Cyber Acoustics Essential WC-3000 User manual

Quick Start Guide
www.CyberAcoustics.com CA P/N: WC-3000 Rev. A00
2021-12
Webcam 1080P 5MP
Your Essential Webcam

In the Package
Quick-Start Guide
Webcam 1080P 5MP
CA Essential Webcam 1080P 5MP
Quick Start Guide
www.CyberAcoustics.com
Webcam 1080P 5MP
CA P/N: WC-3000 Rev. A00
2021-12
Your Essential Webcam

Table of Contents
Features of the CAEssential Webcam 1080P 5MP
Connecting the CA EssentialWebcam 1080P 5MP with Your
Computer
Attaching the CA Essential Webcam 1080P 5MP to Your Monitor
Using the CA Essential Webcam 1080P 5MP with your Windows
and Mac Computer
Using Camera Application on Your Windows 10 Computer
Using Applications on Your Mac Computer
CA Essential Webcam 1080P 5MP Specications
Webcam Flickering Fixing
Pages
1
2
3
4
5
6
7
8, 9
Contacting Customer Support
Safety and Precautions
10
11
Compliance Information 12

Features of the CA Essential Webcam 1080P 5MP
Rotate For Privacy
Page 1
Dual Omnidireconal
Microphones
Auto Focus
HD Lens

Page 2
Connecting the CA Essential Webcam 1080P5MPwith
Your Computer
The CA Essential Webcam 1080P 5MP features full plug and play support for Windows,
OSX / MacOS and Chromebooks. After plugging the webcam into the computer’s USB
Type A port, you may start any application that accepts a USB video stream, such as Skype,
and beging using your webcam.
Note:
To use the webcam’s internal microphone, you will have to select it as a USB audio input in
your application settings.
If the computer does not automatically recognize the webcam when it is plugged in to the
USB Type A port, try plugging the USB Webcam Cable into a dierent USB Type A port. If
this does not work, then restart the computer. This will cause the webcam to be recognized
in most instances.
Insert the end of the USB Webcam Cable into
the USB Type A port on your computer as
show below.

Attaching the CA Essential Webcam1080P 5MP to Your
Monitor
1 - Mount on Top
of Your Monitor 2 - Slide Front of
Webcam up
Against the Front
of Monitor
3 - Push Adjustable
Base Against
the Rear of Monitor
Page 3

Page 4
Using the CA Essential Webcam1080P 5MP with Your
Windows and Mac Computer
To use the webcam with your Windows computer you will need to allow applications
installed on your computer to access the webcam in the Windows security settings.
- Select the Startbutton
- Select‘Settings’
- Select ‘Privacy’ (Scroll down to bottom of page)
- Select ‘Camera’
- Turn on the ‘Allow access to the camera on this device’
To use the webcam with your Mac computer you may need to allow applications installed on
your computer to access the webcam in the Mac OS security settings.
- Select the Apple menu in the top left corner of the screen and choose‘System
Preferences’
- Select ‘Security & Privacy’ preference panel
- Select ‘Privacy’
- Select ‘Camera’ from the list on the left side
- Locate the application(s) you want to allow access to the webcam and check the
box alongside the application name to enable the application to access the webcam

Page 5
Using Camera Application on Your Windows 10 Computer
Camera application - Allows you to preview the webcam image, capture still frames and
video clips.
- Select the Start button
- Select ‘Camera’ from the list of applications
Afteryou open the Camera app:
- Select Photo or Video , then select it again to take a picture or start a video. If you
are making a video, select Video again to finish recording.
- To see your new photo or video, or ones you've taken before
- Select the Start button
- Select ‘Photos’ from the list of applications
Note:
If you are using a laptop with an integrated camera or have a second camera installed, you
will need to change the camera selected in the app so that the CA Essential Webcam
1080P 5MP is selected.
- To select between cameras select the camera icon with the circular arrow in the top right
corner of the application. Selecting the icon will switch between installed cameras.
- If onlyone camera is installed on your Windows computer, the camera icon with the
circular arrow will not be displayed.

