CTA PAD-PARAPOSW User manual

PAD-PARAPOSW
INSTALLATION - MANUAL
POS Station w/ Printer Stand, Magnetic Scanner
Card Reader Holder & Universal Security Enclosure (White)
INSTALLATION:
1.Installing the Enclosure :
2. Placing Magnetic Card Reader 3. Placing Magnetic Scanner Holder
1A. Align enclosure (A) with Kiosk Body (B) 1B. After enclosure vesa holes are aligned to VESA plate,
rotate in screws (G) with provided tool (M) while holding
hex nuts (F) from behind until securely fastened.
CONTENTS:
2A. Place magnetic card reader holder (E)
anywhere magnetic to setup. 3B. Place magnetic scanner holder (D) on arm as
shown above.
x1
B
x1
Arm
Extender
C
x1
Scanner
Holder
D
x1
Card Reader
Holder
E
x1
A
x1
Key
Set
Lx1
M5
Allen
Key
M
x2
H
x2
I
x1
K
x1
J
x4
M5
Nut
F
x4
M5
X6
G
A
B
A
BB
G
F
E
D
**Tablet for illustration only and not included
M
N
Foam / Sheet
Bundle Kit
J
3A.Screw in arm extender (C) as illustrated using
screws (J) and provided tool (M).
C

5. (Optional) Placing Hole Fillers View Angles and Orientation
5A. If not anchoring into surface, use the (2) hole
fillers (K) to plug in for a more seamless look.
Horizontal or
Vertical View Tilt Adjustability
**Tablet and Powerdrill for illustration only and not included
H
I
B
B
K
4. (Optional) Anchoring Base to Surface
4A. Drill (2) holes into the surface using a power drill or like (not provided). Insert the plastic anchors (H)
into the holes and then align the kiosk (A) holes with surface. Then take the screws (I) and rotate in with
screwdriver (not included) until securely tightened.
**Tablet for illustration only and not included
Anti-Theft Enclosure Security Setting up Tablet Enclosure
Tilt the enclosure as seen above for ideal viewing
angle. Rotate 90 degrees for preferred portrait or
landscape views.
Place the key (L) in the enclosure to open up the
enclosure. Rotate and remove to lock the
enclosure. Identify the foam / sheet bundle (N) in package. Select the
corresponding pieces that will fit your device within the
enclosure. Try them out until you find the correct fit.