Cyberoam Netgenie NG11E User manual

QUICK START GUIDE
NG11E Appliance
NG11E
Document Version: PL NG11E-12/13/2010
Parental
Controls
Hack Safe Anti-Virus Any-Device
Connectivity
Plug n Surf
http://netgenie.cyberoam.com
NetGenie is furnished under the terms of Elitecore's End User license agreement, which is available in this
Quick Start Guide from page 8. By using this Appliance, it shall be presumed that you have read the said
license and you agree to be bound by the terms and conditions of the same.
Powered by

Secure Wireless Router for
Safe Internet Surfing for Your Family
USA Toll Free 877-777-0368
India Toll Free 1-800-301-00013
Reach us at: netgenie.cyberoam.com
[email protected]
[email protected]
Unpack Your New NetGenie…
What you will also need…
Key Parameters
NetGenie : The Appliance
Step1 :
Step2 :
Step3 :
Step4 :
1.
2.
!
!
!
2
2
2
2
2
2
3
4
6
7
8
Getting your NetGenie Ready
Enabling Parental Protection and Control
Identify, Set up and Connect to the Internet 3
Secure Internet Connectivity through ADSL/Cable Modem 4
Secure Internet Connectivity through Direct Cable
Secure Internet Connectivity over WiFi 5
6
Scenarios - ‘How to connect NetGenie’
NetGenie's Family Protection
-
-
-
Front panel
Back panel
Logging on to NetGenie
Adding your family members
Beginning Surfing
Deleting Users
Scenario 1
Scenario 2
Scenario 3
Quick Reference
NG11E
2
1
3
Page
no.
Section
no.
Know your NetGenie
Connecting to the Internet

Unpack Your New NetGenie …
Congratulations on your purchase of NetGenie Secure
Home Appliance. When you open the box, you will find
the following components:
1. NetGenie Wireless Base Unit - NG11E
2. Two (2) Detachable WiFi Antennas
3. One RJ-45 Ethernet Cable
4. One Power Adapter
5. Quick Start Guide
Please contact the vendor from whom you purchased
this appliance if anything is missing.
1
2
Section
1
3
2
4
5
What you will also need…
Key Parameters
Netgenie : The Appliance
1. Internet connectivity through a DSL/Cable modem/Direct Internet Cable with RJ45 (Ethernet)
connection.
2. At least one computer with an installed network interface adapter/wireless network adapter.
3. Any Internet Browser to surf the Internet.
Default IP address to access NetGenie: http://10.1.1.1
Default User Name: admin
Default Password: admin
WAN / Internet
Connectivity LED
LAN / Your
Computer
Connectivity LED
Power LED
Wireless (WiFi)
Connectivity LED
Front Side
WiFi
Antennas
Power
Adapter Jack
Connect your PC/
Machine / LAN Here
Reset
Switch
WiFi On / Off
Switch Connect Your
Internet / WAN Here
Back Side

Getting your NetGenie Ready
Identify, Set up and Connect to the Internet
Before you start accessing the Internet through NetGenie, you must assemble the appliance first.
1. Screw in the detachable Wi-Fi antennas in their respective jacks provided in the back panel.
2. Look out for the sticker at the bottom of the appliance containing the default wireless network name,
technically known as SSID and the pass key. These pre-secure your wireless network from any unauthorized
access. Please retain your pass key for future use.
3. Plug the power supply into the socket on the back of the NetGenie Base Unit.
4. Plug the power supply into the nearest mains socket.
5. Before you access the Internet through NetGenie, make sure the socket has been switched on. This will turn
green the Power LED on the front panel.
Depending on your home network set-up, you can connect NetGenie to the Internet according to the following
scenarios:
3
2
Section
Phone Line → ADSL Cable Modem
→ PC / Laptop, refer
/
Scenario 1
Phone Line → ADSL Cable Modem which is also your
WiFi access point → PC / Laptop, refer
/
Scenario 3
Phone Line → ADSL Cable Modem → WiFi access point
→ PC / Laptop, refer
/
Scenario 3
Direct Cable → PC / Laptop,
refer Scenario 2
Note : If you are dialing out of your machine/ laptop (PPPoE) to connect to the Internet, please refer the
support section at http://netgenie.cyberoam.com.
