Crystal Eyes LED3-3040C-A User manual

READ ME FIRST! Installation Instructions
LED3-3040C-A, CS-A L.E.D. MEGA 3RD BRAKE LIGHT
LED3-3040XC-A, XS-A 2007-UP SILVERADO / SIERRA
1. 2. 3.
Unscrew the stock brake light. Keep
screws for Step 10.
Unplug stock connector from the light. Remove stock light.
4. 5. 6.
From IPCW's MEGA 3rd Brake Light,
unscrew 2 screws from each side of the
LED light bar. Keep screws for
Step 14.
Unscrew 2 more screws from the
bottom of LED light bar. Keep
screws for Step 15.
Separate LED light bar from chrome
base. Plug in stock connector and
test to make sure all functions
work properly before installing
it. Then unplug it.
7. 8. 9.
Wipe clean vehicle's 3rd brake light
area with slightly damp cloth.
Do not peel off paper backing
from bottom of chrome base.
We do not recommend taping
the light to vehicle as the
adhesive might damage body
paint when you try to remove it.
Put the chrome base on vehicle by
aiming its screw holes to vehicle's stock
light screw holes making sure they line
up.
10. 11. 12.
Screw on the chrome base using
original screws kept in Step 1.
Insert the clips on top of LED light bar
to chrome base.
Plug in the stock connector from vehicle
to MEGA Light connector.

Close down LED light bar and click its
bottom into chrome base. Make sure it
is secured.
Screw on light bar to chrome base
using screws kept from Step 4.
Screw on bottom of LED light bar to
chrome base using screws kept from
Step 5.
16. 17.
Done! Thank you for your purchase.
We hope you enjoy your new Crystal
Eyes L.E.D. MEGA 3rd Brake Light.
13. 14. 15.
IPCW LIGHTS LED TAIL LIGHTS