CYP CPLUS-V8H8HPA User manual

CPLUS-V8H8HPA
UHD+8x8 Matrix with Audio Output
Operation Manual
Operation Manual

DISCLAIMERS
The information in this manual has been carefully checked and
is believed to be accurate. Cypress Technology assumes no
responsibility for any infringements of patents or other rights of third
parties which may result from its use.
Cypress Technology assumes no responsibility for any inaccuracies
that may be contained in this document. Cypress also makes no
commitment to update or to keep current the information contained
in this document.
Cypress Technology reserves the right to make improvements to this
document and/or product at any time and without notice.
COPYRIGHT NOTICE
No part of this document may be reproduced, transmitted,
transcribed, stored in a retrieval system, or any of its part translated
into any language or computer le, in any form or by any means—
electronic, mechanical, magnetic, optical, chemical, manual, or
otherwise—without express written permission and consent from
Cypress Technology.
© Copyright 2018 by Cypress Technology.
All Rights Reserved.
TRADEMARK ACKNOWLEDGMENTS
All products or service names mentioned in this document may be
trademarks of the companies with which they are associated.

SAFETY PRECAUTIONS
Please read all instructions before attempting to unpack, install or
operate this equipment and before connecting the power supply.
Please keep the following in mind as you unpack and install this
equipment:
• Always follow basic safety precautions to reduce the risk of re,
electrical shock and injury to persons.
• To prevent re or shock hazard, do not expose the unit to rain,
moisture or install this product near water.
• Never spill liquid of any kind on or into this product.
• Never push an object of any kind into this product through any
openings or empty slots in the unit, as you may damage parts
inside the unit.
• Do not attach the power supply cabling to building surfaces.
• Use only the supplied power supply unit (PSU). Do not use the PSU
if it is damaged.
• Do not allow anything to rest on the power cabling or allow any
weight to be placed upon it or any person walk on it.
• To protect the unit from overheating, do not block any vents or
openings in the unit housing that provide ventilation and allow for
sufcient space for air to circulate around the unit.
• Please completely disconnect the power when the unit is not in
use to avoid wasting electricity.
VERSION HISTORY
REV. DATE SUMMARY OF CHANGE
RDV1 2019/08/12 Preliminary release

CONTENTS
1. Introduction......................................................1
2. Applications.....................................................1
3. Package Contents ..........................................1
4. System Requirements......................................2
5. Features............................................................2
6. Operation Controls and Functions.................3
6.1 Front Panel................................................. 3
6.2 Rear Panel.................................................. 5
6.3 Remote Control......................................... 6
6.4 IR Cable Pinouts ........................................ 7
6.5 RS-232 Pinout and Defaults...................... 7
6.6 Front Panel LCD Menu.............................. 8
6.7 WebGUI Control...................................... 14
6.7.1 Video Switch Tab........................... 16
6.7.2 EDID Settings Tab ........................... 20
6.7.3 Device Settings Tab....................... 22
6.7.4 User Cong Tab.............................. 23
6.7.5 System Settings Tab ....................... 24
6.8 Telnet Control.......................................... 25
6.9 Serial and Telnet Commands................ 26
7. Connection Diagram ....................................41
8. Specications ................................................42
8.1 Technical Specications ........................ 42
8.2 Video Specications............................... 43
8.3 Audio Specications............................... 44
8.3.1 Digital Audio................................... 44
8.3.2 Analog Audio................................. 45
8.4 Cable Specications .............................. 45
9. Acronyms.......................................................46

1
1. INTRODUCTION
This 4K UHD+ 8×8 HDMI Matrix provides the ability to connect up to
eight 4K UHD+HDMI sources to up to eight 4K UHD+HDMI displays
and freely switch between them. This unit comes with full support
for 18Gbps resolutions up to, and including 4K@60Hz (4:4:4, 8-bit) as
well as support for 16-bit Deep Color, HDR (High Dynamic Range),
HD audio and other features dened by the HDMI 2.0 specication.
Additionally, eight analog stereo audio outputs are paired with each
HDMI output to provide breakout audio support when needed. With
a comprehensive EDID management feature that includes the ability
to select between built in EDIDs, EDIDs copied from connected sink
devices, as well as user provided EDIDs, this matrix can solve many
interconnectivity problems.
The unit’s OSD has the ability to display up to 2 lines of user customized
text, on top of the video displayed over each output, in the color of
your choice. This unit provides an intuitive set of front panel controls
with an OSD as well as RS-232, Telnet, WebGUI, and IR remote control
options.
2. APPLICATIONS
• Smart Home Control
• Control Center
• Function Room
• Product Showroom
• Ballroom
3. PACKAGE CONTENTS
• 1×UHD+ 8x8 Matrix with Audio Output
• 1×24V/3.75A DC Power Adapter
• 1×Remote Control (CR-177)
• 1×Rackmount Ears (Set of 2)
• 1×Shockproof Feet (Set of 4)
• 1×Operation Manual