Internet
Desktop Computer
Internet
Internet
Internet
ADSL/Cable Modem
+ Wireless Router
ADSL/Cable Modem
ADSL/Cable Modem
Laptop
Laptop
Desktop Computer
Desktop Computer
Wifi Router
Desktop Computer
Modem
Power
Cable
Modem
Power
Cable
Power
Cable
Modem
Power
Cable

4
Scenarios - ‘How to connect NetGenie’
Please check how you have connected to the Internet and note it down before you make any changes. We have
given three (3) different scenarios. Two (2) of them are for wired connection, one (1) is for wireless connection.
Please check the relevant scenario and follow the instructions.
Modem
Power
Cable
ADSL/Cable Modem
NetGenie
Secure Home Appliance
Connect your Computer/
Machine/LAN here to
any of the ports
Connect your Internet
cable / WAN here
Laptop Or
Desktop Computer
NetGenie
Power Cable
NetGenie
Power Cable
Connect your internet
cable / WAN here
Connect Your Computer/
Machine/LAN here in
any of the ports
NetGenie
Secure Home Appliance
Laptop Or
Desktop Computer
Internet
Scenario 2
2
Section
1. Unplug the Internet cable that connects to your computer and plug it into the NetGenie socket labelled “WAN”.
Secure Internet Connectivity through Direct Cable
Internet
Scenario 1
Secure Internet Connectivity through ADSL/Cable Modem
1. Unplug the cable that connects the ADSL Router/Cable Modem to your computer and plug it into the
NetGenie socket labelled “WAN”.
2. Use the RJ-45 Ethernet cable provided with the NetGenie appliance to connect your computer to any of
the NetGenie sockets labelled “LAN”.
3. Switch on/Power up your ADSL Modem/Cable Modem and wait till it connects to the Internet. The
Internet LED on theADSL modem will turn green and remain steady.
4. Switch on/Power up the NetGenie appliance. Wait till the Power and WAN LEDs turn green.
5. Switch on your computer now. NetGenie's LED labelled “LAN” will turn green and remain steady.
6. Open your browser and surf the Internet. Your computer is now secured from Internet based threats and
malware as the Quick Security feature will be turned on automatically.
If you wish to configure secure Internet access that is age-sensitive, refer the Family Protection section.
If you are not able to connect to the Internet after following the above mentioned steps, please revert back
to your original setup and refer to the support section at http://netgenie.cyberoam.com.
Note:
!
!

5
1. Unplug the Internet cable that connects to your computer and plug it into the NetGenie socket labelled
“WAN”.
2. Use the RJ-45 Ethernet cable provided with the NetGenie appliance to connect your computer to any of
the NetGenie sockets labelled “LAN.”
3. Switch on/Power up your NetGenie appliance. Wait till the Power and WAN LEDs turn green.
4. Switch on your computer now. NetGenie's LED labelled “LAN” will turn green and remain steady.
5. Open your browser and surf the Internet. Your computer is now secured from Internet based threats and
malware as the Quick Security feature will be turned on automatically.
If you wish to configure secure Internet access that is age-sensitive, refer the Family Protection section.
If you are not able to connect to the Internet after following the above mentioned steps, please revert back
to your original setup and refer to the support section at http://netgenie.cyberoam.com.
Note:
!
!
1. Use the cable that has come with your NetGenie appliance to connect it to the ADSL Router/ Cable
Modem. Insert one end of the cable in the NetGenie socket labeled “WAN” and insert the other end in
your modem “LAN”.
In case of Direct Cable Internet, please connect it directly to the NetGenie “WAN” socket.
2. Switch on/Power up your NetGenie appliance. Wait till the Power and WAN LEDs turn green. Wait till
the WLAN/WPS LED turns green and stabilizes.
3. Boot up your laptop. Make sure that your Wireless Network Adapter is enabled. Your laptop will
automatically detect the wireless network (also called SSID) named “NetGenie”. If you already
configured wireless networks before, click the network icon in your machine's system tray (bottom-left
of your screen). You will be able to see a list of available wireless networks. Select “NetGenie.”
4. Once you select “NetGenie”, you will be asked to enter the Security/Pass Key. Enter the security/pass
key printed on the sticker at the bottom of your appliance. Make sure you enter it exactly as printed.
It is advisable to turn off your router's Wi-Fi, to avoid any security breaches.
5. Open your browser and surf the Internet. Your computer is now secured from Internet based threats
and malware as the Quick Security feature will be turned on automatically.
If you wish to configure secure Internet access that is age-sensitive, refer the Family Protection section.
If you are not able to connect to the Internet after following the above mentioned steps, please revert
back to your original setup and refer to the support section at http://netgenie.cyberoam.com.
Note:
!
!
