizado. Un enchufe
polarizado posee dos hojas; una de ellas es más ancha que la otra. Este
enchufe encajará en el tomacorriente en un solo sentido. Si no logra insertar
completamente el enchufe en el tomacorriente, pruebe invirtiendo el
enchufe. Si aun así el enchufe no encaja, comuníquese con su electricista.
4. Proteja el cable de alimentación de ser pisado o pinzado, en especial en los
enchufes, los tomacorrientes y en el punto donde el cable sale del producto.
5. No sobrecargue los tomacorrientes de pared, cables de alargue, o
receptáculos integrales, ya que puede generar un riesgo de incendio o
descarga eléctrica.
6. No introduzca objetos de ningún tipo en el producto a través de las ranuras,
ya que pueden hacer contacto con puntos de alto voltaje o provocar un
cortocircuito que ocasione fuego o una descarga eléctrica. No derrame
líquidos de ningún tipo sobre el producto.
7. No intente realizar tareas de mantenimiento por su cuenta, ya que abrir o
remover la cubierta puede exponerlo a un voltaje peligroso y a otros riesgos.
Deje toda tarea de mantenimiento en manos de un técnico de servicio
calificado.
8. Los cambios o las modificaciones que no tengan la aprobación expresa de
la parte responsable del cumplimiento pueden anular el permiso del usuario
para utilizar el equipo.
9. No utilice accesorios que no son recomendados por los fabricantes del
producto porque pueden ser peligrosos.
10. Cualquier combinación de carro y producto debe moverse con cuidado. Las
paradas súbitas, el uso de fuerza excesiva y las superficies irregulares
pueden causar que el producto y el carro se vuelquen.
11. Las ranuras de ventilación y las aberturas del gabinete sirven para ventilar y
asegurar el correcto funcionamiento del producto y evitar el recalentamiento.
No bloquee ni cubra estas aberturas.
12. Desconecte el producto durante las tormentas eléctricas o cuando no se
utilice durante largos períodos de tiempo.

Spanish
3
Artículos en este empaque
Antes de deshacerse de cualquier material del empaque, revíselo con atención y
asegúrese de encontrar los siguientes artículos que se incluyen en este paquete:
Tocadiscos
Control remoto
Enchufe de alimentación
Comuníquese con el Servicio al Cliente de Crosley en caso de que faltara algún
accesorio en el empaque. Conserve el material de embalaje original para
realizar cambios o devoluciones.
Especificaciones
Fuente de energía Transformador de CA, salida CC de 12 V 1.6 A
Consumo de energía 19.2 W
Potencia del altavoz 5W x 2
Altavoz 331/3, 45, 78 RPM
Aguja de repuesto Crosley NP-6
Nota:
El diseño y las especificaciones están sujetos a cambios sin previo aviso.
Con el fin de ahorrar en el consumo de energía, algunos modelos cumplirán con
el estándar de ahorro de energía ERP (productos relacionados con la energía).
En el caso de que no se produzca la entrada de audio durante 20 minutos, estos
equipos se desactivarán automáticamente. Para volver a encenderlos y reanudar
la reproducción, deberá apagar la unidad primero y luego volver a encenderla.

Spanish
4
Descripción del producto
1. Cubierta para polvo
2. Pantalla LCD
3. Indicador de Bluetooth
4. Puerta para casete
5. Botón de grabación
6. Botón de reproducción
7. Botón de rebobinado
8. Botón de avance rápido
9. Botón de
detención/expulsión
10. Botón de pausa
11. Bandeja para CD
12. Conector de la entrada
auxiliar
13. Conector de auriculares
14. Botón de apertura/cierre de
la puerta para CD

Spanish
5
15. Botón de banda AM
16. Botón de banda FM
17. Botón de silencio
18. Botón aleatorio
19. Botón de programación
20. Botón de repetición
21. Botón de
reproducción/pausa
22. Botón Teléfono/auxiliar
23. Botón de detención
24. Botón CD
25. Botón de salto hacia atrás
26. Botón de salto hacia delante
27. Botón Bluetooth
28. Botón Cinta
29. Perilla de volumen y
encendido/apagado
30. Perilla de sintonización

Spanish
6
31. Eje del tocadiscos
32. Bandeja del tocadiscos
33. Tornillo de suspensión del
tocadiscos
34. Palanca del brazo
35. Broche de sujeción
36. Interruptor de velocidad
37. Soporte del brazo del
tocadiscos
38. Brazo del tocadiscos
39. Conectores RCA
40. Antena de hilo de FM
41. Conector de alimentación