Cubitt CT2 3 Series User manual

English
User Manual
Cubi Smartwatch
CT2
Series 3

Introduction
Open the package and check the
product
Package contents:
•CT2s Series 3 smartwatch (with built-in
lithium baery)
• User guide and charging cable
Connect the contact points of the
magnetic charging cable to the contact
points of the watch to charge and
activate the device, and to turn it on.
Scan the following QR code to download
our app or download it with the follow-
ing link: hp://app.cubi.co/watch
1.
2.
3.
4.

In the app interface, set your personal
information, as well as your step and
weight goals
Open the app, tap the “More” icon in the
upper right corner, select "Add Device",
select the device category, and select
the device you wish to link in the
corresponding search list. You may also
link the device directly by scanning the
device’s QR code using the scan
function.
5.
6.

Salud
A. Watch
Health
The watch will automatically record your
data.
You can manually measure your heart
rate, SpO2, and stress on the bracelet,
moreover, it can monitor your heart rate
and sleep throughout the day. You can
manually operate it or set it to automati-
cally monitor your health all the time.
To start an exercise:
Start the sports App on the bracelet,
click an ICON of sports type and set the
goal, then start to exercise.
1.
2.
3.
B. App
Open the app, enable the Bluetooth
feature.
Light up the bracelet screen and bring it
close to your phone.
1.
2.

Click "Bind Device" on the App, and
select the bracelet model in the search
results to bind;
Conrm the binding request on the
bracelet;
Fill in your information and set your step
goal on the App to complete the binding.
3.
4.
5.
Basic Operations
Wear it correctly:
make sure that the
boom sensor is
properly aached to
the skin, and the
strap shall be one
1.
nger away from the wrist.
Touch operation: the CT2s Series 3
supports full-screen touch operations.
Single click: select; long press: enter or
conrm.
2.

3.Touch key: the CT2s Series 3 has a
touch key. Short press: return or close a
notication.
Function Description
1. Dials
You can switch between dierent dials in
the “Dial Seings”. And you can download
and install more dials in the “Dial Market”.
2. Sports
14 Sports modes are provided: outdoor
run\indoor run\outdoor walk\indoor
walk\hiking\outdoor cycle\indoor
cycle\cricket\pool swim\ open water
swim\yoga\rower\elliptical\workout.
You can choose to show or hide any sports
mode in the app.

3. Functions
Swipe up or down to select an icon. The
icons include: Message, Health Data,
Workout, Heart Rate, Stress, SpO2, Sleep,
Relax, Music, Time, and Seings.
CT2s Series 3 has the Intelligent Sports
Detection function, and can detect if the
user is running or walking; this function
can be enabled or disabled in the App.
The Sports Summary of CT2s Series 3
contains a variety of sports data, and the
details can be viewed in the App.

3.1 Health Data
It supports viewing the daily accomplish-
ment of the following info: steps, calories,
distance and activity.
3.2 Heart Rate

It supports measuring your heart rate
any time or viewing the daily monitoring
data. Also, you can set the measurement
frequency in the App seings.
After you start the heart rate measure-
ment App, you should keep your arms
and wrists still during the measurement.
1.
2.
3.3 Stress
After you start the stress measurement
App, you should keep your arms and wrists
still during the measurement.
3.4 SpO2
After you start the SpO2 measurement
App, you should keep your arms and wrists

still during the measurement.
3.5 Sleep
You can view the most recent sleep record
and sleep status at each stage.
3.6 Relax

Enter the Relax App and choose the
duration;
Click to start, then follow the vibration
frequency and animation instructions to
adjust your breathing and it will help you
relax.
1.
2.
3.7 Stopwatch
Stopwatch and a timer are provided.
3.8 Alarm

The watch can be set to add, delete,
turn on/o the alarm; you can also set
the alarm to the watch through the APP;
you can also set the label you need in
the alarm to identify the alarm
You can set the alarm delay time and
times in the APP to decide how long you
want to delay and how many times to
delay
1.
2.
3.9 Timer
You can set a timer with a preset duration
on the watch, and the timer will remind you
when the timer expires; you can customize
the timer time

3.10 Weather
Supports current city three-day weather
viewing, you can view today’s "current
weather, highest and lowest weather
values" and the "highest and lowest
weather values" for the next two days.
3.11 Music
When the watch is connected to the
APP, you can control the mobile music
player to perform the functions of
"next, previous", "play\pause" and
1.

"volume increase and decrease".
This function can be displayed\hide in
the APP seings.
2.
3.12 Exercise Record
You can view your recent exercise records
on the watch, including detailed data
about your exercise; you can also view the
exercise records on the APP.
3.13 Find my phone

When the watch is connected to the
APP, you can make your phone ring
Click the icon to end the ringing
This function can be displayed\hide in
the APP seings
1.
2.
3.
3.14 Seings
You can set your wrist-lifting screen,
real-time heart rate, and do not disturb
switch on the watch This function can
be displayed\hide in the APP seings
You can switch the locally stored watch
face on the watch
You can set the brightness of the watch
and the length of time the screen is on
on the watch; you can set the switch to
reduce the brightness at night
1.
2.
3.

You can control the shutdown, restart,
and factory seings of the watch on
the watch (after restoring the factory
seings, all data in the watch will be
cleared and the binding relationship with
the phone will be released)
4.
4. Reminders
The watch supports multiple reminder
modes, including message reminder,
incoming call reminder, walking reminder,
drinking reminder, exercise goal reminder,
exercise center rate warning reminder, etc.

Customer Service
For any customer service assistance
or warranty issues, please scan the
following QR code
We are here to help!

cubiocial.com

Español
Manual del usuario
Reloj deportivo inteligente
CT2
Serie 3

Introducción
Abra el paquete y revise su contenido.
Contenido de entrega:
• Reloj inteligente CT2 Serie 3 (con batería
de litio integrada).
• Manual del usuario.
• Cable para carga.
Conecte el cable para carga magnético
al conector de carga en el reloj. Se inicia
la carga y el reloj se enciende.
Digitalizar el siguiente código QR para
descargar nuestra aplicación o puede
descargar la aplicación con el siguiente
link: hp://app.cubi.co/watch
1.
2.
3.
4.