2
Section
Internet
NetGenie
Secure Home Appliance
ADSL/Cable
Modem
Modem
Power
Cable
Direct Cable
Connect your Internet
cable / WAN here
NetGenie
Power Cable
Laptop Or
Desktop Computer
Wireless
Desktop Card
Scenario 3
5
Secure Internet Connectivity over WiFi

6
3
Section
NetGenie's Family Protection
Enabling Parental Protection and Control
Once you have begun surfing the web securely, you would want to enhance protection for your spouse, kids and
other members of the family using NetGenie's Parental Protection and Control. Since, your family may have
different members comprising diverse age groups, you would wish to give them age-appropriate Internet
access.
In order to reflect your family in NetGenie, you will have to create users and assign appropriate age access for
each one of them. The user here refers to the name of your family member for whom you want to set access
policies in surfing the Internet.
Step1: Logging on to NetGenie
1. Enter: http://10.1.1.1 in your browser's address bar the place where you type in the URL of various
websites such as www.google.com.
2. You will come across the following Admin Screen. Enter “admin” as user name and “admin” as password
and click the Login button.
Step2: Adding your family members
1. You will come across the Family Protection Page. Enter the name of the person for whom you wish to allow
Internet access in the Username section. Here, for example, the username used is: “Rima”.
1
3
2
2
7
5
4
4
6

7
3
Section
Step3: Beginning Surfing
1. Open a new browser window and type in: www.google.com, in the address bar. You will come across a
user identification page. Click the image and you will be presented with a password entry section.
2. Choose a password and enter it in the next two sections.
3. Drag the slider bar to reflect the appropriate age for any of your family members. This selection will ensure
any websites that could be considered inappropriate for children of a particular age group, will be blocked.
4. If you wish, you can change the picture of the family member, by clicking on the image icon. Similarly, if you
wish to keep a log of Internet activity for all your family members, please check the “Enable Web Activity
Reporting” checkbox.
5. In case of any confusion in the configuration, please refer to instructions given in the “help” panel on the
right side of the screen.
6. Click theApply button to save the changes.
7. Click the Logout link to close the browser.
Please note: Children below 8 years might not be able to remember or type the password. Hence, we
recommend that, you do not specify a password for them. In that case, you can simply leave the password
fields empty.
Click the link given in the bottom-right to start surfing. The site will open in a new tab / window. After surfing, do
not forget click the Logout button for security reasons.
Similarly, you can add the name and the appropriate age for all your family members.
NetGenie, will provide you all, with safe Internet.
Enter the password if you had specified it during the creation of the user and click Login.
2. You will be presented with the following page.

Trademarks:
Copyright Statement:
Product License Agreement:
1. License Grant.
Elitecore and NetGenie are trademarks of Elitecore
Technologies Private Limited. All other trademarks, if any, belong to
their respective owners.
Copyright © 1999-2010 Elitecore
Technologies private Limited. All Rights reserved. The contents
herein are subject to change by Elitecore without prior notice. No
part of this publication may be reproduced in any form or by any
means or used to make any derivative such as translation,
transformation, or adaptation without permission from Elitecore, as
stipulated under The CopyrightAct, 1957 of the Republic of India.
CAREFULLY READ THE
FOLLOWING LEGAL AGREEMENT. USE OF ELITECORE
TECHNOLOGIES PRIVATE LIMITED. (“ELITECORE”)
PRODUCT(S) AND ANY UPDATES THERETO (THE
"PRODUCTS"), INCLUDING THE SOFTWARE CONTAINED IN
THE PRODUCTS (THE "SOFTWARE") CONSTITUTES
ACCEPTANCE BY YOU ("CUSTOMER") OF THESE
PROVISIONS. ELITECORE SHALL NOT BE BOUND BY ANY
ADDITIONAL AND/OR CONFLICTING PROVISIONS IN ANY
ORDER, RELEASE, ACCEPTANCE OR OTHER WRITTEN
CORRESPONDENCE FROM CUSTOMER UNLESS
EXPRESSLY AGREED TO IN A WRITING SIGNED BY AN
AUTHORIZED REPRESENTATIVE OF ELITECORE. IF
CUSTOMER DOES NOT AGREE TO THE PROVISIONS OF THIS
AGREEMENT, CUSTOMER SHALL PROMPTLY RETURN THE
PRODUCTS TO THE LOCATION WHERE CUSTOMER
OBTAINED THEM FOR A FULL REFUND. IF YOU DO NOT
AGREE TO All OF THE TERMS OF THIS AGREEMENT, DO NOT
START THE INSTALLATIONPROCESS.