Page 6
Using Applications on Your Mac Computer
Photo Booth Application - Allows you to preview the webcam image, capture still frames
and video clips.
Note: You will need to enable the webcam in the Mac OS security settings, refer to
instrucitons on page 2.
- Select the Finder button, select ‘Applications’ and then select ‘Photo Booth’
- At the top of the screen, select “Camera’ in the Photo Booth application menu and select
‘CA Essential Webcam 1080P 5MP’ from the list of options.
- To capture images from the webcam, select the red camera icon.
- To switch to video mode, select the film strip button in the bottom left corner of the
application. The red camera icon will change to a video icon .
QuickTime Player - Allows you to easily create video recordings that use the full webcam
resolution.
Note: You will need to enable the webcam in the Mac OS security settings, refer to
instrucitons on page 2.
- Select the Finder button, select ‘Applications’ and then select ‘QuickTime Player’
- Select ‘File’ and then select ‘New Movie Recording’.
- To select the webcam input, select the small downward facing arrow next to the round
record button .
- Select the record button to capture video.

Features:
- High Resolution HD Digital Camera CMOS Sensor
- Maximum video size: 2592 x 1944 (5M pixels)
- USB 2.0 High-Speed
- Transmission: 2592 x 1944 upto 30 frames per second under MJPG mode.
- AWB (Automatic White Balance)
- Auto Focus
- View Angle: 65 degrees in horizontal plane
- High precision glass lens
- Built-in microphones
Basic System Requirements:
- 1GHz Intel®Core™2 Duo or above
- 512 MB RAM or more
- 200 MB available hard drive space
- Internet connection
- USB Type A 2.0 port
- OS X 10.7 or above
- Windows XP / 7 / 8 / 10
Requirements for 1080P 5MP Video Recording:
- 3GHz Intel®Core™2 Duo
- 2 GB RAM
- 2592 x 1944 HD screen resolution
CA Essential Webcam 1080P 5MP Specifications
Page 7

Fixing Video Flickering
Video ickering can be xed by following the recommended settings:
- The Flicker Control setting is preset at 60Hz.
- When traveling to another country where the powerline frequency is 50Hz, you may nd that
the video is ickering. This will require switching the Flicker Control to 50Hz.
- When returning back to your home country, switch the Flicker Control back to 60Hz.
There are two ways to stop your video from ickering:
- Utilize a 3rd Party application called AMCap
(see instructions below)
- Change through the settings of your Video Messaging
application (see instructions on page 9)
AMCap:
- Download & install AMCap Demo version from
https://amcap.en.softonic.com/download?ex=NB-6.2
- Launch AMCap
- Select Options --> Video Device -->Properties
- Select appropriate Flicker Control to 50Hz or 60Hz in
Light Source row.
Page 8

Fixing Video Flickering
Skype Application:
When using Skype with the CA Essential Webcam1080P 5MP.
- Launch and sign in to Skype.
- Go to Tools > Options > Audio & Video Settings.
- Click the Webcam settings button.
- Change the PowerLine Frequency (Anti Flicker)
based on the recommended settings as
mentioned on Page 8.
- Click Apply and then click OK.
For other applications using Video, please refer to your software user guide on how to adjust
the Flicker Control.
Page 9

Page 10
Customer Support
Contact us at:
www.cyberacoustics.com/support/contact
If you have a question about your CA Essential Webcam 1080P 5MP our
Customer Support Team wants to assist you.

Safety and Precautions
- Read and follow all instructions – All operating and use instructions should be followed.
- Protect the USB Type A Cable from being pinched, particularly at the connectors. Unplug
during lightning storms or when unused for long periods of time.
- If the webcam becomes hot after running for a long time, stop using the webcam for a
period of time to let the webcam cool down.
- Do not place near any heat sources that produce heat.
- Do not make alterations to the webcam.
- Do not place near naked flame sources, such as lighted candles
- Do not expose to excessive heat (e.g. from storage in direct sunlight, fire or the like).
- Avoid touching the lens with fingers, sharp or coarse materials; use a clean, soft cloth for
cleaning.
- Avoid dropping the webcam; impacts may cause damage to the lens, internal malfunction
or scratches to the camera surfaces.
2021 Cyber Acoustics or its subsidiaries. All rights reserved. Cyber Acoustics and other
trademarks are trademarks of Cyber Acoustics or its subsidiaries. Other trademarks may be
trademarks of their respective owners.
Page 11

Responsible Party - Cyber Acoustics LLC
3109 NE 109th Ave., Vancouver, WA 98682
cyberacoustics.com
FCC Part 15
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired
operation.
This equipment has beentested and found to comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can
interference by one or more of the following measures:
•Reorient or relocate the receiving antenna
•Increase the separation between the equipment and receiving device
•Connect the equipment into an outlet on erent circuit from the receiving device
•Consult the dealer or an experienced radio/TV technician forhelp
esponsible for compliance could void
the user’s authority to operate the equipment.
Page 12
Unique Identier: (WC-3000)