2
4. SYSTEM REQUIREMENTS
• HDMI source equipment such as media players, video game
consoles or set-top boxes.
• HDMI receiving equipment such as HDTVs, monitors or audio
ampliers.
• The use of Premium High Speed HDMI cables is highly
recommended.
5. FEATURES
• HDMI inputs and outputs support 18Gbps 4K UHD+with HDR signals
• DVI 1.0 compliant with the use of an HDMI to DVI adapter
• HDCP 1.x and 2.2 compliant
• HDMI inputs and outputs support UHD+resolutions up to
4096×2160@60Hz (4:4:4, 8-bit)
• Supports 16-bit Deep Color up to 1080p60
• Supports pass-through of LPCM (up to 8 channels), bitstream and
HD bitstream audio formats
• High-quality DAC (Digital to Analog audio Conversion) with local
analog stereo audio breakout for each HDMI output (LPCM 2.0
sources only)
• Supports six internal EDIDs, eight external EDIDs copied from
connected devices, and eight user provided EDIDs
• OSD with user customizable information text
• Controllable via front-panel buttons with LCD, WebGUI, Telnet, RS-232,
and IR remote

3
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Front Panel
POWER
IN 1 IN 2 IN 3 IN 4
OUTA OUT B OUT C OUT D CANCEL
IN 5
OUT E
IN 6
OUT F
IN 7
OUT G
IN 8
OUT H
CONFIRM ENTER
MENU
PRESET
ALL LOCK
+
-
MUTE
+
8x8 4K UHD+Matrix with Audio
1 2 3
4 6 9 11
5 7 8 10 12 13
1POWER Button: Press this button to power the unit on (green LED)
or place it into stand-by mode (red LED).
2IR Window: Accepts IR signals from the included IR remote for
control of this unit only.
3IN 1~8 & OUT A~H Buttons: Press these buttons to congure the
video routing. Selection behavior depends on the current Keypad
Action Mode.
3a In Standard Mode: Press the “OUT” buttons (A~H) of the outputs
you wish to route a source to (the letters will ash in the LCD to
indicate selection). Next, press the “IN” button of the input (1~8)
you wish to route to the selected outputs. Finally, press “CONFIRM”
to conrm your selection and execute the routing change.
3b In User Mode: Press the “OUT” button (A~H) of an output you wish
to route a source to (the letter will ash in the LCD to indicate
selection). Next, press the “IN” button of the input (1~8) you wish
to route to the selected output. Repeat this process as many times
as needed to select all new routes. Finally, press “CONFIRM” to
conrm your selections and execute the routing changes.
4CONFIRM Button: Press this button to conrm newly made input/
output routing selections.
5CANCEL Button: Press this button to cancel newly made input/
output/preset routing selections before they have been
conrmed.
6MENU Button: Press to enter the LCD menu, or to back out from
menu items.

4
7ENTER Button: Press to conrm a selection within the LCD menu or
to go deeper into a menu item.
8+ (PLUS) & - (MINUS) Buttons: Press to move up and down or adjust
selections within the LCD menu.
9ALL Button: Press this button to select all outputs simultaneously
for routing. Next, press the “IN” key of the input (1~4) you wish
to route to all outputs. Finally, press “CONFIRM” to conrm your
selection and execute the routing change.
10 PRESET Button: Press to enter the preset recall menu in the LCD
window. Press the “+/-” buttons followed by the “ENTER” button to
select and activate the preferred preset.
11 LOCK Button: Press to lock all button functions on the front panel.
Press and hold for 3 seconds to release the lock function. The LCD
will display “Lock” when the function is active.
12 MUTE Button: The “MUTE” button functions as a blank audio/video
source. To use it, follow the standard matrix routing instructions,
but use the “MUTE” button as the input to blank out the selected
outputs. When a “MUTE” input is in use it will show up as “M” within
the routing display.
13 LCD Window: Displays the unit’s menu, settings and information.

5
6.2 Rear Panel
ABCDEFGH
HDMI OUT
CONTROL RS232 SERVICE DC 24V
12345678
HDMI IN
IR IN
AUDIO OUT
ABCDEFGH
1 2
3 6
5
47 8
1HDMI IN 1~8 Ports: Connect to HDMI source equipment such as
media players, game consoles or set-top boxes.
2HDMI OUT A~H Ports: Connect to HDMI TVs, monitors, or ampliers
for digital video and audio output.
3AUDIO OUT A~D Ports: Connect to powered speakers or an
amplier for analog stereo audio output. The audio from each
stereo analog output will be the same as the HDMI output it is
paired with.
Note: Supports LPCM 2.0 audio sources only.
4IR IN Port: Connect to the provided IR Extender to extend the IR
control range of the unit. Ensure that the remote being used is
within direct line-of-sight of the IR Extender.
5CONTROL Port: Connect directly, or through a network switch, to
your PC/laptop to control the unit via Telnet/WebGUI.
6RS232 Port: Connect directly to a PC, laptop or other serial control
device to send RS-232 commands to control the unit.
7SERVICE Port: This slot is reserved for rmware update use only.
8DC 24V Port: Plug the 24V DC power adapter into the unit and
connect it to an AC wall outlet for power.