This is a license, not a sales agreement, between
You, the end user and Elitecore. The term "Firmware" includes all
Elitecore and third party Firmware and software provided to You as
NetGenie, an Elitecore Product, with the exception of any open
source software contained in Elitecore's Products, which is set forth
in detail in section 12 below, and includes any accompanying
documentation, any updates and enhancements of the Firmware
and software provided to You by Elitecore, at its option. Subject to
proper payment to Elitecore, Elitecore grants to You a
nontransferable (except as provided in section 5 ("Transfer") and
section 12 ("Open Source Software") below), nonexclusive license
to use the Firmware and Software for your internal business
purposes, in accordance with the terms set forth in this License
Agreement. You agree not to assign or sublicense such license
provided to You under the terms of the License Agreement, except
as may be specifically permitted vide the terms of the License
Agreement. The Firmware and software are "in use" on the Product
when they are loaded into temporary memory (i.e. RAM).
Note: For evaluation Software and/or Products for which Elitecore
does not charge a fee, the payment requirement does not apply.
You may not attempt and, if You are a
corporation, You will prevent your employees and contractors from
attempting to, (a) modify, translate, reverse engineer, decompile,
disassemble, create derivative works based on, license, or
distribute the Firmware or the accompanying documentation; (b)
rent or lease any rights in the Firmware or software or
accompanying documentation in any form to any person; (c) except
as provided in section 5, transfer assign or sublicense right to any
other person or entity, or (d) remove any proprietary notice, labels,
or marks on the Firmware, software, documentation, and
containers.
All rights, title, interest, and all copyrights to
the Firmware, software, documentation, and any copy made by You
remain with Elitecore. You acknowledge that no title to the
intellectual property in the Firmware and software is transferred to
You and You will not acquire any rights to the Firmware except for
the license as expressly set forth herein.
Except for evaluation licenses, where
the term is limited per the evaluation agreement, the term of the
license is for the duration of Elitecore's copyright in the Firmware
and software. Elitecore may terminate this Agreement immediately
without notice if You breach or fail to comply with any of the terms
and conditions of this Agreement. You agree that, upon such
termination, You will at Elitecore option either destroy all copies of
the Elitecore documentation or return all materials to Elitecore. The
provisions of this Agreement, other than the license granted in
Section 1 ("License Grant"), shall survive termination.
If you are a reseller or distributor of Elitecore Products,
you may sub-license (not rent or lease) the Firmware or software to
the end user on a permanent basis, provided that: (i) the end user
receives a copy of this Agreement and is bound by its terms and
conditions, (ii) you at all times comply with all applicable laws and
regulations of the Republic of India , and (iii) you agree to refund any
fees paid to you by an end user who purchased Product(s) from you
but does not agree to the terms contained in this EULA and
therefore wishes to return the Product (s) as provided for in this
EULA.
2. Limitation on Use.
3. Proprietary Rights.
4. Term and Termination.
5. Transfer.
8
3
Section
Step4: Deleting Users
1. If you wish to delete a user, please click the icon next to the username in the left hand panel of the Family
Protection page.
2. Confirm your action by clicking the OK button.
3. The user will be deleted.
End User License Agreement

6. Limited Warranty.
7. Disclaimer of Other Warranties and Restrictions.
8. Governing Law.
9. Limitation of Liability.
Elitecore provides this limited warranty for its
product only to the person or entity that originally purchased the
Product from: Elitecore or its authorized reseller or distributor. The
warranty starts on the date of purchase and shall be valid for a
period of 6 (six) months thereafter. All warranty claims must be
submitted before the expiration of the warranty term, i.e. 6 (six)
months from date of purchase of the Product. Elitecore's sole
obligation shall be to repair or replace the defective Product or any
part thereof at no charge to the original owner. This obligation is
exclusive of transport fees, labor or installation costs, and any other
cost which are not directly associated to the Product. Such repair or
replacement will be rendered by Elitecore at an authorized Elitecore
service facility. The replacement of the Product or any part thereof
need not be new or of an identical make, model, or part; Elitecore
may, at its sole discretion, replace the defective Product or any part
thereof with any reconditioned Product that Elitecore reasonably
determines is substantially equivalent (or superior) in all material
respects to the defective Product or any part thereof. If a material
defect is incapable of correction, or if Elitecore determines in its sole
discretion, that it is not practical to repair or replace the defective
Product, the price paid by the original purchaser for the defective
Product will be refunded by Elitecore upon return to Elitecore of the
defective Product. In such case, the license granted herein in
respect of any Software for which a refund is given shall be
terminated automatically. The Product or any part thereof that is
replaced by Elitecore, or for which the purchase price is refunded,
shall become the property of Elitecore upon replacement or refund.
