Crux A/V Series User manual

CHRYSLER
2016 300
DODGE
2014 –2015 Durango
JEEP
2014 –2015 Grand Cherokee
RAM
2014 –2016 1500
2014 –2016 2500
2014 –2016 3500
NOTES:
1) Not compatible with iOS devices with iOS12 and up.
2) Not compatible with diesel powered RAM trucks.
- Provides a composite A/V input to the factory radio.
- Includes HDMI to composite adaptor cable for smartphone mirroring.
- Plug and Play Installation
- Vehicle must have factory audio AUX input.
- Not compatible with Navigation radios.
AVICH-03 CAN MODULE
AVICH-03 Harness
AVICH-03 VIM MODULE
VCIP5 HDMI Conversion Cable
1 / 3
rev.113018

1. Remove the factory radio from the dashboard and unplug the connectors behind the radio.
2. Mate the T-Harness connections to the factory connectors. (Make sure all connectors are properly
seated into the interface and into the radio.)
3. On the CAN Module, set DIP switch #4 to ON to enable the AV Input.
4. Connect the audio and video source to the female RCAs on the AVICH-03 T-Harness.
5. Switch to the new AV input by pressing the BACK button on the radio or the middle button on the
steering wheel controls behind the left side of the steering wheel. (See page 3) (If the radio does
not have a BACK button use the GREEN wire option to toggle the AV source by connecting it to
+12V. We recommend using a toggle switch to use this feature.)
6. Test the system before putting back the radio.
Make sure the DIP#4 is set to the ON position. This sets the programming to the vehicle.
NOTES:
1. Set DIP#6 to ON if you experience the radio freezing or not responding properly.
2 / 3
rev.113018
DIP 1
OFF
Not Used
DIP 2
OFF
Not Used
DIP 3
OFF
Not Used
DIP 4
ON
AV Input Enable
OFF
AV Input Disable
DIP 5
OFF
CAN Termination Radio Side
DIP 6
OFF
CAN Termination Car Side

SWITCHING TO THE A/V INPUT
Press the BACK button once to switch to the AV source.
On some vehicles, there is a SWC control switch behind
the left side if the steering wheel. Press the middle button
to switch to the A/V source.
NOTE: If there is no video signal flowing through the
AV input, there will be a BLUE screen present. To exit,
simply press the BACK or SWC button again.
8.4” Uconnect Radio (1-Piece Radio)
5” Uconnect Radio (1-Piece Radio)
3 / 3
rev.113018