CYDHYTEAM HY-18 User manual

ҍ݁ړஉ
ֵ⭞䈪᱄Ҝ
7)গ″
USB
丩仇䗉ޛ
ݻ⭫
⭫Ⓠᔶީ⁗ᕅ࠽ᦘ
сжᴨ丩䠅ࣖ ржᴨ丩䠅ࠅ
Ჸڒ󰪄᭴ᤞ
USB
Power on/off
Mode switch
User Manual
Next / Volume up
Previous / Volume down
Play/Pause/Call
AUX
TF Card
Charging port
ؾت͹SS
᝕䉘ᛞ䍣Ҧᵢޢӝ૷θᛞ൞ֵ⭞ҁࢃ䈭Ԋ㓼䰻䈱ᵢӝ૷䈪᱄
ᢁ߂θᡇሯഖֵ⭞уᖉ䙖ᡆⲺӰ䓡՚ᇩᡌӝ૷ᦕඅуᢵ᣻Ա֋
䍙ԱȾ
▁ ࢟ࠆړ
㬓⢏⡾ᵢBluetooth 4.2θ᭥ᤷiosθᆿউㅿ䇴༽Ⱦ
䮵᤿ᔶᵰ᤿䭤θᵢᵰ䘑ޛ㬓⢏⁗ᕅθ丩㇧Ր࠰㬓⢏Ⲻᨆ⽰丩θ
ᵢᵰ䘑ޛ䞃ሯ⣬ᢁᵰᩒ㍘ࡦ㬓⢏䞃ሯθ⛯࠱঩䘔᧛ᡆࣕȾ
з:,ԩࠆړ;9(
ᔶᵰᨈޛTFগ86%θ㠠ࣞ䘑ޛTFগ86%󰪄᭴⁗ᕅȾ
ᤊ࠰7)গ86%θ丩㇧㠠ࣞ䘑ޛ㬓⢏⁗ᕅȾ
Ѕ2OTKOTࠆړ
ᔶᵰᨈޛLine in㓵θ㠠ࣞ䘑ޛLine in⁗ᕅȾ
ᤊ࠰Line in㓵θ丩㇧㠠ࣞ䘑ޛ㬓⢏⁗ᕅȾ
֙,3ݗஉࠆړ
ᔶᵰθሼ䳅ᵰ䞃Ⲻݻ⭫㓵ᨈޛDC 5Vㄥθݻᖉཌ㖤ཟ㓵θ
ᵰᆆ䘑ޛ㬓⢏⁗ᕅθ⸣᤿࠽ᦘ䭤䘑ޛFM⁗ᕅθ⸣᤿ćĈ䭤䘑ޛ
㠠ࣞᩒ⁗ᕅθᩒ㍘ᇂ∋᤿ćĈćĈ࠽ᦘ⭫Ⱦ
лҬࣔ
ሼUSB䘔᧛㓵ᨈޛ丩㇧䘔᧛5V1Aݻ⭫ಞሯ丩㇧޻㖤⭫⊖
ݻ⭫Ⱦ
ݻ⭫ᰬćݻ⭫Ĉ᤽⽰⚥㓘⚥Ӥθݻ┗㓘⚥⚣Ⱦ
ҸԄৗԿݤ
޻㖤䬸⭫⊖⭫ু3.7Vݻ⭫⭫ু5V
仇⦽ଃᓊ60HZ-20KHZݻ⭫⭫⍷ 1A
ؗಠ∊Ő75dBተሮ120*80*83(mm)
䗉࠰ࣕ⦽5W
ЃԔ࡯Ԥ
ཐ჈։丩㇧USBݻ⭫㓵ᶗ
丩仇ؗ㓵ᶗӝ૷䈪᱄ҜԳ
(luetooth model
1. Bluetooth version: Bluetooth 4.2, support ios, Android and other devices.
2. long press the power button, into Bluetooth mode, the speaker will issue
prompt tone.The machine enters the paired mobile phone and searches for
the Bluetooth pairing name. Click to connect successfully.
TF Card Mode & USB
1. Insert TF card & USB after power on, and enter TF card & USB play mo-
de automatically.
2. Pull out the TF card & USB and the speaker automatically enters Blueto-
oth mode.
Line in mode
1. Insert the Line in line after power on, and enter Line in mode automatica-
lly.
2. Pull out the Line in cable and the speaker automatically enters Bluetooth
mode.
FM radio mode
1. After booting, insert the random charging cable into the DC 5V port to act
as an external antenna.The machine enters the Bluetooth mode, short pre-
ss the switch button to enter the FM mode, short press the "+" button to en-
ter Automatic search mode, after the search is completed press "-" / "+" to
switch radio stations.
Charge
1. Insert the USB cable into the speaker. Connect the 5V1A charger to the
speaker's internal battery Charging.
2. The red LED lights up when charging, and the red light goes off when it
is full.
Function parameters
Built-in lithium battery voltage: 3.7V Charging voltage: 5V
Frequency Response: 60HZ-20KHZ Charging Current: 1A

Output power: 5W
Packing list
Multimedia Speaker ---- 1pc USB Charging Cable ---- 1pc
Audio Cable ----1 pc User Manual ----1 pc
Thank you for choosing our products. Please read this product manual
carefully before use.our company does not bear any responsibility for per-
sonal injury or product damage caused by improper use.
Bluetooth speaker

FCC WARNING
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause
undesired operation.
NOTE 1: Any changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user's authority to operate the equipment.