EXCEPT
FOR THE LIMITED WARRANTY SPECIFIED IN SECTION 6
ABOVE, THE PRODUCT IS PROVIDED "AS IS" WITHOUT ANY
WARRANTY OF ANY KIND INCLUDING, WITHOUT LIMITATION,
ANY WARRANTY OF MERCHANTABILITY, FITNESS FOR A
PARTICULAR PURPOSE AND NONINFRINGEMENT. IF ANY
IMPLIED WARRANTY CANNOT BE DISCLAIMED IN ANY
TERRITORY WHERE A PRODUCT IS SOLD, THE DURATION OF
SUCH IMPLIED WARRANTY SHALL BE LIMITED TO NINETY (90)
DAYS. EXCEPT AS EXPRESSLY COVERED UNDER THE
LIMITED WARRANTY PROVIDED HEREIN, THE ENTIRE RISK
AS TO THE QUALITY, SELECTION AND PERFORMANCE OF
THE PRODUCT IS WITH THE PURCHASER OF THE PRODUCT.
The above warranty does not apply if the Software, Product or any
other equipment upon which the Software is authorized to be used
(a) has been altered, except by Elitecore or its authorized
representative, (b) has not been installed, operated, repaired, or
maintained in accordance with instructions supplied by Elitecore,
(c) has been subjected to abnormal physical or electrical stress,
misuse, negligence, or accident; or (d) is licensed, for beta,
evaluation, testing or demonstration purposes for which Elitecore
does not charge a purchase price or license fee.
This Warranty shall be governed by the laws of
the Republic of India. Some jurisdictions do not allow exclusion or
limitation of incidental or consequential damages, or limitations on
how long an implied warranty lasts, so the foregoing limitations and
exclusions may not apply. This limited warranty provides specific
legal rights and the product owner may also have other rights which
vary from state to state.
TO THE MAXIMUM EXTENT
PERMITTED BY LAW, ELITECORE IS NOT LIABLE UNDER ANY
CONTRACT, NEGLIGENCE, STRICT LIABILITY,
INFRINGEMENT OR OTHER LEGAL OR EQUITABLE THEORY
FOR ANY LOSS OF USE OF THE PRODUCT, INCONVENIENCE
OR DAMAGES OF ANY CHARACTER, WHETHER DIRECT,
SPECIAL, INCIDENTAL OR CONSEQUENTIAL (INCLUDING,
BUT NOT LIMITED TO, DAMAGES FOR LOSS OF GOODWILL,
WORK STOPPAGE, COMPUTER FAILURE OR MALFUNCTION,
COMPUTER SECURITY BREACH, COMPUTER VIRUS
INFECTION, LOSS OF INFORMATION OR DATA CONTAINED IN,
STORED ON, OR INTEGRATED WITH ANY PRODUCT
RETURNED TO ELITECORE FOR WARRANTY SERVICE)
RESULTING FROM THE USE OF THE PRODUCT, RELATING TO
WARRANTY SERVICE, OR ARISING OUT OF ANY BREACH OF
THIS LIMITED WARRANTY, EVEN IF ELITECORE HAS BEEN
ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE
SOLE REMEDY FOR A BREACH OF THE FOREGOING LIMITED
WARRANTY IS REPAIR, REPLACEMENT OR REFUND OF THE
DEFECTIVE OR NONCONFORMING PRODUCT AS
SPECIFICALLY STATED IN SECTION 6 ABOVE. TO THE
MAXIMUM EXTENT PERMITTED BY LAW, NO IMPLIED
WARRANTY, INCLUDING ANY IMPLIED WARRANTY OF
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE,
APPLIES TO THE PRODUCT AFTER THE APPLICABLE PERIOD
OF EXPRESS LIMITED WARRANTY STATED ABOVE, AND NO
OTHER EXPRESS WARRANTY OR QUARNTY, EXCEPT AS
MENTIONEDABOVE.
You agree to be liable and responsible for the
payment of all taxes imposed at any time whatsoever on this
transaction.
