Vivo STAND-TV55A User manual

Indoor Digital Signage TV Stand
Scan the QR code with your mobile device or follow the link
for helpful videos and specications related to this product.
Instruction Manual
https://vivo-us.com/products/stand-tv55a
[email protected]om www.vivo-us.com 1-800-371-5654
SKU: STAND-TV55A

2 3
PACKAGE CONTENTS
WARNING!
A (x2)
Leg
B(x3)
Crossbar
C(x1)
Upper
Crossbar
I (x4)
Cable Clip
J (x1)
Allen Wrench
K(x1)
Wrench
H(x10)
M8x30
D (x2)
VESA Bracket
E (x2)
Pole
F (x2)
M6x30
G (x2)
M6x14
If you do not understand these directions, or if you have any doubts about the safety of the
installation, please call a qualied technician. Check carefully to make sure there are no missing or
defective parts. Improper installation may cause damage or serious injury. Do not use this product
for any purpose that is not explicitly specied in this manual. Do not exceed weight capacity.
We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or
inappropriate use.
NOTE: NOT ALL HARDWARE INCLUDED WILL BE USED
ASSEMBLY STEPS
STEP 1
TOOLS NEEDED DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
Phillips
Screwdriver
M-F (x4)
Metal Washer
M-G (x8)
Small Spacer
M-E (x4)
M8x50
M-A (x4)
M5x14
M-B (x4)
M6x14
M-D (x4)
M8x30
M-H (x8)
Big Spacer
M-C (x4)
M6x30
STEP 2
TIPOVER WARNING
SERIOUS OR FATAL CRUSHING INJURIES CAN OCCUR FROM TIPOVER. TO HELP PREVENT TIPOVER:
• NEVER ALLOW CHILDREN TO CLIMB, STAND, HANG, OR PLAY ON ANY PART OF TV OR TV STAND.
• USE TIPOVER RESTRAINT OR ANCHOR STAND TO WALL
USE OF TIPOVER RESTRAINTS MAY ONLY REDUCE, BUT NOT ELIMINATE RISK OF TIPOVER.
77lbs
(34.93kg)
Unfold legs (A). Assemble x2 crossbars (B) to legs using M8x30
bolts (H), making sure pins on each end t into pin holes in
legs. Tighten with the Allen wrench (J).
Align support brackets on rear of legs with front holes, and secure using
M6x14 bolts (G).

4 5
STEP 3
Slide poles (E) onto legs, making sure the pin holes are facing inward on both. Secure with M8x30
bolts (H) and tighten with the Allen wrench.
STEP 4
Assemble upper crossbar (C) to upper holes on poles using M8x30 bolts (H), making sure pins on each
end are t into pin holes. Repeat for crossbar (B) below, and tighten with the Allen wrench.
STEP 5
Adjust feet using the wrench (K).

6 7
STEP 6 STEP 7
OPTION A: Flat Back Monitor
Position the VESA brackets (D) on the back of the TV, making sure the hooks are towards
the top of the TV. Secure using screws (M-A or M-B) with square washers (M-F).
STEP 8
OPTION B: Curved Back Monitor
Position the VESA brackets (D) on the back of the TV, making sure the hooks are towards
the top of the TV. Secure using screws (M-C, M-D or M-E) with square washers (M-F) and
spacers (M-G, M-H).
Hang the TV with VESA brackets over the top crossbar, and secure using M6x30 bolts (F).
Attach cable management clips (I) to back of legs and manage cables.

Last Updated: 10/22/2018
If any parts are received damaged or defective, please contact us. We are happy to
replace parts to ensure you have a fully functioning product.
For more VIVO products, check out our website at:
www.vivo-us.com.
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
[email protected]om www.vivo-us.com 1-800-371-5654