3
ifm Operating Instructions IO-Link Master with PROFINET interface PowerLine 4 Ports IP 65 / IP 66 / IP 67 (AL1200) 05 / 2018
Content
8Configuration 21
8.1 LR DEVICE........................................................................................................................22
8.1.1 Remarks.....................................................................................................................................23
8.1.2 IoT: Configure access rights.......................................................................................................24
8.1.3 IoT: Configure the interface to the LR SMARTOBSERVER.......................................................25
8.1.4 Fieldbus: Set PROFINET interface.............................................................................................25
8.1.5 IO-Link ports: Activate data transfer to the LR SMARTOBSERVER..........................................26
8.1.6 IO-Link ports: Configure operating mode....................................................................................27
8.1.7 IO-Link ports: Set the device validation and data storage ..........................................................28
8.1.8 Firmware: Reset device to factory settings.................................................................................29
8.1.9 Firmware: Reboot the device......................................................................................................29
8.1.10 Configure IO-Link devices..........................................................................................................30
8.2 PROFINET.........................................................................................................................31
8.2.1 Install GSD file............................................................................................................................32
8.2.2 Add the IO-Link master to the PROFINET network....................................................................33
8.2.3 Configure access rights..............................................................................................................35
8.2.4 Configure IO-Link ports ..............................................................................................................36
8.2.5 Configure the PROFINET port....................................................................................................37
8.2.6 Configure IO-Link devices..........................................................................................................37
8.2.7 Read and write data cyclically....................................................................................................38
8.2.8 PROFINET: Read & write device information.............................................................................38
8.2.9 PROFINET: Programmers' notes...............................................................................................39
9Operation 42
9.1 Identify device....................................................................................................................42
9.2 Web interface: Read device and diagnostic information....................................................43
9.3 Firmware update................................................................................................................44
9.4 Replace IO-Link device......................................................................................................45
10 Maintenance 46
11 Factory settings 47
12 Accessories 48
13 Appendix 49
13.1 Technical data....................................................................................................................50
13.1.1 Application..................................................................................................................................50
13.1.2 Electrical data.............................................................................................................................51
13.1.3 Inputs / outputs...........................................................................................................................52
13.1.4 Inputs..........................................................................................................................................52
13.1.5 Outputs.......................................................................................................................................52
13.1.6 Interfaces....................................................................................................................................52
13.1.7 Operating conditions ..................................................................................................................53
13.1.8 Approvals / tests.........................................................................................................................53
13.1.9 Mechanical data.........................................................................................................................53
13.1.10 Electrical connection ..................................................................................................................54
13.2 PROFINET.........................................................................................................................55
13.2.1 Parameter data...........................................................................................................................55
13.2.2 Cyclic data..................................................................................................................................58
13.2.3 Acyclic data................................................................................................................................60