Customer shall not assign this Agreement
or transfer any of the rights or obligations under this Agreement
without the prior written consent of Elitecore. This Agreement shall
be binding upon, and insure to the benefit of, the successors and
permitted assigns of the parties. This Agreement will be governed
by the laws of Republic of India, without regard to that body of law
controlling conflicts of law. The United Nations Convention on
Contracts for the International Sales of Goods is disclaimed. In the
event of any claim arising out of this Agreement, the parties herby
submit to the jurisdiction of the courts located in Ahmedabad, India,
as applicable. This Agreement may be amended or supplemented
only by a writing that refers explicitly to thisAgreement signed on
behalf of both parties. No waiver will be implied from conduct or
failure to enforce rights nor effective unless in a writing signed on
behalf of the party against whom the waiver is asserted. If any part of
this Agreement is found unenforceable, that part will be enforced to
the maximum extent permitted, the remainder shall continue in full
force and effect. You acknowledge that you have read this
Agreement, understand, it and agree to be bound by its terms and
conditions. Hardware, including technical data, is subject to the
laws of the Republic of India, including the all the applicable laws
and its associated regulations, and may be subject to export or
import regulations in other countries. Customer agrees to comply
strictly with all such regulations and acknowledges that it has the
responsibility to obtain licensed to export, re-export, or import
hardware.
One of the applications (i.e.
OpenWRT) contain in the Software are open source application and
the same is licensed under GNU GENERAL PUBLIC LICENSE
VERSION 2 (GPL 2)
Version 2, June 1991
Copyright (C) 1989, 1991 Free Software Foundation, Inc.
59 Temple Place, Suite 330, Boston, MA 02111-1307 USAEveryone
is permitted to copy and distribute verbatim copies
of this license document, but changing it is not allowed.
The licenses for most software are designed to take away your
freedom to share and change it. By contrast, the GNU General
Public License is intended to guarantee your freedom to share and
change free software--to make sure the software is free for all its
users. This General Public License applies to most of the Free
Software Foundation's software and to any other program whose
authors commit to using it. (Some other Free Software Foundation
software is covered by the GNU Library General Public License
instead.) You can apply it to your programs, too.
When we speak of free software, we are referring to freedom, not
price. Our General Public Licenses are designed to make sure that
you have the freedom to distribute copies of free software (and
charge for this service if you wish), that you receive source code or
can get it if you want it, that you can change the software or use
pieces of it in new free programs; and that you know you can do
these things.
To protect your rights, we need to make restrictions that forbid
anyone to deny you these rights or to ask you to surrender the rights.
These restrictions translate to certain responsibilities for you if you
distribute copies of the software, or if you modify it.
For example, if you distribute copies of such a program, whether
gratis or for a fee, you must give the recipients all the rights that you
have. You must make sure that they, too, receive or can get the
source code. And you must show them these terms so they know
their rights.
10. Tax Liability.
11. General Provisions.
12. Open Source Software.
Preamble
The GNU General Public License (GPL)
9

We protect your rights with two steps: (1) copyright the software,
and (2) offer you this license which gives you legal permission to
copy, distribute and/or modify the software.
Also, for each author's protection and ours, we want to make certain
that everyone understands that there is no warranty for this free
software. If the software is modified by someone else and passed
on, we want its recipients to know that what they have is not the
original, so that any problems introduced by others will not reflect on
the original authors' reputations.
Finally, any free program is threatened constantly by software
patents. We wish to avoid the danger that redistributors of a free
program will individually obtain patent licenses, in effect making the
program proprietary. To prevent this, we have made it clear that any
patent must be licensed for everyone's free use or not licensed at
all.
The precise terms and conditions for copying, distribution and
modification follow.
This License applies to any program or other work which contains
a notice placed by the copyright holder saying it may be distributed
under the terms of this General Public License. The "Program",
below, refers to any such program or work, and a "work based on the
Program" means either the Program or any derivative work under
copyright law: that is to say, a work containing the Program or a
portion of it, either verbatim or with modifications and/or translated
into another language. (Hereinafter, translation is included without
limitation in the term "modification".) Each licensee is addressed as
"you".
Activities other than copying, distribution and modification are not
covered by this License; they are outside its scope. The act of
running the Program is not restricted, and the output from the
Program is covered only if its contents constitute a work based on
the Program (independent of having been made by running the
Program). Whether that is true depends on what the Program does.
You may copy and distribute verbatim copies of the Program's
source code as you receive it, in any medium, provided that you
conspicuously and appropriately publish on each copy an
appropriate copyright notice and disclaimer of warranty; keep intact
all the notices that refer to this License and to the absence of any
warranty; and give any other recipients of the Program a copy of this
License along with the Program.
You may charge a fee for the physical act of transferring a copy, and
you may at your option offer warranty protection in exchange for a
fee.
You may modify your copy or copies of the Program or any portion
of it, thus forming a work based on the Program, and copy and
distribute such modifications or work under the terms of Section 1
above, provided that you also meet all of these conditions:
a) You must cause the modified files to carry prominent notices
stating that you changed the files and the date of any change.
b) You must cause any work that you distribute or publish, that in
whole or in part contains or is derived from the Program or any part
thereof, to be licensed as a whole at no charge to all third parties
under the terms of this License.
c) If the modified program normally reads commands interactively
when run, you must cause it, when started running for such
interactive use in the most ordinary way, to print or display an
announcement including an appropriate copyright notice and a
notice that there is no warranty (or else, saying that you provide a
warranty) and that users may redistribute the program under these
conditions, and telling the user how to view a copy of this License.
(Exception: if the Program itself is interactive but does not normally
print such an announcement, your work based on the Program is
not required to print an announcement.)
These requirements apply to the modified work as a whole. If
identifiable sections of that work are not derived from the Program,
and can be reasonably considered independent and separate
works in themselves, then this License, and its terms, do not apply
TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION
AND MODIFICATION
0.
1.
2.
to those sections when you distribute them as separate works. But
when you distribute the same sections as part of a whole which is a
work based on the Program, the distribution of the whole must be on
the terms of this License, whose permissions for other licensees
extend to the entire whole, and thus to each and every part
regardless of who wrote it.
Thus, it is not the intent of this section to claim rights or contest your
rights to work written entirely by you; rather, the intent is to exercise
the right to control the distribution of derivative or collective works
based on the Program.
In addition, mere aggregation of another work not based on the
Program with the Program (or with a work based on the Program) on
a volume of a storage or distribution medium does not bring the
other work under the scope of this License.
You may copy and distribute the Program (or a work based on it,
under Section 2) in object code or executable form under the terms
of Sections 1 and 2 above provided that you also do one of the
following:
a) Accompany it with the complete corresponding machine-
readable source code, which must be distributed under the terms of
Sections 1 and 2 above on a medium customarily used for software
interchange; or,
b) Accompany it with a written offer, valid for at least three years, to
give any third party, for a charge no more than your cost of physically
performing source distribution, a complete machine-readable copy
of the corresponding source code, to be distributed under the terms
of Sections 1 and 2 above on a medium customarily used for
software interchange; or,
c) Accompany it with the information you received as to the offer to
distribute corresponding source code. (This alternative is allowed
only for noncommercial distribution and only if you received the
program in object code or executable form with such an offer, in
accord with Subsection b above.)
The source code for a work means the preferred form of the work for
making modifications to it. For an executable work, complete source
code means all the source code for all modules it contains, plus any
associated interface definition files, plus the scripts used to control
compilation and installation of the executable. However, as a
special exception, the source code distributed need not include
anything that is normally distributed (in either source or binary form)
with the major components (compiler, kernel, and so on) of the
operating system on which the executable runs, unless that
component itself accompanies the executable.
If distribution of executable or object code is made by offering
access to copy from a designated place, then offering equivalent
access to copy the source code from the same place counts as
distribution of the source code, even though third parties are not
compelled to copy the source along with the object code.
You may not copy, modify, sublicense, or distribute the Program
except as expressly provided under this License. Any attempt
otherwise to copy, modify, sublicense or distribute the Program is
void, and will automatically terminate your rights under this License.
However, parties who have received copies, or rights, from you
under this License will not have their licenses terminated so long as
such parties remain in full compliance.
You are not required to accept this License, since you have not
signed it. However, nothing else grants you permission to modify or
distribute the Program or its derivative works. These actions are
prohibited by law if you do not accept this License. Therefore, by
modifying or distributing the Program (or any work based on the
Program), you indicate your acceptance of this License to do so,
and all its terms and conditions for copying, distributing or modifying
the Program or works based on it.
Each time you redistribute the Program (or any work based on the
Program), the recipient automatically receives a license from the
original licensor to copy, distribute or modify the Program subject to
these terms and conditions. You may not impose any further
restrictions on the recipients' exercise of the rights granted herein.
You are not responsible for enforcing compliance by third parties to
this License.
3.
4.
5.
6.
10

7.
8.
9.
10.
If, as a consequence of a court judgment or allegation of patent
infringement or for any other reason (not limited to patent issues),
conditions are imposed on you (whether by court order, agreement
or otherwise) that contradict the conditions of this License, they do
not excuse you from the conditions of this License. If you cannot
distribute so as to satisfy simultaneously your obligations under this
License and any other pertinent obligations, then as a consequence
you may not distribute the Program at all. For example, if a patent
license would not permit royalty-free redistribution of the Program
by all those who receive copies directly or indirectly through you,
then the only way you could satisfy both it and this License would be
to refrain entirely from distribution of the Program.
If any portion of this section is held invalid or unenforceable under
any particular circumstance, the balance of the section is intended
to apply and the section as a whole is intended to apply in other
circumstances.
It is not the purpose of this section to induce you to infringe any
patents or other property right claims or to contest validity of any
such claims; this section has the sole purpose of protecting the
integrity of the free software distribution system, which is
implemented by public license practices. Many people have made
generous contributions to the wide range of software distributed
through that system in reliance on consistent application of that
system; it is up to the author/donor to decide if he or she is willing to
distribute software through any other system and a licensee cannot
impose that choice.
This section is intended to make thoroughly clear what is believed to
be a consequence of the rest of this License.
If the distribution and/or use of the Program is restricted in certain
countries either by patents or by copyrighted interfaces, the original
copyright holder who places the Program under this License may
add an explicit geographical distribution limitation excluding those
countries, so that distribution is permitted only in or among countries
not thus excluded. In such case, this License incorporates the
limitation as if written in the body of this License.
The Free Software Foundation may publish revised and/or new
versions of the General Public License from time to time. Such new
versions will be similar in spirit to the present version, but may differ
in detail to address new problems or concerns.
Each version is given a distinguishing version number. If the
Program specifies a version number of this License which applies to
it and "any later version", you have the option of following the terms
and conditions either of that version or of any later version published
by the Free Software Foundation. If the Program does not specify a
version number of this License, you may choose any version ever
published by the Free Software Foundation.
If you wish to incorporate parts of the Program into other free
programs whose distribution conditions are different, write to the
author to ask for permission. For software which is copyrighted by
the Free Software Foundation, write to the Free Software
Toll Free Numbers
USA :
:
+1-
1-800-301-00013
877-777-0368
India
Visit: www.cyberoam.com
Contact beroam.com:sales@cy
Powered by
Corporate Headquarters
Elitecore Technologies.
904, Silicon Tower, Off C.G. Road
Ahmedabad 380015, Gujarat, India.
Phone: [phone], Fax: [phone]
Web site: www.elitecore.com
Foundation; we sometimes make exceptions for this. Our decision
will be guided by the two goals of preserving the free status of all
derivatives of our free software and of promoting the sharing and
reuse of software generally.
BECAUSE THE PROGRAM IS LICENSED FREE OF
CHARGE, THERE IS NO WARRANTY FOR THE PROGRAM, TO
THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT
WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT
HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM
"AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER
EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO,
THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS
TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS
WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU
ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR
OR CORRECTION.
IN NO EVENT UNLESS REQUIRED BYAPPLICABLE LAW OR
AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR
ANY OTHER PARTY WHO MAY MODIFY AND/OR
REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE
LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL,
SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES
ARISING OUT OF THE USE OR INABILITY TO USE THE
PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF DATA
OR DATA BEING RENDERED INACCURATE OR LOSSES
SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF
THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS),
EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN
ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
SOURCE CODE REQUEST
Upon payment of cost of USD 35/-, Elitecore shall provide the
complete machine-readable copy of the open source software
referred above (collectively herein after referred as “OSS”). Anyone
who wishes to obtain such copy from Elitecore shall have to make a
written request to Legal Department, Elitecore Technologies Private
Limited, 904, Silicon Tower, off. C.G. Road, Ahmedabad 380006
and shall make payment of USD 35/-. Such written request shall
contain details of the person seeking such OSS which shall include
Name, Address, Telephone No., Email address, Serial No. of
NetGenie purchase by him (if so purchased), etc. Such OSS so
supplied hereunder by Elitecore shall be free of any charge.
Provided however, Elitecore shall not give any warranty of
whatsoever nature in respect of such OSS and that the OSS shall be
provided “AS IS”. Elitecore shall not be responsible for any damage
of whatsoever nature due to use of OSS supplied hereunder.
NO WARRANTY
11.
12.
END OF TERMSAND CONDITIONS
Technical Support
You may direct all questions, comments, or requests
concerning the software you purchased, your registration
status, or similar issues to Customer care/service department
at the following address:
Email: [email protected]
Web site: http://netgenie.cyberoam.com
Visit for the regional and latest contact information.www.cyberoam.com